1、 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING FLANGE, SOLDER TYPE, HERMETIC SEAL, SERIES II This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist o
2、f this specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, class Y. AMSC N/A FSC 5935 MS27475G 13 April 2012 SUPERSEDING MS27475F 12 July 2002 INCH-POUND Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions. Provided by IHSNot for ResaleNo reproduction
3、 or networking permitted without license from IHS-,-,-MS27475G 2 Shell size LP max LS max Q max dia R BSC S max T +.010 -.005 V V Thread Class 2A UNEF 8 .250 .375 1.078 .297 .828 .120 .5625 24 10 1.256 .3595 .954 .6875 24 12 1.391 .406 1.047 .8125 20 14 1.516 .453 1.141 .9375 20 16 1.641 .4845 1.234
4、 1.0625 18 18 1.766 .531 1.328 1.1875 18 20 1.891 .578 1.453 1.3125 18 22 .375 .406 2.016 .625 1.578 1.4375 18 24 2.204 .6875 1.703 .147 1.5625 18 FIGURE 1. Receptacle, class Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27475G 3 Inc
5、hes mm Inches mm Inches mm Inches mm .005 0.13 .317 8.05 .754 19.15 1.312 33.32 .007 0.18 .344 8.74 .812 20.62 1.328 33.73 .008 0.20 .3595 9.13 .828 21.03 1.355 34.42 .010 0.25 .375 9.53 .879 22.33 1.391 35.33 .011 0.28 .405 10.24 .938 23.83 1.438 36.53 .012 0.30 .406 10.31 .954 24.23 1.453 36.91 .0
6、15 0.38 .438 11.13 .980 24.89 1.516 38.51 .028 0.71 .453 11.51 1.047 26.59 1.562 39.67 .058 1.47 .4845 12.31 1.062 26.97 1.578 40.08 .094 2.39 .515 13.08 1.078 27.38 1.641 41.68 .116 2.95 .531 13.49 1.105 28.07 1.703 43.26 .120 3.05 .562 14.27 1.141 28.98 1.766 44.86 .139 3.53 .578 14.68 1.188 30.18
7、 1.891 48.03 .147 3.73 .625 15.88 1.230 31.24 2.016 51.21 .223 5.66 .629 15.98 1.234 31.34 2.204 55.98 .250 6.35 .6875 17.46 1.266 32.16 .297 1.54 .688 17.48 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main keyway and keyway positions, see MIL-DTL
8、38999. 4. The gauge features for GG shall be .010 inch (0.25 mm) smaller than the MMC size at basic location. FIGURE 1. Receptacle, class Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27475G 4 REQUIREMENTS: Dimensions and configurat
9、ion: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This receptacle mates with MS27473, MS27480, MS27484 and MS27500. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27475 Y 24 D 61 P A MS number Class Shell size Finish Insert arrangement Contac
10、t style Polarizing positions (No letter is required for normal) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document re
11、ferences the following: MIL-STD-1560 MS27473 MS27480 MS27484 MS27500 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project: 5935-2012-035) DLA - CC Review activities: Army - MI Navy - EC, MC, OS Air Force - 19 DLA IS NOTE: The activities listed abov
12、e were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
