1、BSI Standards PublicationBS EN 12217:2015Doors Operating forces Requirements and classificationBS EN 12217:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 12217:2015. Itsupersedes BS EN 12217:2003 which is withdrawn.The UK participation in its preparation w
2、as entrusted to TechnicalCommittee B/538, Doors, windows, shutters, hardware and curtainwalling.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsib
3、le for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 87437 6ICS 91.060.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Poli
4、cy and Strategy Committee on 31 July 2015.Amendments issued since publicationDate Text affectedBS EN 12217:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12217 April 2015 ICS 91.060.50 Supersedes EN 12217:2003English Version Doors - Operating forces - Requirements and classification Portes
5、 - Forces de manoeuvre - Prescriptions et classification Tren - Bedienungskrfte - Anforderungen und Klassifizierung This European Standard was approved by CEN on 12 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu
6、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versi
7、ons (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria,
8、Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw
9、itzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN nati
10、onal Members. Ref. No. EN 12217:2015 EBS EN 12217:2015EN 12217:2015 (E) 2 Contents Page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Classification 4 5 Use of historical data 5 Bibliography 6 BS EN 12217:2015EN 12217:2015 (E) 3 Foreword This document (EN 12217:2015) has
11、 been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the
12、latest by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or a
13、ll such patent rights. This document supersedes EN 12217:2003. Compared with EN 12217:2003, the following changes have been made: a) Terms and definitions have been revised; b) clarification on how the final total classification is obtained from different results; c) one new class 5 has been added i
14、n Table 1; d) a new Clause 5 “use of historical data” has been added. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark
15、, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12217:2015E
16、N 12217:2015 (E) 4 1 Scope This European Standard is applicable to hinged/pivoted and sliding doorsets with latches, for pedestrian use. It defines the classification of the test results for the forces and/or torques to open/close doors and to engage/release and lock/unlock the building hardware usi
17、ng a key or handle, after testing in accordance with EN 12046-2. It is only applicable to the manual operation of doorsets. The classification of forces for doorsets with self-closing devices engaged is excluded from this test method. It is also not applicable to doorsets with special hardware, e.g.
18、 emergency exit devices. The tests are applicable to doorsets of any material. The operation of some glazed doors (door high windows) involves hardware with latches and may be classified in accordance with this European Standard. 2 Normative references The following documents, in whole or in part, a
19、re normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12046-2:2000, Operating forces Test method Part 2:
20、Doors EN 12519, Windows and pedestrian doors Terminology 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 12519 and the following apply. 3.1 doorset complete unit consisting of the door frame and the door leaf or leaves supplied, with the essential bui
21、lding hardware and seals 3.2 hand operated building hardware building hardware operated by means of a hook grip made with the fingers in an active role and the thumb in a passive role; the proximal and distal interphalangeal joints are flexed around the handle Note 1 to entry: See EN 1005-1:2001+A1:
22、2008, 3.7.2. 3.3 finger operated hardware hardware operated by means of a grip made with the thumb and the forefinger Note 1 to entry: See EN 1005-1:2001+A1:2008, 3.7.1. 4 Classification When tested in accordance with EN 12046-2, a doorset shall be classified in accordance with Table 1. The final to
23、tal class of operating forces/torques of doors results from lowest class obtained among the particular tested forces or torques. BS EN 12217:2015EN 12217:2015 (E) 5 Table 1 Classification of operating forces and torques Resistance to: Class 0 Class 1 Class 2 Class 3 Class 4 Class 5 Closing force or
24、force to commence motion, maximum value (N) a75 50 25 10 50 Hand operated building hardware b Maximum torque (Nm) 10 5 2,5 1 5 Maximum force (N) 100 50 25 10 50 Finger operated building hardware b Maximum torque (Nm) 5 2,5 1,5 1 1,5 Maximum force (N) 20 10 6 4 6 aNo requirements. bThe higher measure
25、d value of force or torque according to EN 12046-2 determines the class. NOTE For the higher operating forces in Classes 1 and 2, the suitability of the hardware (e.g. keys, locks, lock cylinder, handles) needs to be ensured. 5 Use of historical data Results of already performed tests according to E
26、N 12046-2:2000 may be used for classification. Classifications according to EN 12217:2003 resulting in Classes 0 to 4 need not be reclassified according to this European Standard. BS EN 12217:2015EN 12217:2015 (E) 6 Bibliography 1 EN 1005-1:2001+A1:2008, Safety of machinery Human physical performanc
27、e Part 1: Terms and definitions This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are publ
28、ished by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.T
29、he knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowle
30、dge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and internatio
31、nal standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to m
32、ake using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll alwa
33、ys be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will auto
34、matically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences
35、can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the qual
36、ity of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are th
37、e property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Pat
38、ents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
