1、 AMSC N/A FSC 6145 INCH-POUND MIL-DTL-27072/65C 12 March 2012 SUPERSEDING MIL-DTL-27072/65B8 December 2000 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR (10 CONDUCTORS) AND SINGLE SHIELDED, M27072/65MACA* This specification is approved for use by all Departments and A
2、gencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27072. REQUIREMENTS: SHEATH POLYVINYL CHLORIDESHIELD TINNED COPPERWHITEREDWHITEORANGEWHITEGREENWHITEBLACKWHITEBROWNWHITEBLUEWHITEBLACKBROWNWHITEBLAC
3、KREDWHITEBLACKBLACKWHITEVIOLETFILLERTAPE POLYETHYLENETEREPHTHALATENOTE: The complete Part or Identifying Number (PIN) requires a color code designator (see table I). FIGURE 1. Cable configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D
4、TL-27072/65C 2 Design and construction: See figure 1 Number of conductors: 10 Temperature rating: 105 C Components: Basic wire: M16878/17BFB* (see table I) Conductor: Tinned copper Primary insulation: Polyvinyl Chloride Colors: White with black tracer White with brown tracer White with red tracer Wh
5、ite with orange tracer White with green tracer White with blue tracer White with violet tracer White with two black tracers White with black and brown tracers White with black and red tracers Jacket over insulation: Polyamide Color: Natural Filler: See filler information herein Cabling: Core: Number
6、 of conductors: 2 Filler: Material: In accordance with MIL-DTL-27072 Pitch or lay: 1.75 inches maximum First layer: Number of conductors: 8 Filler: Material: In accordance with MIL-DTL-27072 Pitch or lay: 3.50 inches maximum Binder tape material: Polyethylene terephthalate Shield: Material: Tinned c
7、opper Gauge: 36 AWG Braid angle: 20 to 40 degrees Jacket undershield: Not applicable Sheath: Material: Polyvinyl chloride Wall thickness: .025 inch nominal Tensile strength: In accordance with MIL-DTL-27072 Ultimate elongation: In accordance with MIL-DTL-27072 Accelerated aging: In accordance with M
8、IL-DTL-27072 Color: See MIL-DTL-27072 Finished cable: See table I Cold bend: Mandrel size in accordance with MIL-DTL-27072 Dielectric withstanding voltage: 2,000 V rms Conductor resistance: In accordance with basic wire specification Provided by IHSNot for ResaleNo reproduction or networking permitt
9、ed without license from IHS-,-,-MIL-DTL-27072/65C 3 TABLE I. Construction data. PIN 27072/65 Basic wire except color M16878/17BFB*1/,2/(reference) Finished cable diameter inch(mm) 10% Wire size (AWG) Number of strands Strand size Nominal diameter inch(mm) MACA 22 7 30 .056(1.42) .310(7.87) 1/ Asteri
10、sks (*) shall be replaced by the appropriate color designator. 2/ Dimensions are in inches. Metric equivalents are given for information only. Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issues due to the extensivenes
11、s of the changes. Referenced document. This document references MIL-DTL-27072. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 6145-2012-025) DLA CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
