1、AMSC N/A FSC 5895 MIL-DTL-28837/1D 5 July 2012 SUPERSEDING MIL-DTL-28837/1C 30 October 2001 DETAIL SPECIFICATION SHEET MIXER STAGES, RADIO FREQUENCY, DOUBLE BALANCED, PIN PLUG-IN TERMINATION This specification is approved for use by all Departments and Agencies of the Department of Defense. The requ
2、irements for acquiring the product described herein shall consist of this specification and MIL-DTL-28837. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Pin number 1 shall have a contrasting color insulator, all pin numbers are to be marked on s
3、ides of case adjacent to the pins. The marking on the header is for reference only. Termination for PIN M28837/01-01 and M28837/01-13 LO - Pins 1 and 5 RF - Pins 4 and 8 IF is formed by externally connecting pins 2 and 6 together and 3 and 7 together Termination for PIN M28837/01-02 and M28837/1-14
4、LO - 1 and 5 RF - Pins 4 and 8 Pins 2, 4, and 6 are internally connected to case. IF is formed by externally connecting pins 3 and 7 together and using the case for reference. FIGURE 1. Outline drawing for mixers PIN M28837/1-01, M28837/1-02, M28837/1-13, and M28837/1-14. INCH-POUND Dimension Ltr In
5、ches mm Min Max Min Max A .190 .210 4.83 5.33 B .165 .205 4.19 5.21 C .028 DIA .032 DIA 0.71 DIA 0.81 DIA D .195 .205 4.95 5.21 E .195 .205 4.95 5.21 F .080 .110 2.03 2.79 G .370 .400 9.40 10.16 H .080 .110 2.03 2.79 J .770 .800 19.60 20.32 Provided by IHSNot for ResaleNo reproduction or networking
6、permitted without license from IHS-,-,-MIL-DTL-28837/1D 2 Dimension Ltr Inches mm Min Max Min Max A - .400 - 10.16 B .165 .205 4.19 5.21 C .028 DIA .032 DIA 0.71 DIA 0.81 DIA D .195 .205 4.95 5.21 E .195 .205 4.95 5.21 F .080 .110 2.03 2.79 G .370 .400 9.40 10.16 H .080 .110 2.03 2.79 J .770 .800 19
7、.60 20.32 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Pin number 1 shall have a contrasting color insulator, all pin numbers are to be marked on sides of case adjacent to the pins. The marking on the header is for reference only. Termination f
8、or PIN M28837/01-03, -M28837/01-08, and M28837/01-09 LO - Pins 7 and 8 RF - Pins 1 and 2 IF is formed by externally connecting pins 3 and 4 together for the grounded side. FIGURE 2. Outline drawing for mixers PIN M28837/1-03, M28837/1-08, and M28837/1-09. Provided by IHSNot for ResaleNo reproduction
9、 or networking permitted without license from IHS-,-,-MIL-DTL-28837/1D 3 Dimension Ltr Inches mm Min Max Min Max A .400 .425 10.16 10.80 B .165 .205 4.19 5.21 C .028 DIA .032 DIA 0.71 DIA 0.81 DIA D .195 .205 4.95 5.21 E .195 .205 4.95 5.21 F .080 .110 2.03 2.79 G .370 .400 9.40 10.16 H .080 .110 2.
10、03 2.79 J .770 .800 19.60 20.32 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Pin number 1 shall have a contrasting color insulator, all pin numbers are to be marked on sides of case adjacent to the pins. The marking on the header is for referen
11、ce only. Termination for PIN M28837/01-04 and M28837/01-12 LO - Pins 1 and 5 RF - Pins 4 and 8 IF is formed by externally connecting pins 3 and 7 together for the grounded side and using pins 2 and 6 for the ground side. FIGURE 3. Outline drawing for mixers PIN M28837/1-04 and M28837/1-12. Provided
12、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28837/1D 4 Dimension Ltr Inches mm Min Max Min Max A .390 .430 9.91 10.92 B .100 .130 2.54 3.30 C .023 DIA .027 DIA 0.58 DIA 0.69 DIA D .295 .305 7.49 7.75 E .295 .305 7.49 7.75 F .090 .130 2.29 3.30 G .
