1、AMSC N/A FSC 5985 MS25051A 14 July 2009 SUPERSEDING MS25051 (ASG) 18 August 1955 DETAIL SPECIFICATION SHEET INSERT, DEAD-END, ANTENNA This specification is approved for use by all Depart- ments and Agencies of the Department of Defense. The requirements for acquiring the switch described herein shal
2、l consist of this specification sheet and MIL-DTL-7965. NOTES: 1. Material: Body and cap, suitable for the purpose. Seal, Silicone rubber, suitable for the purpose. 2. Dimensions are in inches. 3. Tolerances: Two-place decimals .01, three-place decimals .005. 4. Threads shall conform to specificatio
3、n MIL-S-7742. 5. Maximum weight 0.07 pound. INCH-POUND Inactive for new design after 4 June 1999 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS25051A 2MS part number FIIN MS25051-1 Ltr Dimensions Ltr Dimensions B 2.1 Max H .191 C .06 I .19 D .06
4、J .06 E .187 +.005 - .000 K .06 F .62 L .620 G .05 .02 M .313 FIGURE 1. Dimensions and configuration Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS25051A 3Referenced documents. In addition to MIL-DTL-7965, this document references the following:
5、MIL-S-7742 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity Navy AS DLA -CC Air Force 85 DLA CC (Project 5985-2009-021) NOTE: The activities listed above were interested in this do
6、cument as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
