1、SMD-5962-72209 REV C 9999996 0090324 153 m DEFENSE LOGISTICS AGENCY DEFENSE SUPPLY CENTER, COLUMBUS 3990 EAST BROAD STREET COLUMBUS, OH 432164000 IN REPLY REFERTO: DSCC-VAC OCT E9 1996 SUBJECT: Notice of Revision (NOR) 5962-R226-96 for Standard Microcircuit Drawing (SMD) 596292209 Militaryhdwtry Dis
2、tribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After completion, the NOR should be attached to the subject SMD for funire
3、reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DSCC a certificate of compliance. This is evidenced by an existing active current certificate of compliance on file at DSCC wit
4、h a DSCC record of verbal coordination: The certificate of compliance for these devices is considered concurrence with the new revision unless DSCC is otherwise notified. If you have comments or questions, please contact Mr. Bernard Miesse at (614) 692-0543 (DSN 850). 1 Encl hONICA L. POELKING Chief
5、, Custom Microelectronics Team Licensed by Information Handling Services1. ORIGINATOR 3990 East Broad Street Columbus, OH 43216-5000 P. TYPED NAME (first, Middle Initial, Last) b. ADDRESS (Street, City, State, Zip Code) 5. CAGE CODE Defense Supply Center, Columbus 67268 67268 3. TITLE OF DOCUMENT MI
6、CROCIRCUIT, DIGITAL, FAST CMOS, 4 BIT PRESETTABLE BINARY COUNTER WITH ASYNCHRONOUS RESET, lTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON 10. REVISION LETTER a. CURRENT b. NEW B .c rm Form Approved OMB NO. 0704-0188 2. PROCURING ACTIVITY NO. X 3. DODAAC (I) Existing docume
7、nt supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised dowment. 6. NOR NO. 5962-R226-96 8. DOCUMENT NO. 5962-92209 11. ECP NO. 3. ACTI
8、VITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT N/A c. TYPED NAME (First, Middle Initial, Last) Sheet 1: Revisions ltr colunn; add IVi. Revisions description colunn; add IlChanges in accordance with NOR 5962-R226-961i. Revisions date colutm; add 0196-09-3011. Revision level block; change from Y311
9、to llC1l. Rev status of sheets; for sheet 1, change from I1B1l to 10CO1. Table I, low level ground bounce noise, Vop, device types 02, 04 and 06; change maximum limit from 01100011 to II 1500“. Table I, low level ground bounce noise, VOLV, device types 02, 04 and 06; change maximum limit from il-lOO
10、O1l to II- 1700“. Table I, high level VCC bounce noise, VOHV, device types 02, 04 and 06; change maximum limit from Ii-45O1l to “-650“. Table I, high level VCC bounce noise, VOHP, device types 02, 04 and 06; change maxim limit from 1145011 to 1170011. Revision level block; change from I*A“ to Ilcil.
