1、 AMSC N/A 1 of 5 FSC 5945 DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited. INCH-POUND MS24183L 15 April 2003 SUPERSEDING MS24183K 10 Nov 1993 DETAIL SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, 200 AMPERES, 1 PST (N.O.), TYPE I, HERMETICALLY SEALED This specification
2、 is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the relay described herein shall consist of this specification and the latest issue of MIL-PRF-6106. FIGURE 1. Dimensions and configurations.Provided by IHSNot for ResaleNo reproduction
3、or networking permitted without license from IHS-,-,-MS24183L 2 Inches mm Inches mm .010 0.25 .969 24.56 .031 0.79 1.375 34.93 .063 1.60 1.500 38.10 .095 2.41 1.844 46.84 .193 4.90 2.065 52.45 .266 6.76 2.647 67.25 .312 7.92 2.957 75.11 .320 8.13 3.000 76.20 .453 11.51 3.282 83.36 .750 19.05 3.672 9
4、3.27 .844 21.44 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerance is .031. 4. Referenced Government documents of the issue listed in that issue of the Department of Defense Index of Specifications and Standards
5、(DoDISS) specified in the solicitation form a part of this standard to the extent specified herein. 5. Coil and auxiliary terminals may use an additional flat washer for terminal seat. 6. Cadmium or cadmium compounds are prohibited on external hardware. A transition period to non-cadmium hardware is
6、 authorized for up to 1 year from the date of this revision. 7. Spring washer on drawing is a spring lock washer. FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24183L 3 REQUIREMENTS: Dimensions
7、 and configurations: See figure 1. PINs and general characteristics: See table I. Contact data: Load ratings: See table II. Maximum contact drop: Initial: 0.150 volt. After life test: 0.175 volt. Overload current (NO): 1,600 amperes. Rupture current (NO): 2,000 amperes. Coil data: See table III. Dut
8、y rating: Continuous. Electrical data: Minimum insulation resistance: Initial: 100 megohms. After life or environmental test: 50 megohms. Dielectric strength: Sea level, 2-5 seconds: Initial After life tests 28 V dc 115 V ac 28 V dc 115 V ac Coil to case 1,250 V rms 1,500 V rms 1,000 V rms 1,125 All
9、 other points 1,250 V rms 1,500 V rms 1,000 V rms 1,125 Dielectric strength (altitude): 1 minute. 28 V dc 115 V ac Coil to case 500 V rms 500 V rms All other points 500 V rms 500 V rms Environmental characteristics: Temperature range: -70C to + 71C. Max altitude rating: 80,000 feet. Shock, g-level:
10、25 gs. Duration: 6-9 ms. Maximum duration contact opening: 2 ms. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24183L 4 Vibration, (sinusoidal): See table IV. Vibration (random) and high shock: Not applicable. Acceleration: 15 gs. TABLE I. PINs a
11、nd general characteristics. 1/ PIN MS24183- Type Coil Terminal type Mounting or mating socket Auxiliary contacts Maximum weight (pounds) 2/ D1 I dc Stud Flange None 1.7 1/ A1 and A2 have been canceled without replacement. D2 has been superseded by MS24142-D2. 2/ Weights include covers and barriers.
12、TABLE II. Rated contact load (amperes per pole) case grounded. 1/ 28 V dc 115 V ac, 1 phase 115/200 V ac, 3 phase 2/ Main Aux Main Aux Main Aux Type of load Life operating cycles x 103NO NC NO NC 400 Hz 60 Hz 400 Hz 60 Hz 400 Hz 60 Hz 400 Hz 60 Hz Resistive 50 200 200 Inductive 10 100 Motor 50 200 1
13、50 Mechanical life reduced current 100 50 50 Mixed loads 50 20 Applicable per MIL-PRF-6106 10 1/ Absence of value indicates parameter is not applicable to this specification. 2/ Absence of value indicates relay is not rated for three phase application. TABLE III. Operating characteristics. Coil data
14、 Time - milliseconds max 1/ Rated Max Max pick-up voltage Contact Bounce 5/ Main Aux 5/ PIN MS 24183- Coil Volts 2/ Freq Hz Res +15% -10 Volts Amp Nor- mal 1/ High temptest Cont cur-rent test Hold vol-tage 1/ Drop out vol-tage 1/ Oper-ate 3/ Rel-ease 4/ NO NC NO NC D1 X1,X2 28 dc 64.5 29 .55 18 21 2
15、2.5 7.0 1.0 30 10 4.0 - - - 1/ Over the temperature range. 2/ CAUTION: Use of any coil voltage less than rated coil voltage will compromise the operation of the relay. 3/ With rated coil voltage 4/ From rated coil voltage. 5/ Absence of value indicates parameter is not applicable to this specificati
16、on. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24183L 5 TABLE IV. Vibration levels. Part number MS24183- 5-10 Hz 10-55 Hz 55-250 Hz 250-500 Hz 500-1,500 Hz D1 .08 DA .06 DA 8 gs 8 gs 5 gs Qualification by similarity: See MIL-PRF-6106. Part or
17、Identifying Number (PIN): MS24183-D1. For government logistical purposes, use MS24183-D1 in lieu of the MS25033-1. Custodians: Preparing activity:Navy - AS DLA - CC Air Force - 11 DLA - CC (Project 5945-1206-16) Review activities: Navy - EC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
