ASTM D3548-2009 Standard Specification for Ethyl Acrylate《丙烯酸乙酯的标准规范》.pdf

上传人:赵齐羽 文档编号:514978 上传时间:2018-12-02 格式:PDF 页数:2 大小:65.02KB
下载 相关 举报
ASTM D3548-2009 Standard Specification for Ethyl Acrylate《丙烯酸乙酯的标准规范》.pdf_第1页
第1页 / 共2页
ASTM D3548-2009 Standard Specification for Ethyl Acrylate《丙烯酸乙酯的标准规范》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、Designation: D 3548 09Standard Specification forEthyl Acrylate1This standard is issued under the fixed designation D 3548; the number immediately following the designation indicates the year oforiginal adoption or, in the case of revision, the year of last revision. A number in parentheses indicates

2、 the year of last reapproval. Asuperscript epsilon () indicates an editorial change since the last revision or reapproval.1. Scope*1.1 This specification covers ethyl acrylate (99 % grade) foruse in paint, varnish, lacquer, and related products.1.2 The following applies to all specified limits in th

3、isstandard; for purposes of determining conformance with thisstandard, an observed value or a calculated value shall berounded off “to the nearest unit” in the last right-hand digitused in expressing the specification limit, in accordance withthe rounding-off method of Practice E29.1.3 The values st

4、ated in SI units are to be regarded asstandard. No other units of measurement are included in thisstandard.1.4 For specification hazard information and guidance, seethe Suppliers Material Safety Data Sheet for materials listed inthis specification.1.5 This standard may involve hazardous materials, o

5、pera-tions, and equipment. This standard does not purport toaddress all of the safety problems associated with its use. It isthe responsibility of the user of this standard to establishappropriate safety and health practices and determine theapplicability of regulatory limitations prior to use. Spec

6、ifichazard statements are given in 4.1.2. Referenced Documents2.1 ASTM Standards:2D 1209 Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)D 1364 Test Method for Water in Volatile Solvents (KarlFischer Reagent Titration Method)D 1613 Test Method for Acidity in Volatile Solvents andChemic

7、al Intermediates Used in Paint, Varnish, Lacquer,and Related ProductsD 3125 Test Method for Monomethyl Ether of Hydro-quinone in Colorless Monomeric Acrylate Esters andAcrylic AcidD 3362 Test Method for Purity of Acrylate Esters by GasChromatographyD 5386 Test Method for Color of Liquids Using Trist

8、imulusColorimetryE29 Practice for Using Significant Digits in Test Data toDetermine Conformance with SpecificationsE 300 Practice for Sampling Industrial Chemicals2.2 U.S. Federal Specification:3PPP-C-2020 Packaging of Chemicals, Liquid, Dry, andPaste3. Properties3.1 Ethyl acrylate shall conform to

9、the following require-ments:Purity wt % as ethyl acrylate, min 99.5Water wt %, max 0.08Color, Pt-Co scale, max (Note 1) 10 in bulk shipments, 20 in drumshipmentsAcidity (free acid as acrylic acid)wt %, max0.008Methyl ether of hydroquinone wppm, min 10AAor as agreed upon between the purchaser and the

10、 manufacturer. Lower levelsare not recommended for safety reasons.NOTE 1Instrumental Pt-Co color determined by Test Method D 5386have been shown to have no statistically significant difference from Pt-Cocolor determined by Test Method D 1209. However, it is not knownwhether ethyl acrylate was part o

11、f the sample set included in theinterlaboratory study.4. Precaution4.1 Ethyl acrylate samples should be stored in amber bottlesor protected from light by other means to aid in preventingpolymerization. Keep samples away from heat sources andchemicals that can cause free radical polymerization. Ethyl

12、acrylate can polymerize violently evolving considerable heat.Refer to suppliers Material Safety Data Sheet.1This specification is under the jurisdiction of ASTM Committee D01 on Paintand Related Coatings, Materials, and Applications and is the direct responsibility ofSubcommittee D01.35 on Solvents,

13、 Plasticizers, and Chemical Intermediates.Current edition approved June 1, 2009. Published June 2009. Originallyapproved in 1976. Last previous edition approved in 2004 as D 3548 04.2For referenced ASTM standards, visit the ASTM website, www.astm.org, orcontact ASTM Customer Service at serviceastm.o

