1、EIA 535ABAE 87 E 323qbOO 007VOqO 8 W a m a v) m v) I W a I DETAIL S P E C I F I CAT I O N Fixed Tantalum Capacitors With Non-Solid Electrolyte And Porous Anode Silver Case, Axial Lead, Elastomeric Seal, Polarized, Nickel Positive, Copper Negative Leads, Insulated EIA-535ABAE MAY 1987 ELECTRONIC INDU
2、STRIES ASSOCIATIQN ENGINEERING DEPARTMENT EIA 535ABAE 87 I 3234b00 007404L T NOTICE EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of prod
3、ucts, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Pub- lications shall not in any respect preclude any member or non-member of EIA from manufacturing or selling products not conforming to such S
4、tandards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than EIA members, whether the standard is to be used either domestically or internationally. Recommended Standards and Publications are adopted by EIA without regard to w
5、hether or not their adoption may involve patents on articles, materials, or processes. By such action, EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Recom- mended Standard or Publication. Pub 1 ished by ELECTRONIC INMJSTRIES
6、 ASSOCIATION Engineering Department 2001 Eye Street, N.W. Washington, D.C. 20006 Copyright 19 8 7 ELECTRONIC INDUSTRIES ASSOCIATION PRICE: $11.00 EIA 535ABAE 87 m 3234600 0074042 L m fi:, INTERNATIONAL ELECTROTECHNICAL Q4lity Assessmetat System for Electronic Componen +,-lo%, (see Table II) (see Tab
7、le III 55/125/21 +85 C (see Table II) ( see Table 11) (see Table II) (see Table II) O (No reversal + ,-20 % of voltage permitted) EIA 535ABAE 87 3234b00 0074046 9 = EIA-535ABAE qc300202 /us 0005 Page 3 16 VOLTS WVDC 85 C (Ur) i0 VOLTS WVDC 125 C (Uc) -o- -.-.-.-.-.-.-.- 9- - 15.0 A O. 057 155 1 2. o
8、 -24 +10.5 + 12 130 33.0 A O. 125 90 1 2.0 -28 *14.0 +16 160 70.0 B O. 131 75 1 4.0 -2 8 +14. O +16 270 120.0 B 0.368 50 1 7. O -28 +17.5 +20 270 170.0 C 0.254 35 2 10.0 -3 2 +14. O + 16 410 270.0 C 0.609 30 2 16.0 -56 *17.5 +20 340 540.0 . D O. 490 23 6 24.0 -80 +25.0 +25 610 - r-.-.-.-.-.-.-.-.-.-
9、.-.-.- EIA 535ABAE 87 3234600 0074047 O EIA-53 5ABAE QC300202/us0oo5 Page 4 EIA 535ABAE 87 3234600 0074048 2 EIA-535ABAE QC300202/USOO05 Page 5 _ EIA 535ABAE 87 H 3234600 0074049 4 EIA- 5 3 5 ABAE QC300202 /USO005 Page 6 10 VOLTS WVDC 85 C (Ur) 6.3 VOLTS WVDC 125 c (OC) EIA 535ABAE 87 m 3234600 007L
10、l050 O = EIA-53 5 AB AF, QC300202/USO005 Page 7 1.4 1.5 RELATED DOCUMENTS Generic Specification: QC300000 (EIA-5350000) Sectional Specification: QC300200 (EIA-535A000) MARKING The marking of the capacitor and the packing shall be in accordance with the requirements of 300200 Sub- clause 1.6. . The f
11、ollowing items are to be marked on the capacitor: a. Rated capacitance in the form “XXXUF“. b. Rated DC voltage in the form “yyyVDC“. - EIA 535ABAE 87 m 3234600 0074051 2 m EIA-535ABm QC300202/usooo5 Page 8 1. ti 1.7 1.8 1.9 c. Polarity identification by one or more positeve signs near the positive.
