1、Metallic industrial pipingPart 2: MaterialsBS EN 13480-2:2012+A1:2013BS EN 13480-2:2012+A2:2016Incorporating corrigendum October 2015BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13480-2:2012+A2:2016 BRITISH STANDARDNational forewordThis British Standard is t
2、he UK implementation of EN 13480-2:2012+A2:2016. It supersedes BS EN 13480-2:2012+A1:2013which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PVE/10, Piping systems.A list of organizations represented on this committee can be obtained on request to its secr
3、etary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 90301 4ICS 23.040.01Compliance with a British Standard canno
4、t confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2012.Amendments/corrigenda issued since publicationDate Text affected31 January 2014 Implementation of CEN amendment A1:2013, issued as CEN corre
5、ction notice. See EN foreword for details31 October 2015 Corrected version issued by CEN, see EN foreword for details31 Octobe r 2016Corrected version issued by CEN, see EN foreword for details.Implementation of CEN amendment A2:2016.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13480-2 June
6、2012 ICS 23.040.01 Supersedes EN 13480-2:2002English Version Metallic industrial piping - Part 2: Materials Tuyauteries industrielles mtalliques - Partie 2: Matriaux Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe This European Standard was approved by CEN on 8 May 2012. CEN members are
7、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th
8、e CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cent
9、re has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw
10、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in a
11、ny form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13480-2:2012: EIssue 5 (2016-07) Foreword This document (EN 13480-2:2012) has been prepared by Technical Committee CEN/TC 267 “Industrial piping and pipelines”, the secretariat of which is held by AFNOR. This European
12、Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2012, and conflicting national standards shall be withdrawn at the latest by December 2012. Attention is drawn to the possibility that some of the elemen
13、ts of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essen
14、tial requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard EN 13480 for metallic industrial piping consists of eight interdependent and not dissociable Parts which are: Part 1: General; Par
15、t 2: Materials; Part 3: Design and calculation; Part 4: Fabrication and installation; Part 5: Inspection and testing; Part 6: Additional requirements for buried piping; CEN/TR 13480-7 : Guidance on the use of conformity assessment procedures; Part 8: Additional requirements for aluminium and alumini
16、um alloy piping. Although these Parts may be obtained separately, it should be recognised that the Parts are interdependent. As such the manufacture of metallic industrial piping requires the application of all the relevant Parts in order for the requirements of the Standard to be satisfactorily ful
17、filled. This European Standard will be maintained by a Maintenance MHD working group whose scope of working is limited to corrections and interpretations related to EN 13480. The contact to submit queries can be found at http:/www.unm.fr (en13480unm.fr). A form for submitting questions can be downlo
18、aded from the link to the MHD website. After subject experts have agreed an answer, the answer will be communicated to the questioner. Corrected pages will be given specific issue number and issued by CEN according to CEN Rules. Interpretation sheets will be posted on the website of the MHD. BS EN 1
19、3480-2:2012+A2:20162 EN 13480-2:2012+A2:2016 (E)Issue 5 (2016-07) This document supersedes EN 13480-2:2002+A1:2010+A2:2010. This new edition incorporates the Amendments/the corrigenda which have been approved previously by CEN members, the corrected pages up to Issue 17 without any further technical
20、 change. Annex Y provides details of significant technical changes between this European Standard and the previous edition. Amendments to this new edition may be issued from time to time and then used immediately as alternatives to rules contained herein. It is intended to deliver a new Issue of EN
21、13480:2012 each year, consolidating these Amendments and including other identified corrections. Issue 5 (2016-07) includes the corrected pages listed in Annex Y. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement
22、 this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slo
23、vakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13480-2:2012+A2:20163 EN 13480-2:2012+A2:2016 (E)Issue 5 (2016-07) Contents Page Foreword 2 1 Scope 5 2 Normative references 5 3 Terms and definitions, symbols and units 8 3.1 Terms and definitions .8 3.2 Symbols and u
24、nits .9 4 Requirements for materials to be used for pressure containing parts in industrial piping 10 4.1 General 10 4.2 Special provisions .12 4.3 Technical delivery conditions 14 4.4 Marking .15 5 Requirements for materials to be used for non-pressure parts .15 Annex A (normative) Grouping system
25、for steels for pressure equipment 16 Annex B (normative) Requirements for prevention of brittle fracture at low temperatures 18 B.1 General 18 B.2 Material selection and impact energy requirements 19 B.2.1 General 19 B.2.2 Method 1 Code of practice .19 B.2.3 Method 2 .28 B.2.4 Method 3 Fracture mech
26、anics analysis 40 B.3 General test requirements 41 B.3.1 General 41 B.3.2 Sub-sized specimens 42 B.4 Welds 43 B.4.1 General 43 B.4.2 Welding procedure qualification 43 B.4.3 Production test plates .43 B.5 Materials for use at elevated temperatures .43 B.5.1 General 43 B.5.2 Materials .43 B.5.3 Weldi
27、ng procedure qualification and production test plates 44 B.5.4 Start up and shut down procedure 44 B.5.5 Pressure test 44 Annex C (normative) Provisional technical delivery conditions for clad products for pressure purposes .52 C.1 Introduction 52 C.2 Requirements for the base material.52 C.3 Requir
