1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with N.O.R. 5962-R004-96. 95-10-13 M. A. FRYE B Drawing updated to reflect current requirements. - ro 02-03-04 R. MONNIN REV SHET REV B B SHET 15 16 REV STATUS REV B B B B B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8
2、9 10 11 12 13 14 PMIC N/A PREPARED BY RICK OFFICER DEFENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY RAJESH PITHADIA COLUMBUS, OHIO 43216 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY MICHAEL FRYE MICROCIRCUIT, LINEAR, 10 BIT, 40 MSPS,
3、ANALOG-TO-DIGITAL CONVERTER, AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 95-08-11 MONOLITHIC SILICON AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-94759 SHEET 1 OF 16 DSCC FORM 2233 APR 97 5962-E222-02 DISTRIBUTION STATEMENT A. Approved for public release; distribution is
4、 unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing docume
5、nts two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness A
6、ssurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 94759 01 M X X Federal stock class designator RHA designator (see 1.2.1) Devicetype (see 1.2.2) Device class designator Caseoutline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawin
7、g number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA d
8、esignator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 AD9040A 10-bit, 40 MSPS analog-to-digital converter 1.2.3 Device class designator. The device class designator is a sing
9、le letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualificat
10、ion to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X GDIP4-T28 28 Dual-in-line Y See figure 1 28 Flat pack with gull wing leads 1.2.5 Lead finish. The lead finish is as specif
11、ied in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000
12、REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Positive voltage supply (+VS) . +7 V Negative voltage supply (-VS) -7 V Analog inputs . -VSto +VSDigital inputs . 0 V to +VSReference voltage input . 0 V to +VSDigital output current 20 mA Storage temperature range -65C
13、to +150C Junction temperature (TJ) +175C Lead soldering temperature (10 seconds) . +300C Thermal resistance, junction-to-case (JC): Case X 10C/W Case Y 13C/W Thermal resistance, junction-to-ambient (JA): Case X 32C/W Case Y 43C/W 1.4 Recommended operating conditions. Positive voltage supply (+VS) .
14、+5 V Negative voltage supply (-VS) -5 V Ambient operating temperature range (TA) -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless othe
15、rwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. SPECIFICATION DEPARTMENT OF DEFENSE MIL-PRF-38535 - Integrated Circuits, Manufacturing, General
16、Specification for. STANDARDS DEPARTMENT OF DEFENSE MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum level
17、s may degrade performance and affect reliability. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97
18、HANDBOOKS DEPARTMENT OF DEFENSE MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Unless otherwise indicated, copies of the specification, standards, and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Bui
19、lding 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exe
20、mption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shal
21、l not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, constructio
22、n, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein and figure 1. 3.2.2 Terminal connections. The terminal c
23、onnections shall be as specified on figure 2. 3.2.3 Block diagram. The block diagram shall be as specified on figure 3. 3.3 Electrical performance characteristics and post irradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and post irradiation
24、 parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking
25、. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked as listed in MIL-HDBK-103. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“
26、on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certifi
27、cation mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a
28、 QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of
29、 compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and here
