1、A-A-51269 9 December 1985 COMMERCIAL ITEM DESCRI PTION JAR, SURGICAL NEEDLE The General Services Administration has authorized the use of this commercial item description in preference to Federal Spec i fi cat ion RR-J -170, This Commercial Item Description covers a corrosion-resisting steel jar and
2、 cover designed to hold sterile hypodermic needles, alcohol sponges, cotton balls, vaseline gauze, and safety and common pins for use in military medical treatment facilities. Salient characteristics: Shall be a steel jar and cover designed to hold sterile hypodermic needles, alcohol spon es, cotton
3、 balls, vaseline gauze, and safety and common pins. The design shall faci 7 itate easy cleaning, Jar shall have an outside diameter of approximately 3-1/8 inches with a minimum height of 2-3/16 inches. Jar cover shall be approximately 3/4 inch in height with either a square or rounded strap handle a
4、pproximately 9/16 inch high, Handle shall be securely spotwelded to the cover top. Spotwelding shall be thorough, sound, and free frm pits, flashes, and discoloration. Finger clearance shall be adequate. Jar and cover shall be formed seamlessly from one single piece of corrosion-resisting steel, Ame
5、rican Iron and Steel Institute (AISI) 300 series, with a thickness of not less than 0.025 inch (No. 24, United States standard gage), which shall not be reduced below 0,024 inch in thickness at any point in the finished jar. Strap handle shall be a minimum of 0.031 inch thick (No. 22, United States
6、standard gage). The cover shall fit snugly, but not tightly, over the body, so that the cover may be removed with one hand without the need for holding the jar in the other hand. The jar shall not rock while resting on a flat surface. Jar, cover, and handle shall be free of sharp edges, dents, crack
7、s, tears, ripples, or deformities. Jar and cover shall have a commercial No. 4 finish or better. Workmanshi The surgical needle jar shall be free from defects which detract from + I s appearance or impair its serviceability. Unit. Each (EA). One jar, of the size specified, constitutes one unit. FSC
8、6530 DISTRIBUTION STATEMENT A. Apprwed for public release; distribution is unlimited. AMSC W/A f- THIS DOCUMENT CONTAINS A- - PAGES. y, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-51269 65 W 7777774 002bb77 2 A -A -5 1269 Contractor certifica
9、tion. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. reserves the right to require proof of such conformance prior to first delivery an
10、d thereafter as may be otherwise provided for under the provisions of the contract. Regulatory requirements. If the product covered by this document has been determined by the U. S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor chal 1 comply, and be responsible fo
11、r compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other a
12、pplicable Federal, State, and local statutes, ordinances, and regulations. The Government Federal Food, Drug and Cosmetic Act, In addition, the Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580 to the maximum extent practical Pre
13、servation, packaging, packing, labeling, and marking. preservation, packaging, and packing shall be to a degree of protection to preclude Unless otherwise specified, damage to containers and/or contents thereof under normal shipping conditions, handling, etc, involving shipment from the supply sourc
14、e to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. marking shall be as specified in the contract and/or order. The following National Stock Number is covered by this document: Intermediate and exterior package quantit
15、ies and labeling and 6530-00-782-7400 Ordering data. must be specified in the contract and/or order, MILITARY INTERESTS: PREPARING ACTIVITY: Intermediate/exterior package qyantities and labeling and marking Custodians: N a v y -1-1 S Air Force-O3 Amy-MD CIVIL AGENCY COORDINATING ACTIVITY: VA-OSS PGC 50401 2 DoD-MB Agent: DLA-DM Project No. 6530-1808 Location H1-16-4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