11、 For sheet 8, change from I1AIi to IVi. Sheet 8: i TITLE Chief, Custom Microelectronics 15a. ACTIVITY ACCOMPLISHING REVISION DSCC-VAC e. SIGNATURE f. DATE SIGNED (YYMMDD) Monica L. Poelking 96-09-30 b. REVISION COMPLETED (Signature) c. DATE SIGNED (YYMMDD) Bernard J. Miesce 96-09-30 Licensed by Info
12、rmation Handling Servicesm 9999996 0053770 bT8 m DEFENSE LOGISTICS AGENCY DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OH 45444-5765 IN REPLY REFER ToDESC-ELDC (Mr, Nguyen/(AV 986) 5 13-296-6023/tvn) SUBTECT: Notice of Revision (NOR) 5962-R130-94 for Standardized Military Drawing (SMD) 5962-92209. Mili
13、tary/Industry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After completion, the NOR should be attached to the subjec
14、t SMD for future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DESC a certificate of compliance. This is evidenced by an existing active current certificate of compliance on
15、 file at DESC along with a DESC record of verbal coordination. The certificate of compliance for these devices is considered concurrence with the new revision unless DESC is otherwise notified. If you have comments or questions, please contact Thanh Nguyen at (AV)986-023 or (5 13)296-6023. 1 Encl J
16、6ONICA L. POELKING Chief, Custom Microelectronics Branch Licensed by Information Handling Servicesm b 0053773 534 m COUNTER WITH ASYNCHRONOUS RESET,. TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON 1. DATE (YYMMDD) NOTICE OF REVISION (NOR) 94-03-21 lhis revision described
17、below has been authorized for the document listed. b. NEW No registered a. CURRENT users A B Public reporting.burden for this collection is estimated to average 2 hours per response including the time for reviewing instructions, searching existing data.sources, gathering and mainfaining the data nee
18、ded, and comp eting and reviewing the collection of information. t!lis burden estimate or an for reducin this burden Yo De artment of Defense Washingtion Headquarteh Services Directorate f?r informafion OperationS.and geprts, 1215 Jeffeson Davis Highway, Sulte 1204, Arlin ton VA 22202-4302, and to t
19、he Office of ana ement and Bud et Paperwork Reduction Pro ect (07!4-0k), Hashington DC 20503 RETURN COLETED FORM TO THE GOVERNMENT ISSUING CONTRACTING OFFICER FOR THE CONTRACT/ PROCURING ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM. Send comments regarding including suggestions other aspect of this
20、 collection of information PLEASE DO NOT hURN YOUR COIPLETED FORM TO EITHER OF THhE ADDRESSED 1. (X one) Form Approved OMB NO. 0704-0188 X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change.
21、2. PROCURING ACTIVITY NO. I 3. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT 3. DODAAC r c. TYPED NAME (First, Middle Initial, Last) I b. ADDRESS (Street, City, State, Zip Code) 5. CAGE CODE 6. NOR NO. 4. ORIGINATOR d. TITLE 5962-R130-94 8. DOCUMENT NO. 7. CAGE CODE Defense Electronics Supply
22、 Center a. TYPED NAME (First, Middle Initial, 1507 Wilmington Pike I 5962-92209 Last) Dayton, OH 45444-5765 e. SIGNATURE 9. TITLE OF DOCUMENT 11. ECP NO. 10. REVISION LETTER MICROCIRCUIT, DIGITAL, FAST CMOS, 4-BIT PRESETTABLE BINARY Chief, Custom Microelectronics 15a. ACTIVITY ACCOMPLISHING REVISION
23、 Monica L. Poelking b. REVISION COMPLETED (Signature) Sheet 1: Revisions ltr column; add “8“. Revisions description column; add “Changes in accordance with NOR 5962-R130-94“. Revisions date column; add “94-03-21“. Revision level block; change from “AI to %ll. Rev status of sheets; for sheet 1, chang
