1、AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, RECEPTACLE, CABLE CONNECTING, CLASSES D, DS, P, T, TS, Z, AND ZS This specification is approved for use by all Departments and Agencies of the Department of D
2、efense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-28840. Inches mm .010 .016 .100 .130 .878 .898 2.062 0.25 0.41 2.54 3.30 22.30 22.81 52.37 FIGURE 1. Dimensions and configuration. MIL-DTL-28840/11D 14 November 2013 SUPERSEDING
3、MIL-DTL-28840/11C 23 October 2009 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/11D 2 Shell size designator (see note 1) N dia max R S A (11) .750 (19.05) .768 (19.51) .758 (19.25) .963 (24.46) .943 (23.95) B (13) .875 (22.
4、22) .893 (22.68) .883 (22.43) 1.088 (27.63) 1.063 (27.00) C (15) 1.062 (26.97) 1.080 (27.43) 1.070 (27.18) 1.275 (32.38) 1.255 (31.88) D (17) 1.125 (28.58) 1.143 (29.03) 1.133 (28.78) 1.338 (33.98) 1.318 (33.48) E (19) 1.312 (33.32) 1.330 (33.78) 1.320 (33.53) 1.525 (38.74) 1.505 (38.23) F (23) 1.50
5、0 (38.10) 1.518 (38.56) 1.508 (38.30) 1.713 (43.51) 1.693 (43.00) G (25) 1.625 (41.28) 1.643 (41.73) 1.633 (41.48) 1.838 (46.69) 1.818 (46.18) H (29) 1.812 (46.02) 1.893 (48.08) 1.883 (47.83) 2.088 (53.04) 2.068 (52.53) J (33) 2.000 (50.80) 2.080 (52.83) 2.070 (52.58) 2.275 (57.78) 2.255 (57.28) NOT
6、ES: 1. Shell sizes are provided within parentheses for information and are not a part of the designator. 2. Dimensions are in inches. 3. Metric equivalents are given for information only. 4. Dimensions apply after plating. 5. Designator of backshell size within each shell size. FIGURE 1. Dimensions
7、and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/11D 3 REQUIREMENTS: Dimensions and configurations: See figure 1. Classes: D, DS, P, T, TS, Z and ZS. Insert arrangements: See the figure of MIL-STD-1698 corres
8、ponding to the desired shell size. Contacts: Pin or socket, crimp type, styles P, S, D, E, F or G, in accordance with MIL-DTL-28840. Shell polarization: 1 thru 6, key position. Marking: Part or Identifying Number (PIN) on shell. Mating counterpart: Plug connectors specified in MIL-DTL-28840/16, /17,
9、 /18, /19, /26, /28, and /29. Installation and removal tools: As specified in MIL-I-81969/33 and /34. A backshell shall be used to meet moisture and water pressure requirements. PIN example: M28840/11 A G 1 P 1 Specification sheet number Key position 1, 2, 3, 4, 5, 6 position Contact designator Shel
10、l size Insert designator Restrictions: Classes D and DS are inactive for NAVSEA new design, unless approved by NAVSEA. Classes Code letter D A DS B P F T L TS N Z S ZS R Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/11D 4 Changes from
11、 previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are c
12、autioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Referenced documents. In addition to MIL-DTL-28840, this document references the following: MIL-DTL-28840/16 MIL-DTL-28840/17 MIL-DTL
13、28840/18 MIL-DTL-28840/19 MIL-DTL-28840/26 MIL-DTL-28840/28 MIL-DTL-28840/29 MIL-I-81969/33 MIL-I-81969/34 MIL-STD-1698 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - EC Air Force - 85 DLA - CC (Project 5935-2013-109) Review activities: Army AV, MI Air Force 99 NOTE:
14、The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
