EN 13146-10-2017 en Railway applications - Track - Test methods for fastening systems - Part 10 Proof load test for pull-out resistance《铁路设施-轨道-紧固系统的试验方法-第10部分 抗拔荷载试验》.pdf

上传人:李朗 文档编号:707329 上传时间:2019-01-03 格式:PDF 页数:12 大小:1.67MB
下载 相关 举报
EN 13146-10-2017 en Railway applications - Track - Test methods for fastening systems - Part 10 Proof load test for pull-out resistance《铁路设施-轨道-紧固系统的试验方法-第10部分 抗拔荷载试验》.pdf_第1页
第1页 / 共12页
EN 13146-10-2017 en Railway applications - Track - Test methods for fastening systems - Part 10 Proof load test for pull-out resistance《铁路设施-轨道-紧固系统的试验方法-第10部分 抗拔荷载试验》.pdf_第2页
第2页 / 共12页
EN 13146-10-2017 en Railway applications - Track - Test methods for fastening systems - Part 10 Proof load test for pull-out resistance《铁路设施-轨道-紧固系统的试验方法-第10部分 抗拔荷载试验》.pdf_第3页
第3页 / 共12页
EN 13146-10-2017 en Railway applications - Track - Test methods for fastening systems - Part 10 Proof load test for pull-out resistance《铁路设施-轨道-紧固系统的试验方法-第10部分 抗拔荷载试验》.pdf_第4页
第4页 / 共12页
EN 13146-10-2017 en Railway applications - Track - Test methods for fastening systems - Part 10 Proof load test for pull-out resistance《铁路设施-轨道-紧固系统的试验方法-第10部分 抗拔荷载试验》.pdf_第5页
第5页 / 共12页
点击查看更多>>
资源描述

1、BS EN 13146-10:2017Railway applications Track Test methods for fastening systemsPart 10: Proof load test for pull-out r e s i s t a n c eBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13146-10:2017 BRITISH STANDARDNational forewordThis British Standard is the

2、UK implementation of EN 13146-10:2017. The UK participation in its preparation was entrusted to TechnicalCommittee RAE/2, Railway Applications - Track.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all th

3、e necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 87226 6 ICS 93.100 Compliance with a British Standard cannot confer immunity from legal obligations.This British Stand

4、ard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 13146-10:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13146-10 January 2017 ICS 93.100 English Version R

5、ailway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance Applications ferroviaires - Voie - Mthodes dessai pour les systmes de fixation - Partie 10 : Essai de charge dpreuve pour la rsistance larrachement Bahnanwendungen - Oberbau - Prfverfa

6、hren fr Schienenbefestigungssysteme - Teil 10: Belastungsprfung fr den Auszugswiderstand This European Standard was approved by CEN on 19 November 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the stat

7、us of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, Ge

8、rman). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croat

9、ia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turke

10、y and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Re

11、f. No. EN 13146-10:2017 EBS EN 13146-10:2017EN 13146-10:2017 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Principle . 4 5 Apparatus . 4 5.1 Actuator 4 5.2 Force measuring instruments 4 6 Test specimens . 5 6.1 Rail support . 5 6.2 Fasteni

12、ng components 5 7 Procedure. 6 7.1 Preparation for test 6 7.2 Loading and measurement of force 6 7.3 Inspection 6 8 Test report . 7 Bibliography 8 BS EN 13146-10:2017EN 13146-10:2017 (E) 3 European foreword This document (EN 13146-10:2017) has been prepared by Technical Committee CEN/TC 256 “Railway

13、 applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2017 and conflicting national standards shall be withdrawn at the latest by July 2017.

14、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commissi

15、on and the European Free Trade Association. This European Standard is one of the series EN 13146 “Railway applications Track Test methods for fastening systems” which consists of the following parts: Part 1: Determination of longitudinal rail restraint Part 2: Determination of torsional resistance P

16、art 3: Determination of attenuation of impact loads Part 4: Effect of repeated loading Part 5: Determination of electrical resistance Part 6: Effect of severe environmental conditions Part 7: Determination of clamping force Part 8: In-service testing Part 9: Determination of stiffness Part 10: Proof

17、 load test for pull-out resistance According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

18、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13146-10:2017EN 13146-10:2017 (E) 4 1

19、Scope This European Standard specifies a test procedure to confirm that the force necessary to pull the anchorage of a rail fastening assembly out of the sleeper or other supporting element is greater than a prescribed value (i.e. it is a proof load test). This test is for components of the fastenin

20、g system which are: a) cast into concrete during the manufacture of sleepers or other supporting elements; b) glued into the cast or drilled holes in concrete; or c) screwed or otherwise attached to wood, plastic or steel sleepers or other supporting elements. This test is not applicable to embedded

