1、INCH-POUND MS9447 AMENDMENT 1 8 July 2003 MILITARY STANDARD BOLT, MACHINE-STEEL AMS 6304, DIFFUSED NICKEL-CADMIUM, PLATED, HEXAGON HEAD, DRILLED, .625-18 UNJF-3A This amendment forms a part of MS9447, dated 21 December 1962, and is approved for use by all Departments and Agencies of the Department o
2、f Defense. PAGE 1 In drawing: Replace front view with this drawing and add view A: Add the word “NOTES:” above note 1. Note 8: Delete “AMS 7455” and substitute “AS7455”. Note 9: Delete “AS291” and substitute “ASME B46.1”. Add new note: “14. BEARING SURFACE: BEARING SURFACE SHALL BE FLAT AND WASHER F
3、ACED. DIAMETER OF BEARING SURFACE SHALL BE EQUAL TO THE MAXIMUM WIDTH ACROSS FLATS WITHIN A TOLERANCE OF MINUS 10% IN ACCORDANCE WITH ASME B18.2.1” Custodians: Preparing Activity: Navy -AS DLA-IS DLA-IS (Project 5306-2715 AMSC N/A FSC 5306 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