24、e from “A“ to Wi. 1.4, minimum high level input voltage (VIH); change from “2.0 VI to “2.7 V“. Revision level block; add “B“. For sheets 3, 6, and 9, add I%“. Sheet 3: Sheet 6: Table I, high level output voltage, VOH1 and VoHz, test conditions column; change VIH from Table I, low level output voltag
25、e, VOL, and VoL2, test conditions column; change VIH from “2.0 Vi to “2.7 V“. “2.0 V“ to “2.7 V“. Revision level block; add i%i. Table I, functional test, test conditions column; change VIH from “2.0 V“ to “2.7 V“ (two places). Revision level block; add “8“. Sheet 9: ,king f. DATE SIGNED (YYMMDD) 94
26、-03-21 c. DATE SIGNED (YYMMDD) 94-03-21 DD Fori 1655, APR 92 Previous editions are obsolete Licensed by Information Handling Services= 9999996 0053772 Y70 NOTICE OF REVISION (NOR) 1. DATE (YYMMDD) I 93-12-22 This revision described below has been authorized for the document listed. 9. TITLE OF DOCUM
27、ENT MICROCIRCUIT, DIGITAL, FAST CMOS, 4-BfT, PRESETTABLE BINARY COUNTER UITH ASYNCHRONOUS RESET, TTL COMPATIBLE INPUTS, LIMITED OUTPUTS VOLTAGE SUING, MONOLITHIC SILICON ACTIVITY NUMBER LISTED IN ITEM 2 OF THIS FORM. 10. REVISION LETTER a. CURRENT b. NEU Initial A 4. ORIGINATOR a. (X one) a. TYPED N
28、AME (First, Middle Initial, Last 1 X (1) Existing document supplemented by the NOR may be used in manufacture. (2) Revised document must be received before manufacturer may incorporate this change. (3) Custodian of master document shall make above revision and furnish revised document. b. ADDRESS (S
29、treet, City, State, Zip Code) I 5. CAGE CODE b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT 7. CAGE CODE Defense Electronics Supply Center 1507 Uilmington Pike Dayton, OH 45444-5270 c. TYPED NAME (First, Middle Initial, Last) e. SIGNATURE Monica L. Poelking b. REVISION COMPLETED (Signature)
30、 Phu H. Nguyen Form Approved OHB No. 0704-0188 f. DATE SIGNED (YYMMDD) 93-1 2-22 c. DATE SIGNED (YYMMDD) 93-1 2-22 2. PROCURING ACTIVITY NO. 3. DODAAC 6. NOR NO. 5962-ROIS-94 8. DOCUMENT NO. 5962-92209 11. ECP NO. N/A All 13. DESCRIPTION OF REVISION Sheet 1: Revisions ltr column; add “A“. Revisions
31、description column; add “Changes in accordance with NOR 5962-ROIS-94“ Revisions date column; add “93-12-22“. Revision level block; add “A“. Rev status of sheets; for sheets 1, 8, and 12, add “A“. Sheet 8: Table I, add following: - Continued on next sheet. 14. THIS SECTION FOR GOVERNMENT USE ONLY I I
32、 DESC-ECC d. TITLE Chief, Custom Microelectronics 15a. ACTIVITY ACCOMPLISHING REVISION DESC-ECC DD Fori 1695, APR 92 Previous editions are obsolete Licensed by Information Handling ServicesW 9999996 0053773 307 = 13. DESCRIPTIOH OF REVISION - COWTIWED Documt NO.: 5962-92209 Revision: A NOR No.: 5962
33、-ROI 5-92 Sheet: 2 of 2 Low level ground bounce noise LOU level ground bounce noise High level Vcc bounce no1 se VOLP voLv - 51 BI - 5/ g/ High level Vcc bounce noise = 3.0 V = 0.0 v :IH TF= +2SC See figure 4 5.0 v Revision level block; add “A“. Sheet 12: Table I, footnote BI, paragraph 4; delete th
34、e following: “For device types 02, 04, and 06, the V the date of this drawing. than 90 days from the date of this drawing.“ ad ground bounce tests were not completed at Limits for tfese parameters shall be added by revision more Revision level block; add “A“. Licensed by Information Handling Service
35、s= 9999996 005377Y 243 LTR DESCRIPTION DATE (YR-MO-DA) APPROVED REV STATUS OF SHEETS 18 PMIC NIA 19 20 21 U 23 STANDARDIZED MILITARY DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTHENT OF DEFENSE AMSC NIA ESC FORM 193 JUL 91 REV I l l SHEET PREPARED BY Phu H N
36、guycn CHECKED BY Thomas J Ricciuti APPROVED BY Tim H Noh DRAWING APPROVAL DATE 93-09-21 REVISION LEVEL DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 MICROCIRCUIT, DIGITAL, FAST CMOS, 4-BIT, PRESETTABLE BINARY COUNTERS, WITH ASYNCHRONOUS RESET, TTL COMPATIBLE INPUTS, LIMITED OUTPUT VOLTAGE SWI