12、 termination. d,. Tolerance code per IEC Publication 62. The code letter will follow the marking of rated capacitance per item a. or will be on a separate line. e. Date code per IEC Publication 62. . f. Manufacturers name or trade mark. g. Manufacturers type designation (optional). h. Reference deta
13、il specification (optional). ORDERING I NFORNATION Orders for capacitors covered by this specification shall contain, in clear or in coded form, the following minimum in format i on : a. Rated capacitance .- b. Tolerance on rated capacitance. c. iiated d.c. voltage. d. Number and issue reference of
14、the detail specification and style ,reference. CERTIFIED RECORDS OF RELEASED LOTS Required. ADDETIONAL INFORMATION (not for in.spection purposes) 1.8.1 Ripple Current Ratings for ali capacitors are as listed in Table II. 1.8.2 The r-m-s ripple current rating is independent of tempera- ture or freque
15、ncy within the following limitations: 1.8.3 At frequencies of less than 120 Hz, the rated r-m-s ripple current must be multiplied by the factors shown in the following table: Frequency in Hz 25 50 60 1 O0 0.36 0.59 O .65 0.88 1.8.4 The sum of the peak a-c voltage plus the d-c voltage shall not excee
16、d the d-c working voltage of the capacitor. 1.8.5 The sum of the negative peak a-c voltage plus the applied d-c voltage shall not allow a voltage reversal. ADDITIONAL OR INCREASED SEVERITIES OR REQUIREMENTS TO THOSE SPECIFIED IN THE GENERIC AND/OR SECTIONAL SPECIFICATION None. e EIA 535ABAE 87 32346
17、00 0074052 4 w EIA-535ABU QC3Q0202/0005 Page 9 PART TWO - INSPECTION REQUIREz?ENTS 2.1 PROCEDURES 2.l.i For Qualification Approval, the procedures shall be in accordance with the Sectional Specification, (IECQ Publication QC300200, Sub-clause 3.4). 2.1.2 For Quality Conformance Inspection the test s
18、chedule (Table IV) includes sampling, periodicity, severities and requirements. The formation of inspection lots is covered by Sub-clause 3.5.1 of the Sectional .Spec if ica t ion. TABLE IV NOTE 1: NOTE .2: NOTE 3: Clause numbers of tests and performance requirements refer to the Sectional Specifica
19、cion, (IECQ Publication QC300200) and Part One of this specification. Inspection Levels and AQLs are selected from IEC Publication 410. In this table: a I P n C .I D I ND I IL P AQL I periodicity (in months) sample size acceptance criterion (permitted number of de fec t ives 1 des truc t ive non-des
20、tructive inspection level (see IEC Publ. 010) acceptable qualicy level (see IEC Publ. 410) EIA 535ABAE 87 3234600 0074053 b Sub-group B1 0 s-3 2.5% 4.5 Solderability Without aging. Method : Solder Bath Test T, Method 1A EIA-535ABAE QC300202/USO005 Page 10 Good tinning as evidenced by free flowing of
21、 the solder with wetting of the terminations TABLE IV (continued 1 Sub-group A2 4.2.1 4.2.2 4.2.3 4.2.4 Leakage current Capacitance Tangent of loss ang le Impedance (if applicable) N D Protective Recis- tance: 1000 ohms Frequency: 120Hz Frequency : 12 OH2 Not Applicable at 20 C II 1.01 I Table 2 iri
22、thin specified tolerance Table 2 EIA 535ABAE 87 3234600 0074054 B = EIA-535ABAE QC300202/USOOti5 Page 11 4.15 Characteristics at high and low temperatures (if required 1 Phe capacitors shall be measured at each step Step 1: (+20 C) Leakage current Capacitance Tangent of loss angle ;tep 2: Lowe: cate
23、gory t emperatur o (-55 C) Capacitance Tangent of loss angle Impedanco ;tep 3: Rated temperatare (+85 Cl Leakage Capacitance Current 2 Ur Tangent of loss ang 1 e ;tep 4: Upper category temperature (+125 C) Leakage Current 3 Uc Capacitance Tangent or loss angle s-3 2.53 or use as 0- reference I value
24、 - Table 2 trot a?plicabl e Table 1 Table 2 Table 2 Table 2 Table 2 Table 2 Table 2 EIA 535ABAE 87 m 3234b00 0074055 T m EIA-535ABAE QC300202/USO005 Page 12 TABLE IV (continued) Sub-group CM Part of sample of Sub-group C1 4.3.1 Initial measurement 4.3 Robustness of terminations 4.4 Res is tance to s
25、oldering heat 4.4.2 Final measurements D Capacitance Test Ua Force = 10s Special aend Visual Test (4.3.3 Ex min a t ion ZIethod: Solder Batn Test Tb, :lethod 1A (10 +,-ls immer- sion time) Visual Zxamin- ation 6 9 1 !lo visible Samage and no leakage or el oc-,zol*P= _b- . No visiSle amage and no 1ea
26、kag.e of electrolyte LegiSle marking -I Jot more than 1 defective for Subgroups CU and C13 combined- Sub-group CU3 Other parr of sample 4.6.1 Initial measurement 4.6 Rapid change of temperature D Capacitance 9A = Lower category tempera ture (-55 CI category BB - Upper 181 1 EIA 535ABAE 87 = 3234600
