DS R 464-1988 Dansk Ingenierforenings-s Recommendation for corrosion protection of steel structures in marine environments《丹麦工程师协会 关于钢结构在海洋条件下应用的防腐建议》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6894-2010 6250 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine《直接喷射式涡轮增压汽车柴油发动机用机油的抗混气性能评价的.pdf

ASTM D6894-2011 1250 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine《评估在直接注射涡轮增压汽车柴油机中发动机油的通气阻力的标.pdf

ASTM D6894-2013 red 3125 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine《评估直喷式涡轮增压汽车柴油发动机中机油透气阻力的.pdf

ASTM D6895-2006 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100&176 C《100℃时重型柴油机排放油的旋转粘度用标准试验方法》.pdf

ASTM D6895-2006(2012) 8125 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100° C《100摄氏度下重型柴油放油孔转动粘性的标准试验方法》.pdf

ASTM D6895-2017 red 2156 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100&x2009 &xb0 C《100℃时重型柴油机排放油的旋转粘度用标准试验方法》.pdf

ASTM D6896-2003(2007) 895 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature《低温下废机油的屈服应力和表观粘度测定的标准试验方法》.pdf

ASTM D6896-2003e1 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature《测定低温下用过的发动机油的屈服应力和表观粘度的标准试验方法》.pdf

ASTM D6896-2012 red 3125 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature《测定低温下使用的发动机油的屈服应力和表观粘度的标准试验方法》.pdf