DOD A-A-53893-1989 POWER SUPPLY (120 VOLT 50 60 HZ AC)《电源(交流电50 60赫兹120伏特)》.pdf

上传人:diecharacter305 文档编号:701693 上传时间:2019-01-01 格式:PDF 页数:4 大小:157.80KB
下载 相关 举报
DOD A-A-53893-1989 POWER SUPPLY (120 VOLT 50 60 HZ AC)《电源(交流电50 60赫兹120伏特)》.pdf_第1页
第1页 / 共4页
DOD A-A-53893-1989 POWER SUPPLY (120 VOLT 50 60 HZ AC)《电源(交流电50 60赫兹120伏特)》.pdf_第2页
第2页 / 共4页
DOD A-A-53893-1989 POWER SUPPLY (120 VOLT 50 60 HZ AC)《电源(交流电50 60赫兹120伏特)》.pdf_第3页
第3页 / 共4页
DOD A-A-53893-1989 POWER SUPPLY (120 VOLT 50 60 HZ AC)《电源(交流电50 60赫兹120伏特)》.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、A-A-53893 66 m 999797L1 OOLLLBL 2 M p-/s-03 A-A-53 89 3 14 April 1989 COMMERCIAL ITEM DESCRIPTION POWER SUPPLY (120 Volt, 50/60 Hz, AC) The General Services Administration has authorized the use of this Commercial Item Description. This conimercial item description covers a DC rectifier adapter for

2、alternate operation of a battery powered microhematocrit centrifuge from an AC supply line. Salient characteristics. Shall be an electrical power pack for alternate use with a microhematocrit centrifuge, that can also be internally powered by six (6) size C manganese-alkali battery cells. Shall incl

3、ude a rectifier circuit for converting a 120 volt, 50/60 Hz, AC line voltage input to 6.5 volts DC output. Shall be rated for at least 3 watts operation, and shall be capable of providing 6.5 volts and 400 milliampere DC outputs when connected to a microhematocrit centrifuge, designed to have an ope

4、rating speed of 11,500 rpm and a programmed centrifugation time of at least 3 minutes and 20 seconds. Shall be supplied with an AC input 3-wire line cord that terminates with a non-detachable three-blade male connector use in receptacles conforming to ANSI C73-11. Shall be supplied with an output co

5、rd with a connector that is suitable for direct connection to a microhematocrit centrifuge. for Workmanship. detract from its appearance or impair its serviceability. Unit. Each (EA). One power supply, as specified, constitutes one unit. The power supply shall be free from defects which AMSC N/A FSC

6、 6640 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. / THIS DOCUMENT CONTAINS PAGES. Licensed by Information Handling ServicesProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-53843 bb W 494797q OOllL82 4 A- A- 5

7、 3 8 9 3 Quality Assurance Provisions. e Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order,

8、 the contractor may use his own or any facilities suitable or the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed ne

9、cessary to assure supplies and services conform to prescribed requirements. Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during

10、 the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedure

11、s) and testing (determination by technical means of physical and chemical properties) of the item. Inspections and testing. Inspection and testing shall be conducted on each power supply to demonstrate its capability for proper operation. Metric products. Products manufactured to metric dimensions w

12、ill be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this document are met. If a product is manufactured

13、to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product . 2 Provided by IHSNot for Re

14、saleNo reproduction or networking permitted without license from IHS-,-,-A-A- 5 3 8 9 3 Contractor certification. The contractor shall certif! product offered meets the salient characteristics of tl th is iescription and conforms to the producers own drawings, t the specifications, standards, and qu

15、ality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Recovered materials. The offeror/contractor is encouraged to use recovered material in accor

16、dance with Public Law 94-580, as amended, and as implemented by Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation, packaqinq, packinq, labelinq, and marking. Unless otherwise specified, preservation, packaging, and packing shall be to a deg;ee of protection to

17、 preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exte

18、rior package quantities and labeling and marking shall be as specified in the contract and/or order. NOTE: The following National Stock Number is covered by this document : 6640-01-070-1500 The following National Stock Numbers covers battery operated centrifuges intended for use with subject power s

