DS EN 2791-1991 Aerospace series Rods ends adjustable single fork and threaded shank with engagement 1 5 x thread Dimensions and loads《航空与航天 带旋入深度为1 5X螺纹直径螺杆的单项可调叉头 尺寸和荷载》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D1002-2005 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)《用拉力负载法测定单面搭接粘结的金属试样表面剪切强度.pdf

ASTM D1002-2010 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)《用拉力负载测定金属之间胶粘剂抗剪切强度特性的标准试.pdf

ASTM D1003-2000 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics《透明塑料混浊度和透光系数的标准试验方法》.pdf

ASTM D1003-2007 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics《透明塑料的透光率和雾度的测定用标准试验方法》.pdf

ASTM D1003-2007e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics《透明塑料混浊度和透光率的标准试验方法》.pdf

ASTM D1003-2011 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics《透明塑料混浊度和透光率的标准试验方法》.pdf

ASTM D1003-2011e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics《透明塑料霾和透光率的标准试验方法》.pdf

ASTM D1003-2013 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics《透明塑料混浊度和透光系数的标准试验方法》.pdf

ASTM D1004-2007 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting《塑料薄膜和塑料薄板的抗撕裂强度》.pdf