13、500 .525 12.7 13.34 H .090 .130 2.29 3.30 J 1.000 1.025 25.4 26.04 K .795 .805 20.19 20.45 L .495 .505 12.57 12.83 M .145 .155 3.68 3.94 N - .040 - 1.02 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Pin number 1 shall have a contrasting color in
14、sulator, all pin numbers are to be marked on sides of case adjacent to the pins. The marking on the header is for reference only. Termination for PIN 28837/1-05, M28837/1-06, M28837/1-07 and M28837/1-10 LO - Pins 1 and 2 RF - Pins 5 and 6 IF - Pins 3 and 4. FIGURE 4. Outline drawing for mixers PIN M
15、28837/1-05, M28837/1-06, M28837/1-07 and M28837/1-10. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28837/1D 5 Dimension Ltr Inches mm Min Max Min Max A .297 .327 7.54 8.31 B .188 .218 4.78 5.54 C .028 DIA .032 DIA 0.71 DIA 0.81 DIA D .195
16、.205 4.95 5.21 E .195 .205 4.95 5.21 F .080 .110 2.03 2.79 G .370 .400 9.40 10.16 H .080 .110 2.03 2.79 J .775 .805 19.69 20.45 Termination for PIN M28837/1-11 LO - Pins 4 and 8 RF - Pins 1 and 5 IF - Pins 3 and 7 Pins 2, 4, and 6 are grounded Termination for PIN M28837/1-15 and M28837/1-16 LO - Pin
17、 5 RF - Pin 8 IF - Pins 3 and 7 All other pins are grounded. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Pin number 1 shall have a contrasting color insulator, all pin numbers are to be marked on sides of case adjacent to the pins. The marking
18、 on the header is for reference only. FIGURE 4. Outline drawing for mixers PIN M28837/1-11, M28837/1-15, and M28837/1-16. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28837/1D 6 NOTE: The phase balance test shall be performed in accordance
19、 with figure 6. When any difference from the mean reading (approximately -0.35 volts) on the VTVM is greater than 0.05 volts, the mixer fails this test. FIGURE 6. Phase balance test setup for PIN M28837/1-01 and M28837/1-02. Provided by IHSNot for ResaleNo reproduction or networking permitted withou
20、t license from IHS-,-,-MIL-DTL-28837/1D 7 REQUIREMENTS: Design and construction: Dimensions and configuration: See figures 1 through 6. Electrical characteristics: Operating frequency range: See table I. LO drive power: See table I. Conversion loss (max): See table I. Noise figure (SSB): See table I
21、. Isolation (minimum): See table I. Maximum input power (rms): See table I. Conversion compression (max): See table I. Desensitization (max): See table I. DC relative polarity: See table I. VSWR: See table I. Third order two-tone intermodulation: See table I. Impedance: 50 ohms. Physical and environ
22、mental characteristics: Weight: See table II. Temperature range: See table II. Mechanical shock: See table II. Hermetic seal: See table II. Terminal strength: See table II. Life: See table II. Part or Identifying Number (PIN) Space flight mixers shall be marked with “T”, M28837/1- 01 T Provided by I
23、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Physical and environmental characteristics. 1/ Dash no. Operating frequency range (MHz) LO input drive power in dBm 2/ Maximum conversion loss (SSB) dB MHz Noise figure (SSB) dB MHz Isolation Minimum Freque
24、ncy MHz LO-RF LO-IF RF-IF dB dB dB 01N 01S LO .05-200 RF .05-200 IF DC-200 minimum +4 TV +7 maximum +13 6.5 at fLand fR0.2-50 fIDC-50 6.5 at fLand fR1-50 fI0.4-50 45 35 40 30 N/A N/A .05-30 30-200 8.0 at fLand fR50-200 fIDC-200 8.0 at fLand fR50-200 fI0.4-200 8.5 at fLand fR0.05-0.2 fIDC-0.4 N/A 02N
