DL T 1397 1-2014 General specification for DC power system test equipments of electric power system Part 1 Battery voltage inspection apparatus《电力直流电源系统用测试设备通用技术条件 第1部分 蓄电池电压巡检仪》.pdf

相关资源

DL T 880-2021 带电作业用导线软质遮蔽罩.pdf

DL T 887-2024 杆塔工频接地电阻测量方法.pdf

DL T 939-2024 火力发电厂锅炉受热面管监督技术标准.pdf

DL T 647-2024 电站锅炉压力容器检验规程.pdf

DL T 822-2024 水电厂计算机监控系统试验验收规程.pdf

DL T 838-2024 燃煤火力发电企业设备检修导则.pdf

DL T 849.4-2024 电力设备专用测试仪器通用技术条件 第4部分：超低频高压发生器.pdf

DL T 683-2024 电力金具型号命名方法.pdf

DL T 824-2023 汽轮机电液调节系统性能验收导则.pdf

DL T 895-2024 除灰除渣系统运行导则.pdf

猜你喜欢

BS EN 15413-2011 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample《固体回收燃料 利用实验室样品制备试验样品的方法》.pdf

BS EN 15414-3-2011 Solid recovered fuels Determination of moisture content using the oven dry method Moisture in general analysis sample《固体再生燃料 烘炉法测定含水量 一般分析样的水分》.pdf

BS EN 15415-1-2011 Solid recovered fuels Determination of particle size distribution Screen method for small dimension particles《固体回收燃料 粒度分布测定 小尺寸颗粒筛选法》.pdf

BS EN 15415-2-2012 Solid recovered fuels Determination of particle size distribution Maximum projected length method (manual) for large dimension particles《固体再生燃料 粒度分布测定 最大化投影长度方法(.pdf

BS EN 15415-3-2012 Solid recovered fuels Determination of particle size distribution Method by image analysis for large dimension particles《固体再生燃料 粒度分布测定 大尺寸颗粒度图像分析法》.pdf

BS EN 15416-1-2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Long-term tension load test perpendicular to the bond line at varyl.pdf

BS EN 15416-3-2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Creep deformation test at cyclic climate conditions with specimens.pdf

BS EN 15416-4-2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Determination of open assembly time under referenced conditions《苯酚.pdf

BS EN 15416-5-2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic Test methods Determination of minimum pressing time under referenced conditions.pdf