1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 2591-307:2012Aerospace series Elementsof electrical and opticalconnection Test methodsPart 307: Salt mistBS EN 2591-307:2012 BRITISH STANDARDNational forewordThis British S
2、tandard is the UK implementation of EN 2591-307:2012.It supersedes BS EN 2591-307:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee ca
3、n beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012. Published by BSI StandardsLimited 2012ISBN 978 0 580 66948 4ICS 49.060; 49.090Com
4、pliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2012.Amendments issued since publicationDate Text affectedBS EN 2591-307:2012EUROPEAN STANDARD NORME EUROPENNE
5、 EUROPISCHE NORM EN 2591-307 July 2012 ICS 49.060; 49.090 Supersedes EN 2591-307:1998English Version Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist Srie arospatiale - Organes de connexion lectrique et optique - Mthodes dessais - Partie 307: Brou
6、illard salin Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prfverfahren - Teil 307: SalznebelThis European Standard was approved by CEN on 23 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu
7、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versi
8、ons (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria,
9、Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Sw
10、itzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members
11、. Ref. No. EN 2591-307:2012: EBS EN 2591-307:2012EN 2591-307:2012 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Preparation of specimens . 44 Apparatus . 45 Method 5BS EN 2591-307:2012EN 2591-307:2012 (E) 3 Foreword This document (EN 2591-307:2012) has been prepared by the Aerospa
12、ce and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior t
13、o its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at the latest by January 2013. Attention is drawn to
14、the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2591-307:1998. According to the CEN/CENELEC Internal Regulations, the national s
15、tandards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania
16、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 2591-307:2012EN 2591-307:2012 (E) 4 1 Scope This European Standard specifies a method of assessing the effects of salt mist on elements of connect
17、ion. It should be used together with EN 2591-100. The test is based on EN 60068-2-11. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For
18、undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 2591-101, Aerospace series Elements of electrical and optical connection Test methods Pa
19、rt 101: Visual examination EN 2591-205, Aerospace series Elements of electrical and optical connection Test methods Part 205: Housing (shell) electrical continuity EN 2591-408, Aerospace series Elements of electrical and optical connection Test methods Part 408: Mating and unmating forces EN 60068-2
20、-11:1999, Environmental testing Part 2-11: Tests Test Ka: Salt mist (IEC 60068-2-11:1981) 3 Preparation of specimens 3.1 The specimens shall be prepared according to the technical specification. 3.2 Unless specified in the technical specification, the following details shall be stated: number of mat
21、ing and unmating operations before test (if applicable); specimens mated or unmated (if applicable); mounting method, position and definition of specimen wiring; type of cable (if applicable); duration of the test; initial measurements (if applicable); final measurements and requirements (if applica
22、ble). 4 Apparatus 4.1 Test chamber The test chamber shall meet the requirements of EN 60068-2-11:1999, Clause 3. BS EN 2591-307:2012EN 2591-307:2012 (E) 5 4.2 Salt mist The salt solution shall meet the requirements of EN 60068-2-11:1999, Clause 4. 5 Method 5.1 Initial measurements (if applicable) Th
23、ey shall be carried out as specified in the technical specification. 5.2 Procedure The specimens shall be tested in accordance with EN 60068-2-11:1999, Clause 7. 5.3 Recovery To aid in examination, specimens shall be prepared in the following manner, unless otherwise specified. Salt deposits shall b
24、e removed by a gentle wash or a dip in running water not warmer than 38 C and a light brushing, if necessary, using a soft-hairbrush or plastic-bristle brush. The specimens shall then be allowed to dry in accordance with EN 60068-2-11:1999, Clause 8. 5.4 Final measurements and requirements (if appli
25、cable) The specimens shall be submitted to the following test sequence: EN 2591-101, paying particular attention to: cracking; flaking or peeling of the plating; pitting of exposed metal surfaces; EN 2591-205 (if applicable); EN 2591-408 (if applicable).This page deliberately left blankThis page del
26、iberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standa
27、rds and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users
28、 of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secr
29、etary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensur
30、es that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders fo
31、r BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unle
32、ss otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and re
33、ceive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be fo
34、und at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (su
35、ch as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any mean
36、s electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email:
