1、 Electronic Components Industry Association EIA Standards & Technology Department 2214 Rock Hill Road, Suite 265 * Herndon, VA 20170 * tel 571-323-0294 * fax 571-323-0245 www.ecianow.org September 7, 2017 ERRATA TO: Recipients of ANSI/EIA-296-F-2015 “Lead Taping of Components in Axial Lead Configura
2、tion for Automatic Handling” NOTE: ANSI/EIA-296-F-2015 “Lead Taping of Components in Axial Lead Configuration for Automatic Handling” was approved March 27, 2015. The ECIA Automated Components Handling Committee has refined the conversion from Metric to Imperial/English dimensional units in Table 1
3、on page 4 Dimension “B” (Inside Tape Spacing). The correct table is displayed in the attached replacement page. ERRATA SHEET TO EIA-296-F (Approved March 27, 2015) This Errata Sheet has been prepared to provide a refined conversion from Metric to Imperial/English dimensional units in Table 1 on page
4、 4. Please remove page 4 from your document and replace it with the attached page. EIA-296-F Page 4 DESCRIPTIONNOTATIONFIGURE12653637393100(1.024)(2.087)*(2.480)*(2.874)*(3.661)(3.937)+1.5(+0.059)+2(+0.079)-0-1(-0.039)CleanLeadtoCleanLeadEccentricityL1-L21.0Max(0.039)CumulativePitch10 ConsecutiveCom
5、ponentsPLeadExtensionL3AToleranceLeadBendingMExposed AdhesiveSTapeWidthTLeadSandwichHOveralWidthW*Formerly recognizedasClassI,IIandIIIrespectively.Dualdimensionsdepictedthus: millimeter(inch)ComponentPitch “A“isNominalDIMENSIONSTABLE IBInsideTapeSpacing(SeeParagraph 5.8)B ToleranceT/2 Min.REF:123.5(4.862)Max. (SeeParagraph6.4)1.4 Max (0.055)2(0.079)2(0.079)2(0.079)1.5 (0.059)0.8 (0.031)Max(Zeroispreferred)5(0.197)10(0.394)15(0.591)20 (0.787)SeeParagraph 5.1“A“ 0.5 (0.020)SeeParagraph5.100.8(0.031)Max.SeeParagraph 5.410X“A“(Nominal)2(0.079)EIA-296-F-2015 Errata dated May XX, 2017
