1、c i; T-C-2754 40 7797774 0042348 2 m T-C-2754 February 5, 1990 FEDERAL SPECIFICATION CORD, FOLESTER, CORELESS This specification is approved the ammissioner, Federal Supply Service, General Services ministration, for the use of all Federal agencies. 1. 933PE 1.1 Scope. This spcification avers braide
2、d polyester areless Parachute Cord. 1.2 Classification. !the cord shall be of the followirg typs as spcified -(see 6.2). Type I - 180 feet per purd Type II - 120 feet per purd 2.1 Govenment docunents. Unless otherwise specified, the followirg docurients of the issue in effect m date of invitation fo
3、r bids or request for proposal form a part of this specification to the extent spcified herein. Federal Specifications: -T-81 - Tags, ShipPing and Stock PPP-B-ml - Boxes, W, Cleatd-Plymd PPP-E636 - Boxes, ShiFpiq, Fiberboard Federal Standard: FED-STD.191 - Textile *st Metbodc Beneficial cami2nts (re
4、camilsdations, additions, deletions) ard any pertinent data which may be of uce in improvirg this doamnt should ke addressed to: Center, mtick, MA 017635014 by usirq the self-addressed Standardization DoCunent Improvmnt Proposal (DD Form 1426) ap?aring at the erd of this doCunent or by letter. U.C.
5、Army Natick Research, Developnent, ard nigineerirq msc N/A FSC 4020 DISTR113UTION STATEMENT A. Approved for plblic release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-T-C-2754 40 7777774 00423Li7 4 W T4-2754 (ktivities
6、 outside the Federal Governrent may obtain copies of Federal specifications, staridards, and mnmrcial ita descriptions as atlined under General Information in i3?s Index of Federal ecifications, Stardards and Ctmercial Ita Descriptions. issued, is for sale on a subscription basis by the Suprintenden
7、t of Ducunents, U.S. Goverrment Printing ffice, mshington, Ix: 20402). (Single copies of this specification, and other Federal cpecifications and mnrercial iten descriptions required ky activities atside the Federal Govermt for bidding purposes are available without charge fran General Services Mrni
8、nistration Business Service Centers in Boston, MA; New York, NY; Philadelphia, PA; Washington, Dc; Atlanta, GA; Chicago, IL; Kansas City, lux); Fort Worth, TX; muston, TX; Enver, a; San Francisco, CA; os Angeles, CA; and sattle, i%) ?he Index, hich incldes mulative bimonthly supplenents as (Federal
9、Govermnt activities may obtain copies of Federal staridardization docments and the Idex of Federal mifications, Standards and Cam-ercial Iten Descriptions fran established distribution pints in their agencies.) Military Specification: MIM-3131 - Cordage; Packaging f MILL-35078 - Loads, Unit: Prepara
10、tion of Clothing, ersonal l3quipnent arid mipage; ensral Specification For Militam Staridards: MILSTD-105 - Sampling Proccedures and Tables for Inspection ky Attributes MiL-SI-129 - Marking for Shiplient atxi Storage MIGSTD-147 - Palletized Unit ioads MLSTD.731 - Quality of F;lood mrs for Cbntainers
11、 arid Pallets (Cbpies of Military cpecifications and standards required ky contractors in connection with specific procuranent functions should be obtained fran the procuring activity or as directed ky the contracting xtivity.) 2.2 other plblications. The following docunents form a part of this spec
12、ification to the extent specified herein. unless a specific issue is identified the iscue in effect on date of invitation for bid or rapsst for proposal shall amlY D 3951 - Standard Practice for carniercial Packaging (Application for copies should be 4.5. - - 3.7 Finish. The cord shall be finished w
13、ith an acrylic resin smh as to result in an additional eight not to exceed 2 percent. 3.7.1 Tackiness. The cord shall not be excessively tacky. The force required to separate the lines shall be not greater than 23 pounds anped, or SIped with wter insoluble ink. ?he ticket or label shall contain the
