1、MS27399A 22 March 2005 SUPERSEDING MS27399 (USAF) 15 June 1965 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRICAL, STYLE S, RACK AND PANEL, MINIATURE, CLOSED ENTRY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the pr
2、oduct described herein shall consist of this specification sheet and MIL-DTL-26518. The Qualified Products List (QPL) associated with this inactive for new design specification will be maintained until acquisition of the product is no longer required, where upon the specification and QPL will be can
3、celed. Style S (socket insert) Environment Resistant (R) Plugs FIGURE 1. Connector dimensions and configurations. AMSC N/A FSC 5935INCH-POUNDInactive for new design after 8 June 1999. For new design use MIL-DTL-83733. Provided by IHSNot for ResaleNo reproduction or networking permitted without licen
4、se from IHS-,-,-MS27399A 2 FIGURE 1. Connector dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27399A 3 Shell size D .005 E .004 F .005 G H .005 A 4.296 3.875 3.239 3.147 3.061 B 2.866 2.445 1.809 1.717 1.
5、631 C 2.421 2.000 1.380 1.288 1.202 Contact pocket dimensions Contact size Shielded 20 16 12 8 4 No. 1 No. 2 Dimension min max min max min max min max min max min max min max U .017 .020 .028 .031 .034 .038 .040 .044 .040 .044 .034 .038 .040 .044V .110 .113 .145 .148 .192 .196 .283 .287 .368 .372 .1
6、92 .196 .283 .287W .048 .062 .082 .086 .129 .133 .224 .228 .308 .312 .129 .133 .224 .228Inches mm Inches mm Inches mm Inches mm .017 .018 .019 .020 .022 .024 .025 .028 .031 .034 .035 .038 .040 .044 .048 .050 .062 .071 .075 .082 0.43 0.46 0.48 0.51 0.56 0.61 0.64 0.71 0.79 0.86 0.89 0.97 1.02 1.12 1.
7、22 1.27 1.57 1.80 1.91 2.08 .085 .086 .101 .109 .110 .113 .125 .129 .133 .145 .148 .161 .171 .192 .196 .201 .211 .224 .228 .251 2.16 2.18 2.57 2.77 2.79 2.87 3.18 3.28 3.38 3.68 3.76 4.09 4.34 4.88 4.99 5.11 5.36 5.69 5.79 6.38 .259 .260 .280 .283 .285 .287 .308 .312 .318 .368 .372 .548 .558 .566 .6
8、50 .660 .684 .694 .775 .862 6.58 6.60 7.11 7.19 7.24 7.29 7.82 7.92 8.08 9.35 9.45 13.92 14.17 14.38 16.51 16.76 17.37 17.63 19.69 21.89 .872 .998 1.008 1.178 1.198 1.202 1.288 1.340 1.380 1.631 1.717 1.809 2.000 2.421 2.445 2.866 3.061 3.147 3.239 3.875 4.296 22.15 25.35 25.60 29.92 30.43 30.53 32.
9、72 34.04 35.05 41.43 43.61 45.95 50.80 61.49 62.10 72.80 77.75 79.93 82.27 98.43 109.12 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified tolerances are .003 inch (0.08 mm). 4. For insert arrangements see MS24288. 5. Distance betw
10、een end of shell and point at which a gage pin, having the same basic diameter as the mating contact and a square face, engages the socket contact spring. FIGURE 1. Connector dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without licen
11、se from IHS-,-,-MS27399A 4 Basic specification numberMS prefix Class, see MIL-DTL-26518 Shell size and insert designator (see figure 1 and MS24288) REQUIREMENTS: Dimensions and configuration: See figure 1. Materials shall be in accordance with MIL-DTL-26518. For mating and mounting details see MS242
12、87 and MS24288. Part or Identifying Number (PIN): See the following example: MS 27399 R A1 Referenced documents. In addition to MIL-DTL-26518, this document references the following: MS24287 MS24288 Changes from previous issue. Marginal notations are not used in this revision to identify changes wit
13、h respect to the previous issue due to the extent of the changes. CONCLUDING MATERIAL Custodians: Preparing activity: Air Force - 11 DLA - CC DLA - CC (Project 5935-4767-000) Reviewer: DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
