1、 AMSC N/A FSC 5935 MS27271A 21 February 2013 SUPERSEDING MS27271 (USAF) 7 October 1963 DETAIL SPECIFICATION SHEET GROMMET, RUBBER - PLUG CONNECTOR, RAMP POWER, 416/240 VOLTS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acqu
2、iring the product described herein shall consist of this specification sheet and MIL-DTL-38159. Part or Identifying Number (PIN) Cable size A Max Min MS27271-1 2.13 (54.10) 1.93 (49.02) 2.19 (55.63) MS27271-2 1.94 (49.28) 1.75 (44.45) 2.00 (50.80) MS27271-3 1.75 (44.45) 1.56 (39.62) 1.81 (45.97) MS2
3、7271-4 1.56 (39.62) 1.38 (35.05) 1.63 (41.40) NOTES: 1. Material: In accordance with MIL-DTL-38159. 2. Remove all sharp edges. 3. Dimension are in inches, metric equivalents are given for information only. 4. Unless otherwise specified tolerance is .03 inches. FIGURE 1. Grommet, rubber plug connecto
4、r ramp power, 412/240 volts. 2.375 (60.33) 2.875 (73.03) A .25 (6.35) 3.375 (85.73) INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27271A 2 Changes from previous issues. Marginal notations are not used in this revision to identify chang
5、es with respect to the previous issue due to the extent of the changes. Referenced documents. This document references MIL-DTL-38159. CONCLUDING MATERIAL Custodians: Preparing activity: Air Force - 85 DLA - CC DLA - CC (Project 5935-2012-237) Review activities: Air Force 99 NOTE: The activities list
6、ed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