14、followirq: The Ihe ticket ar Stock nunber item description incldirig type (i or II) Specification nunber krigth Nunber and length of pies (vkn appiicabe) Color Contract riunber and date Date of manufacture (mth ard year) ktqth of pies of cord per spool (w3len elicable) Contractors ne Bar code 3.13 W
15、OrlaMnchip. The fabricated cord shall conform to the quality and grade of product established by this specification. 4. QUALITY ASSEE PRWISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the mntract or purchase order, the mntractor is responsible for the performanae of all insp
16、ection requiranents (exmimtions and tests) as cpecified herein. Except as otherwise specified in the contract or plrchase order, the contractor my use his own or any other facilities suitable for the perfoimance of the inspection requirailents specified herein, unless disapproved by the Govemnt. ?he
17、 Govermnt reserves the right to perform any of the inspections set forth in this qxcification where cuch inspections are M mcessary ta ensure supplies and services conform to prescribed requirmts. I 4.1.1 Responsibility for carq?liance. All itens shall nilet all requirarients of sections 3 arid 5. p
18、art of the antractors overall inspedion system or quality program. ?he absence of aq inspection requirmnts in the specification shall not relieve the mtractor ?he inspection set forth in this specification shall becaii2 a Provided by IHSNot for ResaleNo reproduction or networking permitted without l
19、icense from IHS-,-,-T-C-2754 of the responsibility of ensuring that all podlaJts or suwlies suhitted to the 1 mvermnt for acceptance ccmply with all requirments of the mntract. Sanplirq inspection, as part of manufacturing opzrations, is an acceptable practice to ascertain rnnformancx to requirenent
20、s, hmver, this does not authorize suhnission of known defective material, eithsr indicated or actual, nor does it mit the Govemnt to accept defective material. 4.1.2 Certificates of carpliance. men rtificates of caripliance are suhnittd, the Goverment reserves the right to insp2ct such itans to dete
21、rmine the validity of the certification. 4.2 Classification of inspections. The incpection requirenents specified herein are classified as follows: a. First article inspection (see 4.3) b. Quality conformarize inspection (see 4.4). 4.3 First article inspection. men a first article is required (see 3
22、.1 and 6.2), it shall be exmined for the defects specified in 4.4.2 through 4.4.4.2 and shall be tested as spwifid in 4.4.5. , 4.4 Wlity conformance inspection. nless otherwise spcified, sanpling for inspection shall be performed in aocordance with MIL-ST-105. 4.4.1 Canponent ad material inspection.
23、 In accordance with 4.1, canponents and materials shall be inspctcted in accordanoe with all the recluiranerits of referenced docurutnts mless otherwise excluded, amended, modif id, or -qmlif ied in this specification or applicable wchase donment. 4.4.1.1 Capnent and mterial certification. A certifi
24、cate of mnpiance my be acceptable as evidence that the characteristics listai in table III conform to the cpecified requirmsnts. TABLE III. Carq-nent ard mterial certification Character istic mi rent paragraph Material Denier “emcity ength of cord on -01 (reel) is more than 6 feet less than lenrigth
25、 marked on ticket or label. i 4.4.4.2 Efects with regard to wirding. Defects shall be considered to exist if any of the following conditions are determined durirg inspction: a. b. d. e. f. g. 4.4.5 C. improprly or not firmly wund, resulting in kinking, knotting, entangling, Fut-up not as specified.
