1、AMSC N/A FSC 5930 INCH-POUND MS24658G 18 April 2011 SUPERSEDING MS24658F 28 September 1987 DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete require
2、ments for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-3950. FIGURE1. Dimensions and configuration Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24658G 2 NOTES: 1. Dimensions are inches
3、. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerance is .020 (0.51 mm) for two place decimals and .005 (0.13 mm) for three place decimals. 4. For hardware and terminal screw detail specifications, see appendix of MIL-DTL-3950. 5. In event of a conf
4、lict between the text of this standard and the reference cited herein, the text of this standard shall take precedence. FIGURE1. Dimensions and configuration - Continued REQUIREMENTS Locking arrangement Positive locking shall be accomplished and shall prevent motion of the toggle lever until the loc
5、king mechanism is manually released. The force required to release the locking mechanism shall be 3 to 5 pounds. The locking means at the top of the toggle bushing shall be capable of withstanding a torque of 20 inch-pounds applied in both directions immediately following the humidity test. Part num
6、ber example MS24658-21A (locking combination A). All switches on this standard are designed so that the movement of the switch mechanism is opposite to that of the toggle lever Maximum weight is .10 pound. Electrical rating: See table I. Inches mm Inches mm .005 0.13 .42 10.7 .008 0.20 .432 10.97 .0
7、12 0.30 .47 11.9 .020 0.51 .635 16.13 .060 1.52 1.05 26.67 .076 1.93 1.140 28.96 .25 6.49 1.180 29.97 .38 9.65 1.270 32.26 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24658G 3 Figure 2. Locking Combinations. Provided by IHSNot for ResaleNo repr
8、oduction or networking permitted without license from IHS-,-,-MS24658G 4 TABLE I. Detail Requirements. MS part No. Available locking combinations Circuit with Toggle Lever In Current capacity (amperes) 28 volts DC Current capacity(amperes) 115 volts, 60 and 400 Hertz AC Keying side Center Opposite k
9、eying side Lamp-Load circuit Resistive circuit Inductive circuit Lamp-Load circuit Resistive circuit Inductive circuit MS24658-21 All 1-2 On Off 2-3 On 5 20 15 3 15 10 MS24658-22 D,F,G Off None 2-3 On MS24658-23 D,F,G 1-2 On None 2-3 On MS24658-24 E,F,K,M None Off 2-3 On MS24658-25 F None Mom. Off 2
10、-3 On 4 15 10 2 15 7 MS24658-26 F 1-2 Mom On None 2-3 On MS24658-27 E,L,N 1-2 Mom On Off 2-3 Mom. on MS24658-28 E 1-2 Mom On Off None MS24658-29 F Mom. Off None 2-3 On MS24658-30 F 1-2 Mom On None Off MS24658-31 E,F,K,L,M,N 1-2 Mom On Off 2-3 On MS24658-32 E None On 1-2 2-3 Mom. On MS24658-33 E,F,K,
11、M None On 1-2 2-3 On 5 20 15 3 15 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24658G 5 Referenced documents MIL-DTL-3950 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the exten
12、t of the changes. Custodians: Preparing activity Army CR DLA CC Navy AS Air Force 85 (Project 5930-2011-047) DLA CC Review activities Army AR, AT, AV, MI Navy EC, MC Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
