1、 DETAIL SPECIFICATION SHEET CONNECTORS, LINE PLUG, ELECTRICAL, SOLDER TYPE, BAYONET COUPLING, CLASS T, SERIES I This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this speci
2、fication sheet and MIL-DTL-27599. FIGURE 1. Line plug. AMSC N/A FSC 5935 INCH - POUNDMS20027F 31 August 2010 SUPERSEDING MS20027E 20 May 2005 Inactive for new design after 7 December 1998. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20027F 2 FI
3、GURE 1. Line plug - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20027F 3 FIGURE 1. Line plug - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20027F 4 NOTES: 1. Normal k
4、eyway position. For other keyway positions, see MIL-DTL-27599. 2. Diameters A, D and Q shall be concentric within .015 T.I.R. 3. Diameters D and I shall be concentric within .005 T.I.R. at MMC. 4. Diameter A with respect to diameter B, and diameter D with respect to diameter N, shall be concentric a
5、t MMC. 5. Dimensions are in inches. Metric equivalents are given for information only. 6. Insert front surface shall be flat within .005 T.I.R. 7. The point at which a gauge pin having the same basic diameter as the mating contact and a square face, touches socket contact spring. 8. The gauge featur
6、es for GG shall be CC smaller than their MMC size. FIGURE 1. Line plug - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20027F 5 Inches mm Inches mm Inches mm Inches mm 0.001 0.0254 0.012 0.305 0.063 1.60 0.39 9.91 0.004 0.102 0.02 0.50
7、8 0.116 2.95 0.565 14.35 0.005 0.127 0.036 0.91 0.126 3.20 1.172 29.78 0.01 0.254 0.062 1.575 0.011 0.28 FIGURE 1. Line plug - Continued. TABLE I. Dimensions. 1/ 2/ Shell size A dia + .001 - .005 B dia + .000 - .016 D dia + .005 - .001 I dia .005 J .005 pin insert J1 .005 socket insert 9 .572 (14.53
8、) .662 (16.81) .442 (11.23) .296 (7.52) .576 (14.63) .020 (.51) 11 .700 (17.78) .810 (20.57) .570 (14.48) .413 (10.49) 13 .850 (21.60) .960 (24.38) .687 (17.45) .527 (13.38) 15 .975 (24.76) 1.085 (27.56) .812 (20.62) .652 (16.56) 17 1.100 (27.94) 1.210 (30.73) .937 (23.80) .777 (19.73) 19 1.207 (30.
9、66) 1.317 (33.45) 1.042 (26.46) .866 (22.00) 21 1.332 (33.83) 1.442 (36.63) 1.167 (29.64) .991 (25.17) 23 1.457 (37.00) 1.567 (39.80) 1.292 (32.82) 1.116 (28.34) 25 1.582 (40.20) 1.692 (42.97) 1.417 (36.00) 1.241 (31.52) See notes at end of table. Provided by IHSNot for ResaleNo reproduction or netw
10、orking permitted without license from IHS-,-,-MS20027F 6 TABLE I. Dimensions - Continued. 1/ 2/ Shell size K + .015 - .000 L max M + .000 - .005 N dia + .005 - .006 Q dia max S dia .020 9 .085 (2.16) 1.094 (27.78) .632 (16.05) .492 (12.49) 1.094 (27.79) .938 (23.82) 11 .620 (15.75) 1.188 (30.17) 1.0
11、31 (26.18) 13 .769 (19.53) 1.281 (32.54) 1.125 (28.57) 15 .894 (22.70) 1.375 (34.92) 1.219 (30.96) 17 1.019 (25.88) 1.469 (37.31) 1.312 (33.32) 19 1.124 (28.55) 1.594 (40.48) 1.438 (36.52) 21 .115 (2.92) .602 (15.30) 1.249 (31.72) 1.719 (43.66) 1.562 (39.67) 23 1.374 (34.90) 1.844 (46.84) 1.688 (42.
12、87) 25 1.499 (38.07) 1.969 (50.01) 1.812 (46.02) See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20027F 7 TABLE I. Dimensions - Continued. 1/ 2/ Shell size T dia + .006 - .002 W min full thread Z BSC V thread class 2A pla
13、ted UNEF CC 9 .078 (1.98) .250 (6.35) .100 (2.54) 7/16 - 28 .010 (.254) 11 9/16 - 24 13 11/16 - 24 15 13/16 - 20 17 15/16 - 20 19 1 1/16 - 18 21 1 3/16 - 18 23 1 5/16 - 18 25 .125 (3.17) .109 (2.77) 1 7/16 - 18 1/ Dimensions are in inches. 2/ Metric equivalents are given for information only. REQUIR
14、EMENTS Dimensions and configurations: See figure 1 and table I. This connector mates with MS20026 and MS20029. Insert arrangement shall be in accordance with MIL-STD-1560. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS20027F 8 Part or Identifying
15、 Number (PIN) example: MS20027 T 21 A 41 P A MS number Class Shell size Finish (color) Insert arrangement Style Polarizing position (No letter is required for normal position) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previo
16、us issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-27599, this document references the following: MIL-STD-1560 MS20026 MS20029 CONCLUDING MATERIAL Custodians: Preparing activity: Air Force - 85 DLA - CC DLA - CC Review activity: Air Force - 99 (Project 5935-2010-
17、144) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
