1、MS28741K 15 January 2010 SUPERSEDING MS28741J 22 September 2000 DETAIL SPECIFICATION SHEET HOSE ASSEMBLY, DETACHABLE END FITTING, MEDIUM PRESSURE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described
2、herein shall consist of this specification sheet and MIL-DTL-8795. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Hose assembly lengths (L) shall be as specified with the following tolerances: a. Under 18 inches (0.46 m) long .125 inch (3.18 mm). b. Over
3、 18 to 36 inches (0.46 to 0.91 m) long .250 inch (6.35 mm). c. Over 36 to 50 inches long (0.91 to 1.27 m) .500 inch (12.70 mm). d. Over 50 inches long (tolerance 1.0%). FIGURE 1. Hose assembly dimensions and configuration. AMSC N/A FSC 4720INCH-POUND Provided by IHSNot for ResaleNo reproduction or n
4、etworking permitted without license from IHS-,-,-MS28741K 2 TABLE I. Hose assembly requirements. Dash size number Hose ID ref. inch (mm) Adapter PIN 1/ MS24587 -3 2/ .125 (3.18) -3 -4 .188 (4.78) -4 -5 .250 (6.35) -5 -6 .313 (7.95) -6 -8 .406 (10.31) -8 -10 .500 (12.70) -10 -12 .625 (15.88) -12 -16
5、.875 (22.23) -16 -20 1.125 (28.58) -20 -24 1.375 (34.93) -24 -32 1.813 (46.05) -32 1/ Part or Identifying Number (PIN). 2/ Assembly PIN MS28741-3 shall not be used for hydraulic applications. REQUIREMENTS: Hose assemblies shall be as specified on figure 1 and in table I. The hose assembly identifica
6、tion shall be marked in accordance with MIL-DTL-8795, identification of product, as specified in the requirements section. PIN example: MS28741 -8 -016 4 Example of a PIN: MS28741-8-0164. MS28741 hose assembly, .406 inch (10.31 mm) ID, length 16.500 inches. Changes from previous issue. Marginal nota
7、tions are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-8795, this document references MS24587. Specification number Dash size number (see table I) Length in inches (3 places) MS prefix
8、 Length in eighths of an inch (0 through 7) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS28741K 3 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - AS Air Force - 99 (Project 4720-2009-016) DLA - CC Review activities:
9、 Army - AV, MI Navy MC, SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