14、rg. For Annual Book of ASTMStandards volume information, refer to the standards Document Summary page onthe ASTM website.3Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http:/www.dodssp.daps.mil.1*A Summary of Changes se

15、ction appears at the end of this standard.Copyright ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.5. Sampling5.1 The material shall be sampled in accordance withPractice E 300. (See Precaution Section 4.)6. Test Methods6.1 The properties enum

16、erated in this specification shall bedetermined in accordance with the following ASTM methods:6.1.1 PurityTest Method D 3362.6.1.2 WaterTest Method D 1364.6.1.3 ColorTest Method D 1209 (see Note 1).6.1.4 AcidityDetermine the acidity in accordance withTest Method D 1613, except multiply the results o

17、btained “asacetic acid” by 72.06/60.05 or 1.4. This will convert the resultsobtained to “as acrylic acid.” The results obtained “as mg KOHper gram of material” are unaffected.6.1.5 Methyl Ether of Hydroquinone ContentTest MethodD 3125.7. Packaging and Package Marking7.1 Package size shall be agreed

18、upon by the purchaser andthe supplier.7.2 Packaging shall conform to applicable carrier rules andregulations or when specified shall conform to Fed. Spec.PPP-C-2020.8. Keywords8.1 acrylate; ethylSUMMARY OF CHANGESCommittee D01.35 has identified the location of selected changes to this standard since

19、 the last issue(D 3548 04) that may impact the use of this standard. (Approved June 1, 2009.)(1) Added new Note 1 to 3.1.(2) Added Test Method D 5386 to list of Referenced Docu-ments.(3) Referenced new Note 1 in 6.1.3ASTM International takes no position respecting the validity of any patent rights a

20、sserted in connection with any item mentionedin this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the riskof infringement of such rights, are entirely their own responsibility.This standard is subject to revision at any time

21、 by the responsible technical committee and must be reviewed every five years andif not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standardsand should be addressed to ASTM International Headquarters. Your comments will re

22、ceive careful consideration at a meeting of theresponsible technical committee, which you may attend. If you feel that your comments have not received a fair hearing you shouldmake your views known to the ASTM Committee on Standards, at the address shown below.This standard is copyrighted by ASTM In

23、ternational, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the aboveaddress or at 610-832-9585 (phone), 610-832-9555 (fax), or serviceastm.org (e-mail); or through the ASTM website(www.astm.org).D3548092

展开阅读全文
相关资源
猜你喜欢
  • BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf BS PD IEC TS 62763-2013_5284 Pilot function through a control pilot circuit using PWM (pulse width modulation) and a control pilot wire《通过控制导向线使用PWM (脉冲宽度调制) 的导向功能和控制导向线》.pdf
  • BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf BS ISO 8070-2007 Milk and milk products - Determination of calcium sodium potassium and magnesium contents - Atomic absorption spectrometric method《牛奶和奶制品 钙、钠、钾和镁含量的测定 原子吸.pdf
  • BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf BS ISO 8082-1-2009 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - General machines《林业用自推进机械 防倾.pdf
  • BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf BS ISO 8082-2-2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platf.pdf
  • BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf BS ISO 8083-2006 Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements《林业机械 落体防护装置(FOPS) 实验室试验和性能要求》.pdf
  • BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf BS ISO 8086-2004 Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures《乳品厂 卫生条件 检验和取样程序通用指南》.pdf
  • BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf BS ISO 8096-2005 Rubber- or plastics-coated fabrics for water resistant clothing - Specification《雨衣用橡胶或塑料涂覆织物 规范》.pdf
  • BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf BS ISO 8097-2001 Aircraft Minimum airworthiness requirements and test conditions for certified air cargo unit load devices《航空器 经认证的航空货运集装单元装置最低适航性要求和试验条件》.pdf
  • BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf BS ISO 8114-1993 Textile machinery and accessories - Spindles for ring-spinning and doubling machines - List of equivalent terms《纺织机械和附件 环锭纺纱机和并线机用锭子 同义术语表》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > ASTM

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1