25、 02S LO 5-500 RF 5-500 IF DC-500 minimum +4 TV +7 maximum +13 7.0 at fLand fR5-150 fI0.4-150 7.0 at fLand fR10-100 fI0.4-100 45 30 40 25 N/A N/A 5-50 50-500 9.0 at fLand fR150-500 fI0.4-500 9.0 at fLand fR100-500 fI0.4-500 03N 03S LO .5-500 RF .5-500 IF DC-500 TV +7 7.5 at fLand fR1-250 fIDC-250 N/A
26、 35 30 25 30 25 20 N/A N/A N/A 0.5-1 1-250 250-500 8.5 at fLand fR0.5-500 fIDC-500 See footnotes at end of table. MIL-DTL-28837/1D8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics - Continued. 1/ Dash no. RF and LO
27、4/ maximum power input (rms) Conversion compression (maximum) Desensitization (maximum) Relative dc polarity 5/ VSWR (maximum) Third order, two tone intermodulation LO IF RF dBm Frequencies 01N 01S 50 mW N/A N/A Negative 02N 02S 400 mW N/A N/A Negative 03N 03S 350 mW 1.0 dB at PRlevel of 0 dBm 1.0 d
28、B at PR2level of -2 dBm Negative See footnotes at end of table. MIL-DTL-28837/1D9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Physical and environmental characteristics - Continued. 1/ Dash no. Operating frequency range (MHz) LO input dri
29、ve power in dBm 2/ Maximum conversion loss (SSB) dB MHz Noise figure (SSB) dB MHz Isolation Minimum Frequency MHz LO-RF LO-IF RF-IF dB dB dB 04N 04S LO 2-500 RF 2-400 IF DC-800 minimum +10 TV +20 maximum +23 fL5-200 fR20-80 6.5 at fI5-80 7.0 at fI.4-120 3/ fL5-200 fR20-80 6.5 at fI5-80 7.0 at fIDC-1
30、20 40 35 25 N/A 40 35 25 N/A N/A N/A N/A 17 2-32 32-100 100-500 2-400 fL5-300 fR5-300 7.0 at fI5-80 8.0 at fIDC-300 3/ fL5-300 fR5-300 7.0 at fI5-80 8.0 at fI2-120 fL5-470 fR5-400 7.5 at fI5-80 3/ fL5-470 fR5-400 8.0 at fI5-80 fL2-500 fR2-400 9.0 at fIDC-800 3/ fL2-500 fR2-400 9.5 at fI5-800 05N 05S
31、 LO .05-200 RF .05-200 IF DC-200 minimum +7 TV +13 maximum +17 7.5 at fLand fR0.2-50 fIDC-50 7.5 at fLand fR1-50 fI0.4-50 45 30 N/A 40 25 N/A N/A N/A 24 .05-30 30-200 .05-3 9.0 at fLand fR.05-200 fIDC-200 9.0 at fLand fR50-200 fI0.4-200 06N 06S LO .5-500 RF .5-500 IF DC-500 minimum +7 TV +17 maximum
32、 +20 7.0 at fLand fR0.5-30 fIDC-30 7.5 at fLand fR30-100 fIDC-100 9.0 at fLand fR100-500 fIDC-500 7.0 at fLand fR1-30 fI0.4-30 7.5 at fLand fR30-100 fI0.4-100 9.0 at fLand fR100-500 fI0.4-500 55 45 35 N/A 45 35 25 N/A N/A N/A N/A 20 0.5-30 30-100 100-500 0.5-500 See footnotes at end of table. 10MIL-
33、DTL-28837/1DProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics - Continued. 1/ Dash no. RF and LO 4/ maximum power input (rms) Conversion compression (maximum) Desensitization (maximum) Relative dc polarity 5/ VSWR (m
34、aximum) Third order, two tone intermodulation LO IF RF dBm Frequencies 04N 04S 200 mW 1.0 dB at PR+15 dBm PL+23 dBm 1.0 dB at PR2 +13 dBm PL+23 dBm Positive 05N 05S 70 mW 1.0 dB at PR+10 dBm PL+17 dBm 1.0 dB at PR2 +7 dBm PL+17 dBm Negative 06N 06S 140 mW 1.0 dB at PR+8 dBm PL+17 dBm 1.0 dB at PR2 +
35、7 dBm PL+17 dBm Negative See footnotes at end of table. 11MIL-DTL-28837/1DProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Physical and environmental characteristics - Continued. 1/ Dash no. Operating frequency range (MHz) LO input drive powe
