EN 13523-29-2017 en Coil coated metals - Test methods - Part 29 Resistance to environmental soiling (Dirt pick-up and striping)《卷材涂层金属-试验方法-第29部分 耐土壤环境(沾污物处理和带状处理法)》.pdf
《EN 13523-29-2017 en Coil coated metals - Test methods - Part 29 Resistance to environmental soiling (Dirt pick-up and striping)《卷材涂层金属-试验方法-第29部分 耐土壤环境(沾污物处理和带状处理法)》.pdf》由会员分享,可在线阅读,更多相关《EN 13523-29-2017 en Coil coated metals - Test methods - Part 29 Resistance to environmental soiling (Dirt pick-up and striping)《卷材涂层金属-试验方法-第29部分 耐土壤环境(沾污物处理和带状处理法)》.pdf(14页珍藏版)》请在麦多课文档分享上搜索。
1、BS EN 13523-29:2017Coil coated metals TestmethodsPart 29: Resistance to environmental soiling(Dirt pick-up and striping)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 13523-29:2017 BRITISH STANDARDNational forewordThis British Standard is the UK implementation
2、 of EN 13523-29:2017.It supersedes BS EN 13523-29:2010 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee STI/21, Paint systems and surface preparation for metallicsubstrates.A list of organizations represented on this committee can beobtained on request t
3、o its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI Standards Limited 2017ISBN 978 0 580 91554 3ICS 25.220.60Compliance with a British Standa
4、rd cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affectedBS EN 13523-29:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM
5、EN 13523-29 March 2017 ICS 25.220.60 Supersedes EN 13523-29:2010English Version Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) Tles prlaques - Mthodes dessai - Partie 29 : Rsistance la pollution environnementale (salissures)Bandbeschichte
6、te Metalle - Prfverfahren - Teil 29: Bestndigkeit gegen Verschmutzung (Schmutzaufnahme und Streifenbildung) This European Standard was approved by CEN on 30 December 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europea
7、n Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (
8、English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgi
9、um, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
10、 Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN n
11、ational Members. Ref. No. EN 13523-29:2017 EBS EN 13523-29:2017EN 13523-29:2017 (E) 2 Contents Page European foreword . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Principle . 5 5 Apparatus and materials 5 6 Sample preparation 6 7 Procedure. 6 8 Evaluation 7 9 Test report . 8
12、Bibliography 9 BS EN 13523-29:2017EN 13523-29:2017 (E) 3 European foreword This document (EN 13523-29:2017) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, ei
13、ther by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CE
14、N shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13523-29:2010. The main changes are: a) the washing procedure was corrected; b) the procedure in Clause 7 has been clarified; c) the text has been revised editorially and the normative referenc
15、es have been updated. The EN 13523 series, Coil coated metals Test methods, consists of the following parts: Part 0: General introduction Part 1: Film thickness Part 2: Gloss Part 3: Colour difference Instrumental comparison Part 4: Pencil hardness Part 5: Resistance to rapid deformation (impact tes
16、t) Part 6: Adhesion after indentation (cupping test) Part 7: Resistance to cracking on bending (T-bend test) Part 8: Resistance to salt spray (fog) Part 9: Resistance to water immersion Part 10: Resistance to fluorescent UV radiation and water condensation Part 11: Resistance to solvents (rubbing te
17、st) Part 12: Resistance to scratching Part 13: Resistance to accelerated ageing by the use of heat Part 14: Chalking (Helmen method) BS EN 13523-29:2017EN 13523-29:2017 (E) 4 Part 15: Metamerism Part 16: Resistance to abrasion Part 17: Adhesion of strippable films Part 18: Resistance to staining Par
18、t 19: Panel design and method of atmospheric exposure testing Part 20: Foam adhesion Part 21: Evaluation of outdoor exposed panels Part 22: Colour difference Visual comparison Part 23: Resistance to humid atmospheres containing sulfur dioxide Part 24: Resistance to blocking and pressure marking Part
19、 25: Resistance to humidity Part 26: Resistance to condensation of water Part 27: Resistance to humid poultice (Cataplasm test) Part 29: Resistance to environmental soiling (Dirt pick-up and striping) According to the CEN-CENELEC Internal Regulations, the national standards organisations of the foll
20、owing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
21、Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 13523-29:2017EN 13523-29:2017 (E) 5 1 Scope This part of the EN 13523 series specifies a procedure for the comparative evaluation of resistance to soiling of an organic coa
22、ting on a metallic substrate (coil coating) in an outdoor exposure environment, particularly the soiling defect known as “Tiger stripes”. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For da
23、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13523-0, Coil coated metals - Test methods - Part 0: General introduction EN 13523-19:2011, Coil coated metals - Test methods - Part 19: Panel
24、design and method of atmospheric exposure testing 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13523-0 apply. 4 Principle A test panel is exposed along with known reference panels, to the effects of atmospheric dirt and rain. The dirt and rain is c
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- EN13523292017ENCOILCOATEDMETALSTESTMETHODSPART29RESISTANCETOENVIRONMENTALSOILINGDIRTPICKUPANDSTRIPING

链接地址:http://www.mydoc123.com/p-707944.html