27、0074056 II H 8 TABGE IV 4.6.3 Final measurements 4.7 Vibration 4.7.2 Final measurements 4.9 Shock 4.9.2 Final measurements (Sub-group CLB - caneinued) t em-p e r a t u r 1 (+125 Cl 30 cycles Duration t = 30 minu tes Leakage current Capacitance . Tangent of loss angle Nethod of Mounting: see 1.1 of t
28、his spec if ic at ion Procedure 84 Frequency Range LO to 2000Hz Amplitude: 0.75 mm or acreler. ation 20g, whichever Is less severe Total Duration: 6h Visual Examination Method of . Mounting: se 1.1 of this specification Acceleration: 981 m/s/s Duration of pulse: 6 ms Rated Voltage applied Visual exa
29、mination EIA-535ABAE QC3OOZOZ/USOOO5 Page 13 ,= 1.25 times Table 2 (Cf-Ci)/Ci: +,- 10% of value measured in 4.6.1 c,= 1.15 tim,es Table 2 !io visible d mage and no 1-akage of electrolyte JO visible damage and no leakage of electrolyte -_ EIA 535ABAE A? 3234600 0074057 3 - Clause number and Test (see
30、 Note il Sub-group C1 Combined sample of specimens of Sub- groups CU and C1B 4.10 Climatic sequence 4.10.1 Initial measurement 4.10.2 Dry Heat 4.10.3 Damp heat, cyclic, test Db, first cycle 4.10.4 Cold 4.10.5 Low air pressure EIA-53 5ABAE QC300202/USO005 Page 14 o-.I-.-.-?-.?-?.?-.-. D Conditions of
31、 Sample Perf ormance or test (see Note 1) size and requirements ND criterion (see Note i) of accept- ability (see Note 31 o- PI“I = o?.o.oo?o.o D 6 27 1 Capacitance Temperature: Upper category temperature (+125 Cl Duration: 16 h. Visual No visible examination damage and no leakage of electrolyte Sev
32、erity b: 55 C Temperature: Lower category temperature (-55 Cl Duration: 2 h Visual No visible examination damage and no leakage of electrolyte Air Pressure : 8.5 kPa Temperature: 15 to 35 c Duration: 5 min. Last Minute of test: UR TABLE IV (continued) EIA 535ABAE 87 m 3234600 0074058 5 m EIA-535ABAE
33、 QC300202/usooos Page 15 TABLE IV (Sub-group C1B - continued) 4.10.5.3 Intermediate measurement 4.10.6 Damp heat, cyclic, test Db, remaining cycles 4.10.7 Sealing 4.10.8 Final measurements Visual examination Severity b: 55 C 5 cycles , No voltage applied Not applicable Visual examination L-akage cur
34、rent. Capacitance Tangent of loss angle No breakdown , f lash-over or harmful de- formation of the case No visible damage and no leakage of electrolyte Legible marking Teble 2 (Cf-Ci)/Ci: +#- 5% of value measured in 4.10.1 and +#- 8% of value measured in 4.3.1 or 4.6.1 as applicable Table 2 Sub-grou
35、p C2 4.11 Damp heat, 4.11.1 Initial 4.11.2 Final steady state measurement measurements Duration:21 days Capacitance Visual examination Leakage current 69 No visible I damage and no leakage of electrolyte I Legible marking Table 2 EIA 535ABAE 87 3234b00 0074059 7 EIA-535ABAE QC300202/USO005 Page 16 T
36、ABLE IV (Sub-group C2 - continued) C-apac i tanc e Tangent of loss angla insusation resistance of the external insulation Voltage proof of the external insulation (Cf-Ci)/Ci: +f. 5% of value measured in 4.11.1 1.15 times Table 2 100M ohms No breakdown or f 1 ashover Subgroup C3 4.12 Endurance 4.12.1
37、 Initial measurement 4.12.3 Final measurements 3 Duration: 2000 l- 12 units at +125 C, Uc 12 units at *85 Cf Ur Recovery: 16 h Capacitance Visual examination Leakage current Capacitance Tangent of loss angle 3 24 1 Reference Value No visible Legible marking damage Table 2 (Cf-Cil/Ci: 10% of value me
38、asured in 4.12.1 Table 2 EIA 535ABAE 87 W 3234600 0074060 3 W Clause number and Test (See Note 1) EIA-535ABAE QC300202/USO005 Page 17 TABLE IV (continued) D or ND Conditions of test (see Note 1) Sample size and criterion of accept- abil i ty (see . . Note 3) -o- P In I = Performance requirements (se
39、e Note 1) Sub-group C4A 4.13 Surge 4.13.1 Initial measur emen t: 4.13.3 Final measurements Number of cycles: 1000 iunits at: 125 C 3 units at 85 C P ro tec t ive resistor: fOOC ohms +t-LO% Duration of charge: 30 s Duration of dis- charge: 5 min 30 s Capacitance Leakage current Capacitance Tangent of
40、 loss Visual angle examination - Not more than 1 defective for Subgroups L2 6 1 Reference Value Table 2 (Cf-Ci) /Ci: Cl = 10% of value measured in 4.13.1 ,= 1.3 times Table 2 No visible damage and no leakage of electrolyte C4A and C4B combined-.- E 68-5 3 5 AB BE QC300202/US0005 Page 18 D or ND Clause number and Test (see Note 11 Conditions of test (see Note 1) Sample size and criterion of accept- abil i ty (see Note 3) - Plnt Perf ormance requirements (see Note 11 _- tbt more than 1 defective for. Subgroups C4A and C4B combined- Sub-group C4B ID I 11216 I 1 I