36、r in dBm 2/ Maximum conversion loss (SSB) dB MHz Noise figure (SSB) dB MHz Isolation Minimum Frequency MHz LO-RF LO-IF RF-IF dB dB dB 07N 07S LO 5-400 RF 5-400 IF DC-400 TV +17 7.5 at fL and fR5-200 fIDC-200 N/A 35 25 30 20 N/A N/A 5-100 100-400 9.0 at fL and fR200-400 fIDC-400 08N 08S LO 0.5-500 RF
37、 0.5-500 IF DC-500 TV +17 7.5 at fLand fR0.5-5 N/A 45 30 25 35 30 20 N/A N/A N/A 0.5-5 5-250 250-500 8.5 at fLand fR5-500 fIDC-500 09N 09S LO 1-750 RF 1-750 IF DC-750 TV +7 7.5 at fLand fR2-375 fIDC-375 N/A 45 30 25 30 25 20 N/A N/A N/A 1-2 2-375 375-750 8.5 at fLand fR1-750 fIDC-750 10N 10S LO .4-5
38、00 RF .4-500 IF DC-500 minimum +7 TV +13 maximum +17 7.5 at fLand fR1-50 fI0.4-50 7.5 at fLand fR1-50 fI0.4-50 45 25 40 25 N/A N/A 0.4-50 50-500 9.0 at fLand fR0.4-500 fI0.4-500 9.0 at fLand fR50-500 fI0.4-500 See footnotes at end of table. 12MIL-DTL-28837/1DProvided by IHSNot for ResaleNo reproduct
39、ion or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics - Continued. 1/ Dash no. RF and LO 4/ maximum power input (rms) Conversion compression (maximum) Desensitization (maximum) Relative dc polarity 5/ VSWR (maximum) Third order, two tone intermodulation LO IF R
40、F dBm Frequencies 07N 07S 35 mW N/A N/A Negative 08N 08S 350 mW 1.0 dB at PR+10 dBm N/A Negative 09N 09S 350 mW 1.0 dB at PR+0 dBm 1.0 dB at PR2 -2 dBm Negative 10N 10S 70 mW 1.0 dB at PR+10 dBm PL+17 dBm 1.0 dB at PR2 +7 dBm PL+17 dBm Negative See footnotes at end of table. 13MIL-DTL-28837/1DProvid
41、ed by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Physical and environmental characteristics - Continued. 1/ Dash no. Operating frequency range (MHz) LO input drive power in dBm 2/ Maximum conversion loss (SSB) dB MHz Noise figure (SSB) dB MHz Isola
42、tion Minimum Frequency MHz LO-RF LO-IF RF-IF dB dB dB 11N 11S LO 1-500 RF 1-500 IF DC-500 TV +23 8.5 at fL and fR2-400 fIDC-400 Within 1 dB of conversion loss 50 40 30 20 40 30 20 20 25 20 20 20 1-100 100-200 200-300 300-500 9.5 at fL and fR1-500 fIDC-500 12N 12S LO .002-12 RF .002-12 IF DC-12 minim
43、um +4 TV +7 maximum +13 6.0 at fLand fR.01-5 fI0.4-5 6.0 at fLand fR.01-5 fI0.4-5 45 40 N/A .002-5 5-12 8.0 at fLand fR.002-12 fI0.4-12 8.0 at fLand fR5-12 fI0.4-12 40 30 N/A 13N 13S LO .05-200 RF .05-200 IF DC-200 minimum -2 TV 0.0 maximum +13 6.5 at fLand fR0.2-50 fIDC-50 6.5 at fLand fR0.2-50 fI0
44、.4-50 45 40 N/A .05-30 8.0 at fLand fR50-200 fIDC-200 8.0 at fLand fR50-200 fI0.4-200 35 30 N/A 30-200 8.5 at fLand fR0.05-0.2 fIDC-0.2 See footnotes at end of table. 14MIL-DTL-28837/1DProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electric
45、al characteristics - Continued. 1/ Dash no. RF and LO 4/ maximum power input (rms) Conversion compression (maximum) Desensitization (maximum) Relative dc polarity 5/ VSWR (maximum) Third order, two tone intermodulation LO IF RF dBm Frequencies 11N 11S 425 mW 1.0 dB at PR+14 dBm PL+23 dBm 1.0 dB at P
46、R2 +12 dBm PL+23 dBm Negative 12N 12S 35 mW N/A N/A Negative 13N 13S 50 mW N/A N/A Negative 2.5:1 2.0:1 2.5:1 6/ +5 +3 fL0: 200 MHz fR1: 150 MHz fR2: 155 MHz at -10 dBm -15 dBm See footnotes at end of table. 15MIL-DTL-28837/1DProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Physical and environmental characteristics - Continued. 1/ Dash no. Operating frequency range (MHz) LO input drive power in dBm 2/ Maximum conversion loss (SSB) dB MHz Noise figure (SSB) dB MHz Isolation Minimum Frequency MHz LO-RF LO-IF RF-IF dB dB dB 1
