DLA MS27152 REV C-2011 SWITCH PRESSURE-WARNING LOW AIR PRESSURE 60 PSI SPST WATERPROOF.pdf

上传人:progressking105 文档编号:696656 上传时间:2019-01-02 格式:PDF 页数:2 大小:37.88KB
下载 相关 举报
DLA MS27152 REV C-2011 SWITCH PRESSURE-WARNING LOW AIR PRESSURE 60 PSI SPST WATERPROOF.pdf_第1页
第1页 / 共2页
DLA MS27152 REV C-2011 SWITCH PRESSURE-WARNING LOW AIR PRESSURE 60 PSI SPST WATERPROOF.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、AMSC N/A FSC 5930 INCH-POUND MS27152C 10 March 2011 SUPERSEDING MS27152B 13 June 1968 DETAIL SPECIFICATION SHEET Inactive for new design after 9 June 2005 SWITCH, PRESSURE-WARNING, LOW AIR PRESSURE, 60 PSI, SPST, WATERPROOF This specification is approved for use by all Departments and Agencies of th

2、e Department of Defense. The complete requirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-12211. NOTES: 1. Dimensions are in inches. 2. Tolerances are 1/64 on fractions. 3. Threads shall be in accordance with screw thread standar

3、ds for federal services, handbook H28. 4. For design feature purposes, this standard takes precedence over procurement documents reference herein. 5. This standard is not intended to limit construction to features other than as shown hereon by dimensions, notations or referenced documents. 6. Markin

4、g shall consist of the MS part number and manufacturers identification in accordance with MIL-STD-130. FIGURE1. Dimensions and Configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27152C 2 REQUIREMENT Switch contacts shall close at 60 6 P

5、SI and remain closed on decreasing pressure. Switch contact rating at 24 Volts DC: resistance load 5 Amp. or lamp load 3 Amp, or inductive load 3 Amp. (L/R ratio .026). Type I (low pressure closes contacts) Grade A (waterproof) class 2 (low vibration) of procurement specification. With switch conduc

6、ting rated resistive load current, the terminal to terminal voltage drop shall not exceed 150 millivolts prior to the endurance test of the procurement specification and shall not exceed 300 millivolts after endurance test. Referenced documents MIL-DTL-12211 MIL-STD-130 MS33800 NBS HDBK H28 Marginal

7、 notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity Army AT DLA CC Air Force - 85 DLA CC (Project 5930-2011-032) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • ASTM E900-2015e1 1181 Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials《预测在反应堆容器材料中辐射感应变化导致温度漂移的标准指南》.pdf ASTM E900-2015e1 1181 Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials《预测在反应堆容器材料中辐射感应变化导致温度漂移的标准指南》.pdf
  • ASTM E903-2012 0571 Standard Test Method for Solar Absorptance Reflectance and Transmittance of Materials Using Integrating Spheres《用于完整球体材料的日光吸收比 反射比和透射比的标准试验方法》.pdf ASTM E903-2012 0571 Standard Test Method for Solar Absorptance Reflectance and Transmittance of Materials Using Integrating Spheres《用于完整球体材料的日光吸收比 反射比和透射比的标准试验方法》.pdf
  • ASTM E905-1987(2007) Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors《追踪强化太阳能收集器热性能的试验方法》.pdf ASTM E905-1987(2007) Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors《追踪强化太阳能收集器热性能的试验方法》.pdf
  • ASTM E905-1987(2013) 1783 Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors《测定跟踪聚光太阳能收集器热性能的标准试验方法》.pdf ASTM E905-1987(2013) 1783 Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors《测定跟踪聚光太阳能收集器热性能的标准试验方法》.pdf
  • ASTM E906 E906M-2010 0625 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《热电堆法测定材料和产品热量和可见烟发散度的标准试验方法》.pdf ASTM E906 E906M-2010 0625 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《热电堆法测定材料和产品热量和可见烟发散度的标准试验方法》.pdf
  • ASTM E906 E906M-2014 9129 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《采用热电堆法的材料与产品的热和可视烟雾释放率的标准试验方法》.pdf ASTM E906 E906M-2014 9129 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《采用热电堆法的材料与产品的热和可视烟雾释放率的标准试验方法》.pdf
  • ASTM E906 E906M-2017 0625 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《采用热电堆法的材料与产品热和可视烟雾释放率的标准试验方法》.pdf ASTM E906 E906M-2017 0625 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《采用热电堆法的材料与产品热和可视烟雾释放率的标准试验方法》.pdf
  • ASTM E906-2007 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《用热电堆法测量材料和产品的热和可见烟雾释放率用标准试验方法》.pdf ASTM E906-2007 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《用热电堆法测量材料和产品的热和可见烟雾释放率用标准试验方法》.pdf
  • ASTM E906-2007e1 895 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《用热电堆法测量材料和产品的热和可见烟雾释放率用标准试验方法》.pdf ASTM E906-2007e1 895 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method《用热电堆法测量材料和产品的热和可见烟雾释放率用标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1