1、BRITISH STANDARD BS EN 13286-51:2004 Unbound and hydraulically bound mixtures Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction The European Standard EN 13286-51:2004 has the status of a British Standard ICS 93.080.20 BS EN 13286-
2、51:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 21 January 2005 BSI 21 January 2005 ISBN 0 580 45301 4 National foreword This British Standard is the official English language version of EN 13286-51:2004. The UK participation in its p
3、reparation was entrusted by Technical Committee B/510, Road materials, to Subcommittee B/510/4, Cementitous bound materials, unbound granular materials, waste materials and marginal materials, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained o
4、n request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the
5、 BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enqu
6、irers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This doc
7、ument comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments EUROPEAN STANDARD
8、NORME EUROPENNE EUROPISCHE NORM EN 13286-51 December 2004 ICS 93.080.20 English version Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction Mlanges traits et mlanges non traits aux liants h
9、ydrauliques - Partie 51: Mthode de confection par compactage au marteau vibrant des prouvettes de matriaux traits aux liants hydrauliques Ungebundene und hydraulisch gebundene Gemische - Teil 51: Verfahren zur Herstellung von Probekrpern von hydraulisch gebundenen Gemischen durch Verdichtung mit Vib
10、rationshammer This European Standard was approved by CEN on 12 November 2004. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
11、iographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility o
12、f a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
13、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels
14、2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13286-51:2004: EEN 13286-51:2004 (E) 2 Contents Page Foreword3 1 Scope 5 2 Normative references 5 3 Terms and definitions .5 4 Principle5 5 Dimensions of the specimens5 6 Apparat
15、us .6 7 Procedure .6 8 Storage7 9 Test report 7 EN 13286-51:2004 (E) 3 Foreword This document (EN 13286-51:2004) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, eit
16、her by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. This document is one of a series of documents as listed below. EN 13286-1, Unbound and hydraulically bound mixtures Part 1: Test me
17、thods for laboratory reference density and water content Introduction, general requirements and sampling EN 13286-2, Unbound and hydraulically bound mixtures Part 2: Test methods for the determination of the laboratory reference density and water content Proctor compaction EN 13286-3, Unbound and hy
18、draulically bound mixtures Part 3: Test methods for laboratory reference density and water content Vibrocompression with controlled parameters EN 13286-4, Unbound and hydraulically bound mixtures Part 4: Test methods for laboratory reference density and water content Vibrating hammer EN 13286-5, Unb
19、ound and hydraulically bound mixtures Part 5: Test methods for laboratory reference density and water content Vibrating table EN 13286-7, Unbound and hydraulically bound mixtures Part 7: Cyclic load triaxial test for unbound mixtures EN 13286-40, Unbound and hydraulically bound mixtures Part 40: Tes
20、t method for the determination of the direct tensile strength of hydraulically bound mixtures EN 13286-41, Unbound and hydraulically bound mixtures Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures EN 13286-42, Unbound and hydraulically bound mixt
21、ures Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures EN 13286-43, Unbound and hydraulically bound mixtures Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures EN 13286-44, Unbound and hydr
22、aulically bound mixtures Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag EN 13286-45, Unbound and hydraulically bound mixtures Part 45: Test method for the determination of the workability period of hydraulically bound mixtures EN 13286-46, Unbound
23、 and hydraulically bound mixtures Part 46: Test method for the determination of the moisture condition value EN 13286-47, Unbound and hydraulically bound mixtures Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling EN 13286-51:2004 (E)
24、4 prEN 13286-48, Unbound and hydraulically bound mixtures Part 48: Test method for the determination of degree of pulverisation EN 13286-49, Unbound and hydraulically bound mixtures Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder EN 13286-50, Unbound and hydraulic
25、ally bound mixtures Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction EN 13286-51, Unbound and hydraulically bound mixtures Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures
26、using vibrating hammer compaction EN 13286-52, Unbound and hydraulically bound mixtures Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression EN 13286-53, Unbound and hydraulically bound mixtures Part 53: Methods for the manufacture of test spec
27、imens of hydraulically bound mixtures using axial compression According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
28、 Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13286-51:2004 (E) 5 1 Scope This document specifies test methods for making cylindrical or cubical sp
29、ecimens of hydraulically bound mixtures compacted to refusal density using a vibrating hammer. This document applies to mixtures, or that part of a mixture, containing aggregate up to a maximum size of 31,5 mm. 2 Normative references The following referenced documents are indispensable for the appli
30、cation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 933-2, Tests for geometrical properties of aggregates Part 2: Determination of particle size distribution Test s