30、in. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. Provided by IHSNot for ResaleNo reproduction or netw
31、orking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA +125C unless otherw
32、ise specified Group A subgroups Device type Limits 2/ Unit Min Max DC accuracy section Differential nonlinearity DNL 4 01 -1 +2 LSB 5,6 -1 +2.5 Integral nonlinearity INL 4 01 -2 +2 LSB 5,6 -2.5 +2.5 Gain error GE 3/ 4 01 -1.5 +1.5 % of FS 5,6 -3 +3 No missing codes NMC 4/ 4,5,6 01 0 Input capacitanc
33、e CINSee 4.4.1c 5,6 01 15 pF Analog input section Input offset voltage VIO1 01 -25 +25 mV 2,3 -30 +30 Input bias current IIB1 01 15 A 2,3 25 Input resistance RINTA= +25C 4 01 200 1000 k Bandgap reference section Output voltage VOUT1,2,3 01 2.4 2.6 V See footnotes at end of table. Provided by IHSNot
34、for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbo
35、l Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits 2/ Unit Min Max Switching performance section Maximum conversion rate MCR 9,10,11 01 40 Msps Minimum conversion rate MCR 9 01 10 Msps 10,11 4/ 10 Output propagation 5/ delay tPDSee figure 4 9 01 7.5 12 ns 1
36、0,11 4/ 6 14 Dynamic performance section Signal-to-noise ratio 6/ SNR fIN= 2.3 MHz, TA= +25C 4 01 51 dB fIN= 10.3 MHz, TA= +25C 50 ENCODE = 32 Msps, fIN= 2.3 MHz, TA= +25C 52 ENCODE = 32 Msps, fIN= 10.3 MHz, TA= +25C 51 Signal-to-noise ratio 6/ (without harmonic) SNR fIN= 2.3 MHz, TA= +25C 4 01 52 d
37、B fIN= 10.3 MHz, TA= +25C 51 ENCODE = 32 Msps, fIN= 2.3 MHz, TA= +25C 53 ENCODE = 32 Msps, fIN= 10.3 MHz, TA= +25C 53 2 nd harmonic distortion 2 nd fIN= 2.3 MHz, TA= +25C 4 01 56 dBc fIN= 10.3 MHz, TA= +25C 56 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking
38、permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA +125C unless oth
39、erwise specified Group A subgroups Device type Limits 2/ Unit Min Max Dynamic performance section - continued 3 rd harmonic distortion 3 rd fIN= 2.3 MHz, TA= +25C 4 01 58 dBc fIN= 10.3 MHz, TA= +25C 58 Aperature uncertainty (jitter) AU TA= +25C 4/ 9 01 25 ps Encode input section Logic “1” voltage VI
40、N11,2,3 01 4.0 V Logic “0” voltage VIN01,2,3 01 1.0 V Logic “1” current IIN11,2,3 01 -1.0 +1.0 A Logic “0” current IIN01,2,3 01 -1.0 +1.0 A Encode pulse width (high) tEHSee figure 4 7/ 9 01 10 100 ns 10,11 4/ 10 100 Encode pulse width (low) tELSee figure 4 7/ 9 01 10 100 ns 10,11 4/ 10 100 Digital o
41、utput section Logic “1” voltage VOUT11,2,3 01 4.95 V Logic “0” voltage VOUT01,2,3 01 0.05 V See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CENTER COLUMBUS
42、COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits 2/ Unit Min Max Power supply section VDDsupply current IDD1,2,3
43、01 20 mA +VSsupply current +IS1 01 110 mA 2,3 115 -VSsupply current -IS1 01 105 mA 2,3 110 Power dissipation PD1 01 1.15 W2,3 1.2 Power supply rejection ratio PSRR TA= +25C 8/ 1 01 -15 +15 mV/V 1/ Unless otherwise specified, +VS= +5 V, -VS= -5 V, internal reference, ENCODE = 40.5 Msps, and 50 % duty
44、 cycle 10 %. 2/ The algebraic convention, whereby the most negative value is a minimum and the most positive is a maximum, is used in this table. Negative current shall be defined as conventional current flow out of a device terminal. 3/ Gain relative to 2.048 VPP. 4/ This test is guaranteed by desi
45、gn and characteristics testing over the full military temperature range. 5/ Output propagation delay (tPD) is measured from the 50 % point of the falling edge of the encode command to the minimum/maximum voltage levels of the digital outputs with 10 pF maximum loads. 6/ RMS signal to rms noise with
46、analog input signal 1.0 dB below full scale at specified frequency. 7/ For rated performance at 40 Msps, duty cycle of encode command should be 50% 10%. 8/ Measured as the ratio of the change in offset voltage for a 5% change in +VSor -VS. 3.8 Notification of change for device class M. For device cl
47、ass M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change as defined in MIL-PRF-38535, appendix A. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain
48、 the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 57 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94759 DEFENSE SUPPLY CEN