21、 rails. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including a

22、ny amendments) applies. EN 13481-1, Railway applications Track Performance requirements for fastening systems Part 1: Definitions EN ISO 7500-1, Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verificati

23、on of the force-measuring system (ISO 7500-1) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13481-1 apply. 4 Principle A vertical upward force is applied to the anchored fastening element, directly above the point at which it is cast, glued or screw

24、ed into its support. The load is increased until the prescribed proof load is reached. There should be no evidence of any damage which might reduce the strength or durability of the fastening system. NOTE For general applications, values of proof load are given in EN 134812 (for concrete sleepers) a

25、nd EN 134815 (for slab tracks). 5 Apparatus 5.1 Actuator An actuator capable of applying an upward force of at least 75 kN to the component of the fastening system which is attached to the sleeper or supporting element. A linkage shall be provided between the actuator and the fastening component whi

26、ch ensures that the vertical force is applied directly above the part of the component which is anchored to the sleeper or support without applying unrepresentative flexural or torsional moments to any component. 5.2 Force measuring instruments Force measuring instruments conforming to EN ISO 7500-1

27、 class 2 over the required range of force. BS EN 13146-10:2017EN 13146-10:2017 (E) 5 6 Test specimens 6.1 Rail support For sleepers or bearers, the test specimen shall consist of a sleeper or half sleeper (or bearer) with cast-in or glued-in fastening components or holes and rail seats as made witho

28、ut modification for this test. For applications in non-ballasted track where sleepers are not used, a representative section of the support (e.g. a concrete block) shall be used which has a depth equal to the depth of the proposed supporting element or equal to the embedded length of the insert plus

29、 15 mm, whichever is less. In plan view, the support used in the test may be of any shape but it shall extend at least 150 mm from the centre line of the insert in all directions. If a concrete block is used, it shall have a cube strength not greater than the cube strength of the concrete specified

30、for application in the track and it shall not contain steel reinforcing elements close to the fastening unless they are present in the application in the track. If it does contain steel reinforcing, there shall be at least 15 mm of concrete covering the steel. 6.2 Fastening components The test speci

31、men shall consist of a fastening component which is anchored to the sleeper or support as made and without modification for the test. For inserts intended to receive a screw, the load shall be applied to the insert through a screw from the fastening system, inserted to the design depth. For fastenin

32、g systems in which the design depth varies according to the amount of height adjustment used, the test shall be carried out in the adjustment condition which gives the smallest embedded length. For cast-in components intended to house a clip, the load shall be applied through the feature that retain

33、s the clip. It is not necessary to assemble any other elements of the rail fastening system for this test. BS EN 13146-10:2017EN 13146-10:2017 (E) 6 Dimensions in millimetres Key 1 load centre line 2 support for load 3 fastening inserts 4 layer of suitable conformable material (e.g. plywood or low d

34、ensity polyethylene (LDPE) Figure 1 Test arrangement 7 Procedure 7.1 Preparation for test Ensure that the sleeper, bearer or supporting element is supported in a stable manner on a generally level surface and assemble the loading mechanism on top of it. 7.2 Loading and measurement of force The loadi

35、ng arrangement is shown in Figure 1. The distance between the line of action of the applied force and the inner edge of the supports shall be (100 5) mm. If the load support coincides with a projecting insert position, the support shall be modified to bear the load symmetrically each side of the ins

36、ert and retain the (100 5) mm dimension. The load shall be applied to the fastening insert at a rate of (50 10) kN/min until the prescribed proof load is reached. The load shall be maintained for 3 min and then removed without shock. In general, the load shall be applied normal to the rail seat. If

37、the insert is inclined, the load may be applied parallel to its longitudinal axis. 7.3 Inspection After the test, the sleeper or supporting element shall be inspected to determine whether there is any evidence of damage to the fastening component or the sleeper or supporting element that could resul

38、t in a loss of integrity or durability of the system. BS EN 13146-10:2017EN 13146-10:2017 (E) 7 8 Test report The test report shall include at least the following information: a) number, title and date of issue of this European Standard; b) name and address of the laboratory performing the test; c)

39、date when test performed; d) description of the test specimens. For attachments to concrete, this description shall include a statement of whether the insert is cast-in or glued-in; e) origin of test specimens; f) maximum applied load; g) result of visual inspection after test. BS EN 13146-10:2017EN

40、 13146-10:2017 (E) 8 Bibliography 1 EN 13481-2, Railway applications Track Performance requirements for fastening systems Part 2: Fastening systems for concrete sleepers 2 EN 13481-5, Railway applications Track Performance requirements for fastening systems Part 5: Fastening systems for slab track w

41、ith rail on the surface or rail embedded in a channel This page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardiza

42、tion products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards

43、has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to suc

44、ceed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at

45、where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the pr

46、operty of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or

47、disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A

48、British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy

49、 may be printed for personal or internal company use only.Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save money by choosing a subs

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1