1、INCH-POUND MS51859C 31 October 2007SUPERSEDING MS51859B 11 February 2003 MILITARY SPECIFICATION SHEET WASHER, FLAT-PLASTIC (NYLON) Reactivated after 31 October 2007 and may be used for new and existing designs and acquisitions. This specification sheet is approved for use by all Departments and Agen
2、cies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and FF-W-92. BACTABLE I. Dash numbers and dimensionsDASH NOMINAL A B C THICKNESS NUMBER SIZE NOM MAX MIN NOM MAX MIN NOM MAX MIN -11 -12 -1 -13 -2 -14 -3 -15 -4 -5
3、 -16 -6 -17 -18 -7 -19 -8 -20 -9 -21 -10 -22 -23 .060 .073 .086 .086 .112 .112 .138 .138 .164 .190 .190 .250 .250 .250 .312 .312 .375 .375 .438 .438 .500 .500 .625 .188 .156 .188 .250 .281 .343 .312 .250 .375 .438 .625 .625 .562 .875 .688 .500 .812 1.000 .922 1.750 1.062 1.620 1.500 .203 .162 .203 .
4、260 .297 .350 .328 .260 .406 .469 .688 .688 .572 .890 .708 .520 .832 1.020 .942 1.760 1.082 1.630 1.520 .183 .150 .183 .245 .275 .338 .305 .245 .365 .425 .600 .600 .550 .860 .678 .490 .802 .990 .912 1.740 1.052 1.610 1.510 .063 .076 .093 .093 .125 .125 .156 .156 .187 .218 .218 .281 .281 .281 .344 .3
5、17 .406 .406 .469 .469 .531 .531 .656 .068 .079 .098 .098 .127 .127 .160 .160 .192 .225 .225 .290 .290 .290 .355 .327 .420 .420 .484 .480 .546 .546 .665 .060 .073 .090 .090 .115 .115 .140 .140 .170 .200 .200 .260 .260 .260 .334 .314 .396 .392 .459 .460 .521 .521 .645 .020 .020 .031 .016 .047 .031 .0
6、47 .020 .047 .047 .047 .047 .062 .031 .047 .031 .047 .080 .047 .031 .047 .020 .062 .024 .024 .035 .021 .049 .035 .049 .024 .065 .065 .065 .065 .070 .035 .065 .035 .065 .090 .065 .041 .065 .025 .080 .016 .016 .025 .011 .031 .025 .031 .016 .031 .031 .040 .040 .056 .025 .040 .025 .040 .070 .040 .021 .0
7、40 .015 .050 AMSC N/A FSC 5310 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51859C REQUIREMENTS: 1. Material: Plastic, polyamide (nylon) in accordance with L-P-410, type 6/6 or ASTM D4066, PA111. 2. Part number: The part number shall cons
8、ist of the basic ms number followed by a dash number from table I. Example: MS51889 - 11 DASH NUMBER BASIC MS NUMBER MS51859-11 indicates: Washer, flat-plastic (nylon); .060 nominal size; .188 outside diameter nominal; .063 inside diameter nominal; .020 thickness nominal. NOTES: 1. All dimensions ar
9、e in inches. 2. In the event of a conflict between the text of this standard and the references cited herein, the text of this standard shall take precedence. Custodians: Preparing activity: Army AR DLAIS iForce 9 (Project 5310 279-0) Review activities: Air Force 71 NOTE: The activities listed above
10、 were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil/. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
