1、BS EN 2817:2009ICS 49.025.10NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted Solution treated and precipitation treated Bar for machining a or D null 200 mm Rm null1 070 MPaThis British
2、 Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January2010 BSI 2010ISBN 978 0 580 68927 7Amendments/corrigenda issued since publicationDate CommentsBS EN 2817:2009National forewordThis British Standard is the UK implementation of EN 2817:2009. The UK
3、 participation in its preparation was entrusted to TechnicalCommittee ACE/61/-/15, Steels.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for
4、 its correct application. Compliance with a British Standard cannot confer immunityfrom legal obligations.BS EN 2817:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2817 November 2009 ICS 49.025.10 English Version Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode reme
5、lted - Solution treated and precipitation treated - Bar for machining - a or D 200 mm - Rm 1 070 MPa Srie arospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu llectrode consommable - Mis en solution et vieilli - Barres pour usinage - a ou D 200 mm - Rm 1 070 MPa Luft- und Raumfahrt - Stahl FE-PM18
6、02 (X5CrNiCu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen - Lsungsgeglht und ausgelagert - Stangen zur spanenden Bearbeitung - a oder D 200 mm - Rm 1 070 MPa This European Standard was approved by CEN on 8 August 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulation
7、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This Europ
8、ean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the nat
9、ional standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
10、 United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2817:20
11、09: EBS EN 2817:2009EN 2817:2009 (E) 2 Foreword This document (EN 2817:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has receive
12、d the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, an
13、d conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Accordi
14、ng to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
15、 Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 2817:2009EN 2817:2009 (E) 3 Introduction This European Standard is part of the series of EN metallic material standards for aerospace applicatio
16、ns. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. BS EN 2817:2009EN 2817:2009 (E) 4 1 Scope This European Standard specifies the requirements relating to: Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted Sol
17、ution treated and precipitation treated Bar for machining a or D 200 mm Rm 1 070 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated referen
18、ces, the latest edition of the referenced document (including any amendments) applies. EN 2043, Aerospace series Metallic materials General requirements for semi-finished product qualification (excluding forgings and castings) 1)EN 4258, Aerospace series Metallic materials General organization of st
19、andardization Links between types of EN standards and their use EN 4436, Aerospace series Steel Test methods Determination of ferrite content1)EN 4500-5, Aerospace series Metallic materials Rules for drafting and presentation of material standards Part 5: Specific rules for steels1) EN 4700-002, Aer
20、ospace series Steel and heat resisting alloys Wrought products Technical specification Part 002: Bar and section 1)1) Published as ASD-STAN Prestandard at the date of publication of this standard. BS EN 2817:2009EN 2817:2009 (E) 5 1 Material designation Steel FE-PM1802 (X5CrNiCu15-5) 2 Chemical comp
21、osition % Element C Si Mn P S Cr Mo Ni Cu Nb + Ta Fe min. 14,0 3,5 2,5 5 C Base max. 0,07 1,00 1,00 0,030 0,015 15,5 0,50 5,5 4,5 0,45 3 Method of melting Consumable electrode remelted 4.1 Form Bar 4.2 Method of production 4.3 Limit dimension(s) mm a or D 200 5 Technical specification EN 4700-2 6.1
22、Delivery condition Solution treated Solution treated and precipitation treated Heat treatment 1 025 C 1 055 C / t 30 min / AC or OQ+ cool to 30 C 1 025 C 1 055 C / t 30 min / AC or OQ + cool to 30 C + 535 C 565 C / t 4 h / AC 6.2 Delivery condition code W U 7 Use condition Solution treated and preci
23、pitation treated Delivery condition Heat treatment Delivery condition + 535 C 565 C / t 4 h / AC Characteristics 8.1 Test sample(s) See EN 4700-2. 8.2 Test piece(s) See EN 4700-2. 8.3 Heat treatment Solution treated Use condition 9 Dimensions concerned mm a or D 200 a or D 75 75 a or D 200 10 Thickn
24、ess of cladding on each face % 11 Direction of test piece L L T 12 T Temperature C Ambient Ambient Ambient 13 Proof stress Rp0,2 MPa 1 000 1 000 1 000 14 Strength Rm MPa 1 070 1 070 1 070 15 Elongation A % 11 10 7 16 Reduction of area Z % 45 40 27 17 Hardness 363 HB 331 HB 401 331 HB 401 331 HB 401
25、18 Shear strength Rc MPa 19 Bending k 20 Impact strength KV J 80; Notch direction T + 35, at 30 C 80; Notch direction T + 35, at 30 C 55; Notch direction L + 25, at 30 C 21 C Temperature C 22 Time h 23 Stress a MPa 24 Elongation a % 25 Rupture stress R MPa 26 Elongation at rupture A % 27 Notes (see
26、line 98) BS EN 2817:2009EN 2817:2009 (E) 6 30 Microstructure EN 4436 2 One per cast 3 Corresponding to ingot top 7 The ferrite content shall not exceed 2 % 34 Grain size See EN 4700-2. 7 G 5 44 External defects See EN 4700-2. 1 Visual 50 Cleanliness/inclusion content See EN 4700-2. (micro-cleanness)
27、 7 Category 4 51 Macrostructure See EN 4700-2. 7 Class Condition Severity 1 Freckles A 2 White spots A 3 Radial segregation A 4 Ring pattern B 61 Internal defects See EN 4700-2. 6 a or D 100 mm may be tested either on the product or at an earlier stage of manufacturing. 7 Class 3 95 Marking inspecti
28、on See EN 4700-2. 96 Dimensional inspection See EN 4700-2. 98 Notes 99 Typical use BS EN 2817:2009EN 2817:2009 (E) 7 100 Product qualification See EN 2043. Qualifcation programe to be agred betwen manufacturer and purchaser. BS EN2817:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, U
29、KTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are
30、 updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British
31、 Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receiv
32、e the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Websi
33、te http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standar
34、ds through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kep
35、t up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via
36、 British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the C
37、opyright, Designs and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the
38、standard,of necessary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email:
