EN 196-1-2016 en Methods of testing cement - Part 1 Determination of strength《水泥试验方法-第1部分 强度的测定》.pdf

上传人:cleanass300 文档编号:709519 上传时间:2019-01-03 格式:PDF 页数:38 大小:1.08MB
下载 相关 举报
EN 196-1-2016 en Methods of testing cement - Part 1 Determination of strength《水泥试验方法-第1部分 强度的测定》.pdf_第1页
第1页 / 共38页
EN 196-1-2016 en Methods of testing cement - Part 1 Determination of strength《水泥试验方法-第1部分 强度的测定》.pdf_第2页
第2页 / 共38页
EN 196-1-2016 en Methods of testing cement - Part 1 Determination of strength《水泥试验方法-第1部分 强度的测定》.pdf_第3页
第3页 / 共38页
EN 196-1-2016 en Methods of testing cement - Part 1 Determination of strength《水泥试验方法-第1部分 强度的测定》.pdf_第4页
第4页 / 共38页
EN 196-1-2016 en Methods of testing cement - Part 1 Determination of strength《水泥试验方法-第1部分 强度的测定》.pdf_第5页
第5页 / 共38页
点击查看更多>>
资源描述

1、BSI Standards PublicationBS EN 196-1:2016Methods of testing cementPart 1: Determination of strengthBS EN 196-1:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 196-1:2016. Itsupersedes BS EN 196-1:2005 which is withdrawn.The UK participation in its preparati

2、on was entrusted to TechnicalCommittee B/516/12, Sampling and testing.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplicat

3、ion. The British Standards Institution 2016. Published by BSI StandardsLimited 2016ISBN 978 0 580 84580 2ICS 91.100.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee

4、on 31 May 2016.Amendments issued since publicationDate Text affectedBS EN 196-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 196-1 April 2016 ICS 91.100.10 Supersedes EN 196-1:2005English Version Methods of testing cement - Part 1: Determination of strength Mthodes dessais des ciments -

5、Partie 1: Dtermination des rsistances Prfverfahren fr Zement - Teil 1: Bestimmung der Festigkeit This European Standard was approved by CEN on 20 December 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

6、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, Fr

7、ench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgari

8、a, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turke

9、y and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Re

10、f. No. EN 196-1:2016 EBS EN 196-1:2016EN 196-1:2016 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 Principle . 5 4 Laboratory and equipment 6 4.1 Laboratory . 6 4.2 General requirements for the equipment 6 4.3 Test sieves 7 4.4 Mixer 7 4.5 Moulds . 8 4.6 Jolting appar

11、atus 11 4.7 Flexural strength testing apparatus 13 4.8 Compressive strength testing machine 14 4.9 Jig for compressive strength testing machine . 15 4.10 Balance . 15 4.11 Timer 15 5 Mortar constituents . 16 5.1 Sand . 16 5.2 Cement . 17 5.3 Water 17 6 Preparation of mortar 18 6.1 Composition of mor

12、tar . 18 6.2 Mixing of mortar . 18 7 Preparation of test specimens . 18 7.1 Size of specimens 18 7.2 Moulding of test specimens 18 8 Conditioning of test specimens . 19 8.1 Handling and storage before demoulding . 19 8.2 Demoulding of specimens . 19 8.3 Curing of specimens in water. 19 8.4 Age of sp

13、ecimens for strength tests . 20 9 Testing procedures 20 9.1 Flexural strength 20 9.2 Compressive strength . 20 10 Results 21 10.1 Flexural strength 21 10.2 Compressive strength . 21 11 Validation testing of CEN Standard sand and of alternative compaction equipment . 23 11.1 General . 23 11.2 Validat

14、ion testing of CEN Standard sand . 23 11.3 Validation testing of alternative compaction equipment 26 BS EN 196-1:2016EN 196-1:2016 (E) 3 Annex A (normative) Alternative vibration compaction equipment and procedures validated as equivalent to the reference jolting compaction equipment and procedure 2

15、9 A.1 General . 29 A.2 Vibrating table, A 29 A.3 Vibrating table, B 32 BS EN 196-1:2016EN 196-1:2016 (E) 4 European foreword This document (EN 196-1:2016) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard s

16、hall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall be withdrawn at the latest by October 2016. Attention is drawn to the possibility that some of the elements of this d

17、ocument may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 196-1:2005. In comparison to EN 196-1:2005, the following changes have been made: In Clause 2, the normative references have been updated. In 10.2

18、.3 estimates of the precisions for compressive strength testing have been revised with an indication of repeatability and reproducibility at 2 d and 7 d. In 6.2 the mixing procedure has been revised with an indication of a maximum timing for the addition in the bowl. The standard has been editoriall

19、y revised. EN 196 consists of the following parts, under the general title Methods of testing cement: Part 1: Determination of strength; Part 2: Chemical analysis of cement; Part 3: Determination of setting times and soundness; Part 4: Quantitative determination of constituents (CEN/TR 196-4); Part

20、5: Pozzolanicity test for pozzolanic cement; Part 6: Determination of fineness; Part 7: Methods of taking and preparing samples of cement; Part 8: Heat of hydration - Solution method; Part 9: Heat of hydration - Semi-adiabatic method; Part 10: Determination of the water-soluble chromium (VI) content

21、 of cement. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

22、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 196-1:2016EN 196-1:2016 (E) 5 1 Scope This part of EN 196 describes t

23、he method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very shor

24、t initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN 196-1, or alternative compaction equipment. This part of EN 196 describes the reference equipment and proc

25、edure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used. 2 Normative references The following docu

26、ments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-7, Methods of test

27、ing cement - Part 7: Methods of taking and preparing samples of cement EN 197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements EN ISO 1101, Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run