37、NG, MONOLITHIC SILICON CAGE CODE IZE A 1 67268 5962-92209 SHEET 1 OF 23 5962-E369-93 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling Servicesb 0053775 LBT M 1 I. SCOPE STANDARDIZED MILITARY DRAWING DEFENSE ELECTRONICS SUPPLY CENTER D
38、AYTON, OHIO 45444 I 1.1 Scope. This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outl
39、ines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of HIL-STD-883, “Provisions for the use of MIL-STD-683 in conjunction with compliant non-JAN devices“. availab
40、le, a choice of radiation hardness assurance (RHA) levels are reflected in the PIN. When 1.2 m. The PIN shall be as shown in the following exanpie: - 5962 92- - o1 II E X I I I - I - I I I 1 I 1 I I I Lead finish Case Device Devi ce I RHA Federal stock class designator type class outline designator
41、(See 1.2.1) (See 1.2.2) designator (See 1.2.4) (See 1.2.5) I (See 1.2.3) / Drawing number 1.2.1 RHA desianator. Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA Levels and shall be marked with the appropriate RHA designator. the MIL-1-38535 specified RHA levels
42、and shall be marked with the appropriate RHA designator. non-RHA device. Device classes Q and V RHA marked devices shall meet A dash (-) indicates a 1.2.2 Device twds). The device typds) shall identify the circuit function as follows: Device type Generic number Circuit function 01, o2 54FCT161T 4-bi
43、 t, presettable binary counter, with asynchronous reset, TTL cornpatable inputs, and limited output voltage swing. 4-bit, presettable binary counter, with asynchronous reset, TTL compatable inputs, and limited output voltage swing. 4-bit, presettable binary counter, with asynchronous reset, TTL comp
44、atable inputs, and linted output voltage swing. 03, 04 54F CT161 AT 05,M 54FCT161 CT 1.2.3 Device class desiqnator. The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation I SIZE 5962-92209 A REVISION LEV
45、EL SHEET M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of HJL-STD-883 or S Q or V Certification and qualification to MIL-M-38510 Certification and qualification to MIL-1-38535 1.2.4 Case outline(s1. The case wtline(s) shall be as designate
46、d in MIL-STD-1835, and as follows: Outline letter Descriptive desianator Terminals Packacie style E F 2 GDIPI-116 or CDIP2-TI6 16 dual-in-line GDFP2-Fl6 or CDFP3-FI6 16 flat package CQCCI -NZO 20 leadless-chip-carrier package 1.2.5 Lead finish. The lead finish shall be as specified in MIL-M-38570 fo
47、r classes M, 8, and S or MIL-1-38535 for classes Q and V. Finish letter “X“ shall not be marked on the microcircuit or its packaging. for use in specifications when lead finishes A, 8, and C are considered acceptable and interchangeable without The “X“ designation is I preference. DESC FORM 193A JUL
48、 91 Licensed by Information Handling Services= b O053776 Olb = 1.3 Absolute maximum ratinqs. I/ 2/ 3/ Supply voltage range (V 1 - - - - - - - - - - - - - - - - - DC input voltage range FS N) - - - - - - - - - - - - - - - - DC output voltage range tb DC input clamp current (I YTtV DC output clamp cur
49、rent tiK ) DC output source current per output - - - - - - - - - DC output sink current (Io$ per output - - - - - - - - - - Storage temperature range (T Case temperature under bias Maximum power dissipation (PD) - - - - - - - - - - - - - - - Lead temperature (soldering, 10 seconds) - - - - - - - - - - Thermal resistance, junction-to-case (OJc) - - - - - - - - - Junction temperature (TJ) - - - - - - - - - - - - - - - - - 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range (Vc ) - - - - - - - - - - - - - - - - - Input voltage range (V N - - - -