31、ieves, nominal size of apertures EN 12390-1, Testing hardened concrete Part 1: Shape, dimensions and other requirements for specimens and moulds EN 13286-4:2003, Unbound and hydraulically bound mixtures Part 4: Test method for laboratory reference density and water content Vibrating hammer 3 Terms a
32、nd definitions For the purposes of this document, the terms and definitions given in EN 13286-4:2003 and the following apply. 3.1 vibrating hammer compaction to refusal method of manufacture of a laboratory test specimen by compacting in layers an undefined quantity of mixture into a mould of known
33、volume using a vibrating hammer and tamper until no further compaction is possible (refusal) 4 Principle Cylindrical or cubical specimens of the mixture are made by vibrating hammer compaction to refusal. After compaction, the specimens are stored at a specified temperature and for a specified perio
34、d of time minimizing loss of moisture until required for testing. 5 Dimensions of the specimens Specimens shall conform to the dimensions given in Table 1. EN 13286-51:2004 (E) 6 Table 1 Nominal specimen dimensions for cubes and cylinders Column 1 2 3 Specimen diameter or cube dimension, d Specimen
35、height, h Maximum size of particle permitted in the specimen Line mm mm mm 1 100 100 22,4 2 150 150 31,5 6 Apparatus 6.1 Cylindrical specimens 6.1.1 Moulds, whose dimensions conform to the specimen requirements in Table 1. The moulds shall be strong enough to prevent distortion during compaction and
36、 shall be capable of being held rigidly in place with their base-plates during compaction. NOTE Either metal, split or plastic moulds can be employed. Plastic moulds have been found to be particularly convenient for slow setting mixtures since the specimen can be left in the mould until the time of
37、test. Reusable or disposable plastic moulds are also suitable for mixtures that need to be contained during storage that would otherwise disintegrate on extrusion from the mould immediately after compaction. Plastic moulds are also more suitable for mixtures that are corrosive to metal. 6.1.2 Vibrat
38、ing hammer, electric or pneumatic, conforming to EN 13286-4. 6.1.3 Steel circular tampers, with nominal diameters of 0,6 d and 0,95 d. 6.2 Cubical specimens 6.2.1 Moulds, whose dimensions conform to the specimen requirements in Table 1 and which conform to EN 12390-1. 6.2.2 Vibrating hammer, electri
39、c or pneumatic, conforming to EN 13286-4. 6.2.3 Steel square tampers, with nominal dimensions 0,6 d and 0,95 d. 6.3 Sieves 22,4 mm and 31,5 mm test sieves conforming to EN 933-2. 6.4 Straight edge Steel straight edge with length equal to or greater than twice the maximum internal mould diameter or w
40、idth as applicable. 7 Procedure 7.1 Sieve the mixture on the 22,4 mm sieve for 100 mm specimens or on the 31,5 mm sieve for 150 mm specimens and use only the fraction passing the appropriate sieve for the manufacture of the specimens. EN 13286-51:2004 (E) 7 7.2 In the case of specimens that will not
41、 be extruded from the mould immediately after compaction, determine the mass of the mould to the nearest 5 g. 7.3 Using the tamper with dimension 0,6 d fitted to the vibrating hammer, compact the mixture into the mould in approximately 50 mm layers until it is deemed that no further compaction is po
42、ssible (1 min per layer is usually sufficient). Before the next layer is added, scarify the previously compacted layer. 7.4 On completion of compaction of the final layer, strike off excess mixture with a straight edge and fill any depressions with fine mixture from the sample using a combination of
43、 the vibrating hammer fitted with the tamper of dimension 0,95 d and trowel. NOTE In order to produce a specimen with sound parallel top and bottom faces, it may be necessary to cap the specimen. It may be convenient to carry this out at this stage. 7.5 For cylindrical specimens, proceed as follows
44、or as in 7.6. Carefully extract or extrude the specimen from the mould. With extrusion, the speed of this operation shall not exceed 2 mm/s. Determine immediately the mass of the specimen to the nearest 5 g and then store as in Clause 8. 7.6 For cylindrical specimens that are to be kept in their mou
45、lds during storage, determine immediately the mass of the specimen and mould to the nearest 5 g and by difference, the mass of the specimen. Then store as in Clause 8. 7.7 For cubical specimens, determine immediately the mass of the specimen and mould to the nearest 5 g and by difference, the mass o
46、f the specimen. Cover the specimen to prevent moisture loss and maintain at a temperature within 5 C of the specified temperature until demoulding takes place. Then store as in Clause 8. 7.8 Using the nominal dimensions of the mould and the mass of the specimen, determine the wet density of the spec
47、imen. 8 Storage Specimens shall be stored vertically, preventing loss of moisture, at a temperature within 2 C of the specified temperature, for the time specified in the relevant mixture document. In the case of specimens stored in their moulds, carefully extrude the specimen just prior to testing.
48、 The speed of this operation shall not exceed 2 mm/s. 9 Test report The test report shall include the following information: a) reference to this document; b) type of mixture; c) origin of the mixture; EN 13286-51:2004 (E) 8 d) any preparation of the mixture where applicable; e) percentage by mass o
49、f mixture retained on the sieve if any; f) mass and nominal wet density of the specimen immediately after compaction; g) storage conditions of the specimen; h) any deviations from this document as well as any incidents that could have an effect on the result. blankBS EN 13286-51:2004 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing Bri