28、-out (ISO 1101) EN ISO 1302, Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302) EN ISO 7500-1, Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and c

29、alibration of the force-measuring system (ISO 7500-1) ISO 565, Test sieves Metal wire cloth, perforated metal plate and electroformed sheet Nominal sizes of openings ISO 3310-1, Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth ISO 4200, Plain end steel tubes

30、, welded and seamless General tables of dimensions and masses per unit length 3 Principle The method comprises the determination of the compressive, and optionally the flexural, strength of prismatic test specimens 40 mm 40 mm 160 mm in size. These specimens are cast from a batch of plastic mortar c

31、ontaining one part by mass of cement, three parts by mass of CEN Standard sand and one half part of water (water/cement ratio 0,50). CEN Standard sands from various sources and countries may be used provided that they have been shown to give cement strength results which do not differ significantly

32、from those obtained using the CEN Reference sand (see Clause 11). BS EN 196-1:2016EN 196-1:2016 (E) 6 In the reference procedure the mortar is prepared by mechanical mixing and is compacted in a mould using a jolting apparatus. Alternative compaction equipment and procedures may be used provided tha

33、t they have been shown to give cement strength results which do not differ significantly from those obtained using the reference jolting apparatus and procedure (see Clause 11 and Annex A). The specimens are stored in the mould in a moist atmosphere for 24 h and, after demoulding, specimens are stor

34、ed under water until strength testing. At the required age, the specimens are taken from their wet storage, broken in flexure, determining the flexural strength where required, or broken using other suitable means which do not subject the prism halves to harmful stresses, and each half tested for st

35、rength in compression. 4 Laboratory and equipment 4.1 Laboratory The laboratory where preparation of specimens takes place shall be maintained at a temperature of (20 2) C and a relative humidity of not less than 50 %. The moist air room or the large cabinet for storage of the specimens in the mould

36、 shall be maintained at a temperature of (20,0 1,0) C and a relative humidity of not less than 90 %. The storage containers for curing the specimens in water, and the grates with which they are fitted, shall be of material which does not react with cement. The temperature of the water shall be maint

37、ained at (20,0 1,0) C. The temperature and relative humidity of the air in the laboratory and the temperature of the water in the storage containers shall be recorded at least once a day during working hours. The temperature and relative humidity of the moist air room or cabinet shall be recorded at

38、 least every 4 h. Cement, CEN Standard sand (see 5.1.3), water and apparatus used to make and test specimens shall be at a temperature of (20 2) C. Where temperature ranges are given, the target temperature at which the controls are set shall be the middle value of the range. 4.2 General requirement

39、s for the equipment The tolerances shown in Figures 1 to 5 are important for correct operation of the equipment in the testing procedure. When regular control measurements show that the tolerances are not met, the equipment shall be rejected, adjusted or repaired. Records of control measurements sha

40、ll be kept. Acceptance measurements on new equipment shall cover mass, volume, and dimensions to the extent that these are indicated in this document paying particular attention to those critical dimensions for which tolerances are specified. In those cases where the material of the equipment can in

41、fluence the results, the material is specified and shall be used. The approximate dimensions shown in the figures are provided as guidance to equipment manufacturers or operators. Dimensions, which include tolerances, are obligatory. BS EN 196-1:2016EN 196-1:2016 (E) 7 4.3 Test sieves Wire cloth tes

42、t sieves conforming to ISO 3310-1 shall be of the sizes from ISO 565 given in Table 1 (series R 20). Table 1 Aperture of test sieves Square mesh size (mm) 2,00 1,60 1,00 0,50 0,16 0,08 4.4 Mixer The mixer shall consist essentially of: a) a stainless steel bowl with a capacity of about 5 l of the typ

43、ical shape and size shown in Figure 1, provided with means by which it can be fixed securely to the mixer frame during mixing and by which the height of the bowl in relation to the blade and, to some extent, the gap between blade and bowl can be finely adjusted and fixed; b) a stainless steel blade

44、of the typical shape, size and tolerances shown in Figure 1, revolving about its own axis as it is driven in a planetary movement around the axis of the bowl at controlled speeds by an electric motor. The two directions of rotation shall be opposite and the ratio between the two speeds shall not be

45、a whole number. Blades and bowls shall form sets which shall always be used together. The gap of (3 1) mm refers to the situation when the blade in the empty bowl shown in Figure 1 is brought as close as possible to the wall. This gap shall be checked regularly applying minimal pressure to the blade

46、 and assuring that there is no perceptible clearance between the joint of the blade and the axis of the motor. NOTE 1 Simple tolerance gauges (feeler gauges) are useful where direct measurement is difficult. NOTE 2 The dimensions marked as approximate on Figure 1 are for the guidance of manufacturer

47、s. The mixer shall operate at the speeds given in Table 2 when mixing the mortar. Table 2 Speeds of mixer blade Rotation Planetary movement min 1min 1Low speed 140 5 62 5 High speed 285 10 125 10 BS EN 196-1:2016EN 196-1:2016 (E) 8 Dimensions in millimetres Key 1 bowl 2 blade Figure 1 Typical bowl a

48、nd blade 4.5 Moulds The mould shall consist of three horizontal compartments so that three prismatic specimens 40 mm 40 mm in cross section and 160 mm in length can be prepared simultaneously. A typical design is shown in Figure 2. The mould shall be made of steel with walls approximately 10 mm thic

49、k. Each internal side face of the mould shall be case hardened to a Vickers hardness of at least HV 200, as supplied. A minimum Vickers hardness value of HV 400 is recommended. The mould shall be constructed in such a manner as to facilitate the removal of moulded specimens without damage. Each mould shall be provided with a machined steel or cast iron baseplate. The mould, when assembled, shall be positively and rigidly held together and fixed to the baseplate. The assembly shall be such that there is no dist

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1