1、AMSC N/A FSC 5930 INCH-POUND MS24456E 21 December 2005 SUPERSEDING MS24456D 11 October 1968 DETAIL SPECIFICATION SHEET SWITCH, SENSITIVE, SEALED, SPDT, CLASS A5 OR B8 This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete requirements for ac
2、quiring the switch described herein shall consist of this specification and the latest issue of MIL-PRF-8805. FIGURE 1. Dimensions and configuration. SAE-AS4862 3 REQUIRED Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24456E 2 FIGURE 1. Dimension
3、s and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24456E 3 TABLE I. Detail requirements. Current Capacity (Amperes) 28 Volts DC 115 Volts 400 Cycles AC Dash No. Class Resistive Inductive Lamp Resistive Inductive Lamp
4、Ambient Temp Range C Insulation (Sea Level Only) Volts RMS -1 A5 -55 to +71 1000 -2 -3 B8 10 5 3 10 5 3 -70 to +120 1250 Referenced Documents MIL- PRF-8805 SAE-AS4862 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the chan
5、ges. Custodians: Preparing activity: Army - MI DLA - CC DLA - CC (Project 5930-2006-007) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
