1、INCH-POUND MS35123C 7 November 2005 SUPERSEDING MS35123B 31 October 1956 DETAIL SPECIFICATION SHEET RECEPTACLE, CONNECTOR (TYPE SM) UG-700/U Inactive for new design 15 June 1999 This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for a
2、cquiring the product described herein shall consist of this specification sheet and MIL-DTL-27434. Inches mm Inches mm .001 .03 .175 4.44 .003 .08 .208 5.28 .038 .96 .266 6.76 .040 1.02 .363 9.14 .063 1.60 .375 9.52 .124 3.15 .406 10.31 .132 3.35 .414 10.51 .140 3.56 .7.19 18.26 .152 3.86 FIGURE 1.
3、Type UG-700/U Connector. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS35123C 2NOTES: 1. Unless otherwise specified the tolerance shall be .003 (0.08 mm). 2. Metal stamp or etch characters to meet the requirements of MIL-STD-132
4、31. 3. All threads shall be in accordance with FED-STD-H28. 4. Dimensions are in inches. 5. Metric equivalents are given for information only. FIGURE 1. Type UG-700/U Connector - Continued. Dimensions and configuration: In accordance with Figure 1 and the following drawings: SC-B-72173 - Body, Brass
5、 SC-B-72196 - Clamp, Braid, Brass. SC-B-72197 - Nut, Clamp, Brass. SC-B-72199 - Insulator. SC-B-72200 - Contact, Brass. MS25082 - Nut, Hex, Brass. The insulator shall have no cracks or visible flaws. All metal parts shall be free from chips, burrs, and scratches in accordance with best commercial p
6、ractices. Frequency range: 500 MHz, maximum. Voltage rating: 100 volts, peak, maximum. Corrosion: Method 101 of MIL-STD-202 test condition B. Finish: All metal parts shall be silver plated to a minimum thickness of 0.0002 inches (0.005 mm) in accordance with ASTM B700. Part or Identifying Number (PI
7、N): MS35123-1. Referenced documents. In addition to MIL-DTL-27434, this document references the following: FED-STD-H28 MIL-STD-202 MIL-STD-13231 SC-B-72173 SC-B-72196 SC-B-72197 SC-B-72199 SC-B-72200 MS25082 ASTM B700 Provided by IHSNot for ResaleNo reproduction or networking permitted without licen
8、se from IHS-,-,-MS35123C 3CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC DLA - CC (Project 5935-4747-000) Review activity: Army - MI NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