26、Any end not heat sealed. Knot or otherwise joining of E V. W iten tests NO. of deter- minations par miranent %St i rd iv idual Results characteristics reference method simple mit reported as Construc tion: Picks pr inch NLanber of carriers Nunber of ends per carrier per pound Breakirg strergth Elorg
27、at ion Shrinkage Cblor f astness : To light TO launderirg Tackiness Resistance to light Resistance to ht Extractable matter (chlorofonn-soluble material) Table I Table I Table I Table I Table I Table I 3.5 3.6.2 3.6.2 3.7.1 3.9 3.9 3.10 6001 y 1 visual 3 visual 3 6004- 6016 6016 - 2/ 6010 5660 3/ 1
28、5614 x/ - 1 4.5.3 8 4.5.1 - 4.5.2 - 2611 - TO warest L, expressei in teims of defects pr hundred units, shall be 6.5. 4.4.7 Palletization exanination. me fully pckaged and palletized erd itens Tne lot si= shall ke expressei in ?he sanpie mit shall ke one plletized unit load, Manine Defect Finished d
29、inensions Leqth, width, or height exceeds cpecified mimm requirenent Palletization pallet pattern not as -ifid Interlocking of loads mt as spxifid bad not bondei with required straps as Fified weight Exceedsmaxhun load limits iuhrking nittd; incorrect; illegible; of improprr size, location, sequence
30、, or ni2thod of qqlication 4.5 *thods of inspection. 4.5.1 Cetennimtion of resistance to light. Five test speckrms shall be taken fran each sanple unit. ?he test spximei-lc sMl be -sed in the accelerated watherirq unit as cpecified in Method 5804 of FED-ST-191. Trie spximens shall be placd side by s
31、ide cn the rack in swh a manner that only the enter 10 inches to 18 inches of each spximen is exposed without being shielded by the rack. vnbacked specimens shall be exposed either munted in stainless steel framec or as a large piece susprded fran the cutside rim of the exposure rack. Corex D filter
32、s ard sunshiw carbons shall be usd. heads shall be shut off duriq the entire -me period and the relative hunidity in the test chanber during the exposure shall be 55 + 5 percent. shall contain fran 1/2 to 1 inch of water durirq izcordance with MIMT)-129 or As?M D 3951, as applicable. 6. Notes (This
33、section contains information of a general or explanatory nature that may be helpful, but is not mandantory.) 6.1 Intedd use. The cord is inMd for use in the E-4 Raan Air Parachute Systm. 6.2 Acquisition requirenents. misition docuwnts must specify the followirig: a. b. C. - d. e. f. g* h. i. j. Titl
34、e, nunber, ad date of this specification. Typ (see 1.2). ssue of WISS to be cited in the solicitation, and if required, the specific issue of individual docunents refered (see 2.1.1 ad 2.2). Fd-ien first article is required (see 3.1, 4.3, and 6.3). men shade Canouflqe Green 483 is required (see 3.6)
35、. Fut-up if other than specified (see 3.11). kvels of preservation and packing (see 5.1 ard 5.2) . Type of shipping container desired for level A packing (se 5.2.1). Type and class of unit load required for level A packitq (see 5.2.1) . Falen palletization is required (see 5.3). 6.3 First article. P
36、hen a first article is required, it hii be inspected ad ?he first article should ?he contracting officer should specify the mropriate approved under the appropriate provisions of FAR 52.239. be a preprodclvtion scmple. type of first article and the nunber of mits to be furnished. officer should also
37、 include specific instmxtions in acquisition docunents regarding arrarigcments for selection, inspzction, ard approval of the first article. ?he contracting 6.4 Standard mple. For access to sanples, address the contracting activity issuign the invitation for bids. 6.5 Silbject tem (key wrd) listing.
38、 M2-4 Parachute Cbrd Ran Air 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-T-C-275Li Li0 = 779777Li 0042360 3 Custodians: 0 W-GL Navy-Ac &view ktivities: W- ME, TS Navy-SH Air mrce - a2 DIA - IS T-C-2754 preparing ktivity: Aniry - GL (project 40
39、x)-o3) 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-T-C-275Li Li0 W 777777Li 0042363 5 W T-C-2754 14 4 QI k 7 M *Pl k C 4 U.S. GOMFMENT FRIWIffi OFFICE: 1990 704-034/30295 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
