1、 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, SOLDER TYPE, HERMETIC SEAL, SERIES II This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of th
2、is specification sheet and MIL-DTL-38999. FIGURE 1. Receptacle, class Y. AMSC N/A FSC 5935 MS27477J 13 April 2012 SUPERSEDING MS27477H 12 July 2002 INCH-POUND Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions. Provided by IHSNot for ResaleNo reproduction or
3、networking permitted without license from IHS-,-,-MS27477J 2 FIGURE 1. Receptacle, class Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27477J 3 Shell size F .005 M Thread, class 2A (plated) O + .001 -.006 flat Q dia .016 S .016 8 .43
4、8 .875 20 UNEF .817 1.375 1.250 10 1.000 20 UNEF .941 1.500 1.375 12 1.125 18 UNEF 1.065 1.625 1.500 14 1.250 18 UNEF 1.190 1.750 1.625 16 1.375 18 UNEF 1.320 1.938 1.781 18 1.500 18 UNEF 1.440 2.016 1.890 20 .464 1.625 18 UNEF 1.565 2.141 2.016 22 1.750 18 UNS 1.690 2.265 2.140 24 1.875 16 UN 1.815
5、 2.390 2.265 Shell size UP max US max Z +.006 -.005 dia DD min dia EE +.005 -.000 Recommended Packing (O-ring) (see SAE-AS3578) (see note 7) 8 .281 .359 .965 .678 .140 AS3578-022 10 1.090 .780 AS3578024 12 1.215 .963 AS3578026 14 1.340 1.088 AS3578028 16 1.477 1.222 AS3578029 18 1.602 1.333 AS357803
6、0 20 .250 .344 1.727 1.458 .166 AS3578031 22 1.852 1.583 AS3578032 24 1.977 1.708 AS3578033 FIGURE 1. Receptacle, class Y Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27477J 4 Inches mm Inches mm Inches mm Inches mm .001 0.03 .250 6.3
7、5 1.190 30.23 1.727 43.87 .003 0.08 .281 7.13 1.215 30.86 1.750 44.45 .005 0.13 .312 7.92 1.222 31.04 1.781 45.24 .006 0.15 .344 8.74 1.250 31.75 1.815 46.10 .008 0.20 .359 9.12 1.320 33.53 1.852 47.04 .010 0.25 .438 11.13 1.333 33.86 1.875 47.63 .011 0.28 .464 11.79 1.340 34.04 1.890 48.00 .012 0.3
8、0 .678 17.22 1.375 34.95 1.938 49.23 .016 0.41 .780 19.81 1.440 36.58 1.977 50.22 .045 1.14 .817 20.75 1.458 37.03 2.016 51.21 .053 1.35 .875 22.23 1.477 37.52 2.140 54.36 .062 1.57 .941 23.90 1.500 38.10 2.141 54.38 .094 2.39 .963 24.46 1.565 39.75 2.265 57.53 .109 2.77 1.000 25.40 1.583 40.21 2.39
9、0 60.71 .116 2.95 1.065 27.05 1.602 40.69 .140 3.56 1.088 27.64 1.625 41.28 .166 4.22 1.090 17.69 1.690 42.93 .238 6.05 1.125 28.58 1.708 43.38 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Jam nut mounting receptacles shall be provided with an O-ring.
10、4. Sides of groove may have 5 maximum taper. 5. For main key polarization and key positions, see MIL-DTL-38999. 6. Diameters M, Q and Z shall be concentric within .015 inches (0.381 mm) T.I.R. 7. Recommended packing is for dimensions only, material is optional. FIGURE 1. Receptacle, class Y Continue
11、d. REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. This receptacle mates with MS27473, MS27480, MS27484 and MS27500. Insert arrangements: See MIL-STD-1560. Hex nuts: See MS3186. Provided by IHSNot for ResaleNo reproduction or networking
12、permitted without license from IHS-,-,-MS27477J 5 Part or Identifying Number (PIN) example: MS27477 Y 24 D 61 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions (No letter is required for normal) Changes from previous issue. Marginal notations are not used in
13、 this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS3186 MS27473 MS27480 MS27484 MS27500 SAE-AS3578 CONCLUDING MATERIAL Custodians: Preparin
14、g activity: Army CR DLA CC Navy AS Air Force - 85 (Project: 5935-2012-037) DLA CC Review activities: Army MI Navy EC, MC, OS Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
