1、 EIA STANDARD TP-60A General Methods for Testing of Contact Finishes for Electrical Connectors and Sockets EIA/ECA-364-60A (Revision of EIA-364-60) February 2008 ANSI/EIA-364-60A-2008(R2014) Approved: February 29, 2008 Reaffirmed: August 28, 2014 EIA/ECA-364-60A NOTICEEIA Engineering Standards and P
2、ublications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particul
3、ar need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of ECIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by
4、 those other than ECIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by ECIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, ECIA does not assume any liability to any paten
5、t owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This EIA Standard is considered to have International Standardization implication, but the International Electrotechnical Commission activity has not progressed to the point where a valid comparison
6、between the EIA Standard and the IEC document can be made. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and t
7、o determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 5326.03, formulated under the cognizance of the CE-2.0 Committee on EIA National Connector and Socket Standards).Published by Electronic Components Industry Association 2014 Engineering Department 22
8、14 Rock Hill Road, Suite 265 Herndon, VA 20170 PLEASE!DONT VIOLATE THELAW!This document is copyrighted by the ECIA and may not be reproduced without permission. Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: IHS15 Inverness Way East Englewood, CO 80112-5704 or call USA and Canada (1-877-413-5184), International (303-397-7956)
