DS INSTA 550-1988 Packaging Symbols for opening methods《包装 打开方法符号》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN ISO 2244-2002 Packaging - Complete filled transport packages and unit loads - Horizontal impact tests (ISO 2244 2000) German version EN ISO 2244 2002《包装 满载的运输包装及成组装运 水平冲击试验 .pdf

DIN EN ISO 2247-2002 Packaging - Complete filled transport packages and unit loads - Vibration tests at fixed low frequency (ISO 2247 2000) German version EN ISO 2247 2002《包装 满载的运输.pdf

DIN EN ISO 225-2011 Fasteners - Bolts screws studs and nuts - Symbols and descriptions of dimensions (ISO 225 2010) Multilingual version EN ISO 225 2010《紧固件 螺栓 螺钉 螺柱和螺母 尺寸规格描述和标志(I.pdf

DIN EN ISO 228-1 Bb 1-2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1 Dimensions tolerances and designation Limits of size《非螺纹密封连接的管螺纹 第1部分 尺寸、公差.pdf

DIN EN ISO 228-1-2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1 Dimensions tolerances and designation (ISO 228-1 2000) German version EN ISO 228.pdf

DIN EN ISO 228-2-2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2 Verification by means of limit gauges (ISO 228-2 1987) German version EN ISO 228.pdf

DIN EN ISO 2286-1-2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1 Methods for determination of length width and net mass (ISO 2286-1 2016) .pdf

DIN EN ISO 2286-2-2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2 Methods for determination of total mass per unit area mass per unit area .pdf

DIN EN ISO 2286-3-2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3 Method for determination of thickness (ISO 2286-3 2016) German version EN.pdf