28、ements for the cladding material 52 C.4 Qualification of the cladding procedure 53 C.5 Production tests .54 Annex D (informative) European steels for pressure purposes .56 D.1 European Standards for steels and steel components for pressure purposes 56 D.2 European standardised steels grouped accordi
29、ng to product forms 57 Annex Y (informative) History of EN 13480-2 80 Y.1 Differences between EN 13480-2:2002 and EN 13480-2:2012 .80 Y.2 List of corrected pages of Issue 2 (2013-08) .80 Y.3 List of corrected pages of Issue 3 (2014-08) .80 Y.4 List of corrected pages of Issue 4 (2015-07) .80 Y.5 Lis
30、t of corrected pages of Issue 5 (2016-07) .80 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2014/68/EU aimed to be covered 81 Bibliography 82 BS EN 13480-2:2012+A2:20164 EN 13480-2:2012+A2:2016 (E)Issue 3 (2014-08) 5 1 Scope This Pa
31、rt of this European Standard specifies the requirements for materials (including metallic clad materials) for industrial piping and supports covered by EN 13480-1 manufactured from of metallic materials. It is currently limited to steels with sufficient ductility. This Part of this European Standard
32、 is not applicable to materials in the creep range. NOTE Other materials will be added later by amendments. It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the fabrication of industrial piping. 2 Normative references The following documents,
33、 in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 764-3:2002, Pressure equipme
34、nt Terminology Part 3: Definition of parties involved EN 1092-1:2007, Flanges and their joints Circular flanges for pipes, valves, fittings and accessories, PN designated Part 1: Steel flanges EN 10028-1:2007+A1:2009+AC:2009, Flat products made of steels for pressure purposes Part 1: General require
35、ments EN 10028-2:2009, Flat products made of steels for pressure purposes Part 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10028-3:2009, Flat products made of steels for pressure purposes Part 3: Weldable fine grain steels, normalized EN 10028-4:2009, Flat product
36、s made of steels for pressure purposes Part 4: Nickel alloyed steels with specified low temperature properties EN 10028-5:2009, Flat products made of steels for pressure purposes Part 5: Weldable fine grain steels, thermomechanically rolled EN 10028-6:2009, Flat products made of steels for pressure
37、purposes Part 6: Weldable fine grain steels, quenched and tempered EN 10028-7:2007, Flat products made of steels for pressure purposes Part 7: Stainless steels EN 10164:2004, Steel products with improved deformation properties perpendicular to the surface of the product Technical delivery conditions
38、 EN 10204:2004, Metallic products Types of inspection documents EN 10213:2007, Steel castings for pressure purposes EN 10216-1:2002+A1:2004, Seamless steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties BS EN 13480-2
39、:2012+A2:2016EN 13480-2:2012+A2:2016 (E)Issue 3 (2014-08) 6 EN 10216-2:2002+A2:2007, Seamless steel tubes for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties EN 10216-3:2002+A1:2004, Seamless steel tubes for press
40、ure purposes Technical delivery conditions Part 3: Alloy fine grain steel tubes EN 10216-4:2002+A1:2004, Seamless steel tubes for pressure purposes Technical delivery conditions Part 4: Non-alloy and alloy steel tubes with specified low temperature properties EN 10216-5:2004, Seamless steel tubes fo
41、r pressure purposes Technical delivery conditions Part 5: Stainless steel tubes EN 10217-1:2002+A1:2005, Welded steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties EN 10217-2:2002+A1:2005, Welded steel tubes for pre
42、ssure purposes Technical delivery conditions Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties EN 10217-3:2002+A1:2005, Welded steel tubes for pressure purposes Technical delivery conditions Part 3: Alloy fine grain steel tubes EN 10217-4:2002+A1:
43、2005, Welded steel tubes for pressure purposes Technical delivery conditions Part 4: Electric welded non-alloy steel tubes with specified low temperature properties EN 10217-5:2002+A1:2005, Welded steel tubes for pressure purposes Technical delivery conditions Part 5: Submerged arc welded non-alloy
44、and alloy steel tubes with specified elevated temperature properties EN 10217-6:2002+A1:2005, Welded steel tubes for pressure purposes Technical delivery conditions Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties EN 10217-7:2005, Welded steel tubes for pr
45、essure purposes Technical delivery conditions Part 7: Stainless steel tubes EN 10222-1:1998+A1:2002, Steel forgings for pressure purposes Part 1: General requirements for open die forgings EN 10222-2:2000, Steel forgings for pressure purposes Part 2: Ferritic and martensitic steels with specified el
46、evated temperature properties EN 10222-3:1998, Steel forgings for pressure purposes Part 3: Nickel steels with specified low temperature properties EN 10222-4:1998+A1:2001, Steel forgings for pressure purposes Part 4: Weldable fine grain steels with high proof strength EN 10222-5:2000, Steel forging
47、s for pressure purposes Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels EN 10253-2:2007, Butt-welding pipe fittings Part 2: Non alloy and ferritic alloy steel with specific inspection requirements BS EN 13480-2:2012+A2:2016EN 13480-2:2012+A2:2016 (E)Issue 3 (2014-08) 7 EN 10
48、269:1999+A1:2006, Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties EN 10272:2007, Stainless steel bars for pressure purposes EN 10273:2007, Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties EN 12074:199
49、9, Welding consumables Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes EN 13445-4:2009, Unfired pressure vessels Part 4: Fabrication EN 13445-5:2009, Unfired pressure vessels Part 5: Inspection and testing EN 13479:2004, Welding consumables General product standard for filler metals and fluxes for fusion welding of metallic materials EN 13480-1:2012, Metallic industrial piping Part 1: General EN 13480-3:
