1、AMSC N/A FSC 5910 MIL-PRF-20/38C 21 April 2011 SUPERSEDING MIL-PRF-20/38B 21 June 2001 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, STYLES CCR08 AND CC08 This specification is approved for use by all De
2、partments and Agencies of the Department of Defense. The requirements for acquiring the capacitors described herein shall consist of this specification sheet and MIL-PRF-20. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Lead diameter shall be .025 +.004
3、 -.001 (0.64 +0.10, -0.03 mm). FIGURE 1. Styles CCR07 and CC07 capacitors. INCH-POUND Style CC08 is inactive for new design after 21 April 2011. Use CCR08. Inches mm .001 .03 .004 .10 .010 .25 .020 .51 .025 .64 .030 .76 .240 6.10 .400 10.16 .480 12.19 1.250 31.75 Provided by IHSNot for ResaleNo rep
4、roduction or networking permitted without license from IHS-,-,-MIL-PRF-20/38C 2 REQUIREMENTS: Dimensions and configuration: See figure 1. Lead type: Radial. Case type: Molded. DC rated voltage: See table I. Operating temperature range: -55C to +125C. Characteristic: CG. Failure rate level (CCR08 onl
5、y): M (1.0 percent), P (0.1 percent), R (.01 percent) or S (.001 percent). Thermal shock and voltage conditioning (CCR08 only): In accordance with MIL-PRF-20. Capacitance: Within tolerance specified (see table I). Dissipation factor: In accordance with MIL-PRF-20. Dielectric withstanding voltage: In
6、 accordance with MIL-PRF-20. Body insulation: Test II. TABLE I. Capacitor characteristics. PIN 1/ Rated voltage (volts, dc) Nominal capacitance (pF) Capacitance tolerance PIN 1/ Rated voltage (volts, dc) Nominal capacitance (pF) Capacitance tolerance CC-08CG392- CC-08CG472- CC-08CG153- 200 200 100 3
7、900 4,700 15,000 GJK GJK GJK CC-08CG183- CC-08CG563- CC-08CG683- 100 50 50 18,000 56,000 68,000 GJK GJK GJK 1/ Complete PIN will include the following: 1st dash - Symbol “R” (for style CCR08) or dash will be deleted (for style CC08). 2nd dash - Applicable capacitance tolerance symbol. 3rd dash - Ap
8、plicable failure rate level symbol (CCR08 only) or dash will be deleted (for style CC08). Solderability: In accordance with MIL-PRF-20. Resistance to soldering heat: In accordance with MIL-PRF-20. Life: In accordance with MIL-PRF-20, operating condition 2. Part or Identifying Number (PIN): In accord
9、ance with MIL-PRF-20 and table I. Marking: In accordance with MIL-PRF-20. Changes from previous issue: The margins of this specification sheet are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no
10、 liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Provided by IHSNot for ResaleNo reproduct
11、ion or networking permitted without license from IHS-,-,-MIL-PRF-20/38C 3 Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5910-2011-019) DLA - CC Review activities: Navy - AS, MC, OS, SH Air Force 99 NOTE: The activities listed above were interested in this docum
12、ent as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