19、upply: 6640-01-068-9612 (CENTRIFUGE, LABORATORY, Microhematocrit, Battery Powered, 9 Volt,- DC) 6640-01-205-2422 (CENTRIFUGE, LABORATORY, Microhematocrit, Battery Powered, 9 volt, DC) 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5 3 8 9 3 Or

20、dering data. (Intermediate/exterioE package quantities and labeling and marking must be specified in the contract and/or order) MILITARY INTERESTS: PREPARING ACTIVITY: DOD - MB Custoians: Army - MD Navy - MS Air Force - 03 CIVIL AGENCY COORDINATING ACTIVITIES: Agent: DLA-DM VA-OSS PHS FDA-MPQAS Project No. 6640-1559 Location: Disk No, 16 CID/POWER/SUPPLY/S31 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • ASTM A1080-2012 Standard Practice for Hot Isostatic Pressing of Steel Stainless Steel and Related Alloy Castings《钢 不锈钢和相关合金铸件的高温等静力压制的标准实施规程 n》.pdf ASTM A1080-2012 Standard Practice for Hot Isostatic Pressing of Steel Stainless Steel and Related Alloy Castings《钢 不锈钢和相关合金铸件的高温等静力压制的标准实施规程 n》.pdf
  • ASTM A1080-2014 Standard Practice for Hot Isostatic Pressing of Steel Stainless Steel and Related Alloy Castings《钢 不锈钢和相关合金铸件的高温等静力压制的标准实施规程》.pdf ASTM A1080-2014 Standard Practice for Hot Isostatic Pressing of Steel Stainless Steel and Related Alloy Castings《钢 不锈钢和相关合金铸件的高温等静力压制的标准实施规程》.pdf
  • ASTM A1080-2015 Standard Practice for Hot Isostatic Pressing of Steel Stainless Steel and Related Alloy Castings《高温等静力压制钢 不锈钢和相关合金铸件的标准实践规程》.pdf ASTM A1080-2015 Standard Practice for Hot Isostatic Pressing of Steel Stainless Steel and Related Alloy Castings《高温等静力压制钢 不锈钢和相关合金铸件的标准实践规程》.pdf
  • ASTM A1081 A1081M-2012 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand《七股预应力钢绞线粘合评估的标准试验方法》.pdf ASTM A1081 A1081M-2012 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand《七股预应力钢绞线粘合评估的标准试验方法》.pdf
  • ASTM A1081 A1081M-2015 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand《评估七股预应力钢绞线粘结性的标准试验方法》.pdf ASTM A1081 A1081M-2015 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand《评估七股预应力钢绞线粘结性的标准试验方法》.pdf
  • ASTM A1082 A1082M-2012 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications《专用设施用高强度沉淀硬化和双相不锈钢螺栓的标准规.pdf ASTM A1082 A1082M-2012 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications《专用设施用高强度沉淀硬化和双相不锈钢螺栓的标准规.pdf
  • ASTM A1082 A1082M-2015 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications《特殊目的应用高强度沉淀硬化和双相不锈钢螺栓的标准.pdf ASTM A1082 A1082M-2015 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications《特殊目的应用高强度沉淀硬化和双相不锈钢螺栓的标准.pdf
  • ASTM A1082 A1082M-2016 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications《用于特殊设施的高强度淀积硬化和双相不锈钢螺栓的标.pdf ASTM A1082 A1082M-2016 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications《用于特殊设施的高强度淀积硬化和双相不锈钢螺栓的标.pdf
  • ASTM A1083 A1083M-2012 Standard Specification for Steel Sheet Cold-Rolled Carbon Structural High-Strength Low-Alloy Produced by Twin-Roll Casting Process《通过双转铸造工艺生产的冷轧、碳素、结构、高强度低合金.pdf ASTM A1083 A1083M-2012 Standard Specification for Steel Sheet Cold-Rolled Carbon Structural High-Strength Low-Alloy Produced by Twin-Roll Casting Process《通过双转铸造工艺生产的冷轧、碳素、结构、高强度低合金.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1