DS 2362-1-1994 Measuring equipment-Inclination measuring instruments-Part 1 Inclination measuring instruments (levels)-Definitions requirements testing《测量设备 倾斜度测量仪器 第1部分：倾斜角测量仪器（水平.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F1837M-1997(2007) Standard Specification for Heat-Shrink Cable Entry Seals (Metric)《热缩电缆引入密封的标准规范(公制)》.pdf

ASTM F1837M-1997(2012)e1 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)《热缩电缆引入密封的标准规范 (米制)》.pdf

ASTM F1838-1998(2004)e1 Standard Performance Requirements for Childs Plastic Chairs for Outdoor Use《户外用儿童塑料椅的标准性能要求》.pdf

ASTM F1838-1998(2008) Standard Performance Requirements for Childs Plastic Chairs for Outdoor Use 《户外用儿童塑料椅标准实施要求》.pdf

ASTM F1838-2018 Standard Performance Requirements for Childs Plastic Chairs for Outdoor Use.pdf

ASTM F1839-2001(2007) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments《作为测试矫形装置和仪器的标准物质的硬质聚氨酯泡沫的标准规范.pdf

ASTM F1839-2008 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments.pdf

ASTM F1839-2008(2012) Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments《用作整形外科器械和仪器试验用标准材料的硬质聚氨酯泡沫的标.pdf

ASTM F1839-2008(2012)e1 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments《用作整形外科器械和仪器试验用标准材料的硬质聚氨酯泡沫.pdf