EN 12095-1997 en Plastics Piping Systems - Brackets for Rainwater Piping Systems - Test Method for Bracket Strength《塑料管道系统 雨水管道系统用支架 支架强度的检验方法》.pdf

相关资源

JIS K7034-2003 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在偏移条件下内截面耐化学侵蚀的测定.pdf

JIS K7039-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下长期最终弯曲应力的测定和长期最终相应环偏移度的计算.pdf

JIS K7042-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.粘合的或绕接的钢性接头设计的检定试验方法.pdf

JIS K7035-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下蠕变因子的测定和长期特定环硬度的计算.pdf

JIS K7031 2003 塑料管道系统.玻璃增强热塑(GRP)管道和配件.在短期内压下管壁的渗透密封性验证试验方法.pdf

GA 304-2012 塑料管道阻火圈.pdf

CJJ T 29-2010 建筑排水塑料管道工程技术规程.pdf

YD 5025-1996 长途通信光缆塑料管道工程设计暂行技术规定.pdf

CJJ T 29-2010 建筑排水塑料管道工程技术规程.pdf

QB T 2568-2002 硬聚氯乙烯（PVC-U）塑料管道系统用溶剂型胶粘剂.pdf

猜你喜欢

DIN EN ISO 13769-2009 Gas cylinders - Stamp marking (ISO 13769 2007) English version of DIN EN ISO 13769 2009-07《气瓶 钢印标记(ISO 13769 2007) 英文版本DIN EN ISO 13769 2009-07》.pdf

DIN EN ISO 13783-1998 Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints - Test method for leaktightness and strength while 1.pdf

DIN EN ISO 13787-2003 Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787 2003) German versi.pdf

DIN EN ISO 13788-2013 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial conde.pdf

DIN EN ISO 13793-2001 Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793 2001) German version EN ISO 13793 2001《建筑物热性能 避免霜冻的地基热设计》.pdf

DIN EN ISO 13802-2016 Plastics - Verification of pendulum impact-testing machines - Charpy Izod and tensile impact-testing (ISO 13802 2015 Corrected version 2016-04-01) German vers.pdf

DIN EN ISO 13803-2015 Paints and varnishes - Determination of haze on paint films at 20 (ISO 13803 2014) German version EN ISO 13803 2014《色漆和清漆 20漆膜光泽度的测定》.pdf

DIN EN ISO 13805-2009 Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (I.pdf

DIN EN ISO 13807-2009 Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807 199.pdf