1、BS EN 2997-002:2016Aerospace series Connectors, electrical, circular,coupled by threaded ring, fire-resistant or non fire-resistant,operating temperatures 65C to 175 C continuous, 200 Ccontinuous, 260 C peakPart 002: Specification of performance andcontact arrangementsBSI Standards PublicationWB1188
2、5_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 2997-002:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 2997-002:2016. It supersedes BS EN 2997-002:2012 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee
3、 ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application
4、. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 92599 3 ICS 49.060 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on
5、 30 September 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 2997-002:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2997-002 September 2016 ICS 49.060 Supersedes EN 2997-002:2012English Version Aerospace series - Connectors, electrical, circular, coup
6、led by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 200 C continuous, 260 C peak - Part 002: Specification of performance and contact arrangements Srie arospatiale - Connecteurs lectriques circulaires accouplement par bague filete, rsistant
7、au feu ou non, tempratures dutilisation - 65 C 175 C continu, 200 C continu, 260 C en pointe - Partie 002 : Spcification de performances et darrangements des contacts Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Schraubkupplung, feuerbestndig oder nicht feuerbestndig, Betriebstemperature
8、n - 65 C bis 175 C konstant, 200 C konstant, 260 C Spitze - Teil 002: Leistungsdaten und Kontaktanordnungen This European Standard was approved by CEN on 4 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European St
9、andard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Engl
10、ish, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium,
11、Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland
12、, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membe
13、rs. Ref. No. EN 2997-002:2016 EBS EN 2997-002:2016EN 2997-002:2016 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope .4 2 Normative references .4 3 Model description and codification of models 6 4 Terms and definitions 8 5 Operating conditions 8 6 Connector type codes 10 7 Polarizat
14、ion 12 8 Housing sizes and contact arrangements . 13 9 Contacts 22 10 Sealing plugs 22 11 Cable outlets . 22 12 Tooling . 22 13 Assembly and wiring instruction 22 BS EN 2997-002:2016EN 2997-002:2016 (E) 3 European foreword This document (EN 2997-002:2016) has been prepared by the Aerospace and Defen
15、ce Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presen
16、tation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2017, and conflicting national standards shall be withdrawn at the latest by March 2017. Attention is drawn to the possibility
17、that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 2997-002:2012. According to the CEN-CENELEC Internal Regulations, the national standards organiz
18、ations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Ma
19、lta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 2997-002:2016EN 2997-002:2016 (E) 4 Introduction This family of connectors is derived from MIL-DTL-83723 series III, type T with which it is intermateable. 1 Scop
20、e This European Standard defines the performance and contact arrangements of circular electrical connectors, coupled by threaded ring. It also lists the product standards and models available for selection in this series. 2 Normative references The following documents, in whole or in part, are norma
21、tively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-202, Aerospace series Elements of electrical and optic
22、al connection Test methods Part 202: Contact resistance at rated current EN 2591-209, Aerospace series Elements of electrical and optical connection Test methods Part 209: Current temperature derating EN 2997-001, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resi
23、stant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 001: Technical specificationEN 2997-003, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 1
24、75 C continuous, 200 C continuous, 260 C peak Part 003: Square flange receptacle Product standard EN 2997-004, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C p
25、eak Part 004: Jam-nut mounted receptacle Product standard EN 2997-005, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 005: Hermetic square flange rec
26、eptacle Product standard EN 2997-006, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 006: Hermetic jam-nut mounted receptacle Product standard EN 299
27、7-007, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 007: Hermetic receptacle with round flange attached by welding or brazing Product standardBS EN
28、 2997-002:2016EN 2997-002:2016 (E) 5 EN 2997-008, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 008: Plug Product standard EN 2997-009, Aerospace se
29、ries Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 009: Protective cover for receptacle Product standard EN 2997-010, Aerospace series Connectors, electrical, circul
30、ar, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 010: Protective cover for plug Product standard EN 2997-011, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resist
31、ant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 011: Dummy receptacle Product standard EN 2997-012, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures
32、65 C to 175 C continuous, 200 C continuous, 260 C peak Part 012: Jam-nut for jam-nut receptacles Product standard EN 2997-013, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C con
33、tinuous, 260 C peak Part 013: O-ring seal for jam-nut receptacles Product standard EN 2997-014, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 014: S
34、quare flange receptacle with integrated accessory Product standard EN 2997-015, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 015: Jam-nut mounted r
35、eceptacle with integrated accessory Product standard EN 2997-016, Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures 65 C to 175 C continuous, 200 C continuous, 260 C peak Part 016: Plug with integrated accessory
36、Product standard EN 3155-002, Aerospace series Electrical contacts used in elements of connection Part 002: List and utilization of contacts EN 3155-004, Aerospace series Electrical contacts used in elements of connection Part 004: Contacts, electrical, male, type A, crimp, class T Product standard
37、EN 3155-005, Aerospace series Electrical contacts used in elements of connection Part 005: Contacts, electrical, female, type A, crimp, class T Product standard EN 3155-018, Aerospace series Electrical contacts used in elements of connection Part 018: Contacts, electrical, male, type A, crimp, class
38、 S Product standard EN 3155-019, Aerospace series Electrical contacts used in elements of connection Part 019: Contacts, electrical, female, type A, crimp, class S Product standard EN 3155-080, Aerospace series Electrical contacts used in elements of connection Part 080: Contacts, size 22 for EN 299
39、7, electrical, male, type A, crimp, class T Product standard BS EN 2997-002:2016EN 2997-002:2016 (E) 6 EN 3155-081, Aerospace series Electrical contacts used in elements of connection Part 081: Contacts, size 22 for EN 2997, electrical, female, type A, crimp, class T Product standard EN 3197, Aerosp
40、ace series Design and installation of aircraft electrical and optical interconnection systems EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards EN 4529-002, Aerospace series Elements of electrica
41、l and optical connection Sealing plugs Part 002: Index of product standards MIL-DTL-83723, Connectors, electrical, (circular, environment resisting), receptacles and plugs, general specification for 1)3 Model description and codification of models See Table 1. 1) Published by: DoD National (US) Mil.
42、 Department of Defense. http:/www.defenselink.mil/ BS EN 2997-002:2016EN 2997-002:2016 (E) 7 Table 1 Model description (1 of 2) Class Model description Connectors W Sealed plug with housing (shell) in olive-green cadmium-plated aluminium alloy, conductive finish, 500 h resistance to salt mist, crimp
43、 contacts, maximum operating temperature 175 C continuous WS Sealed plug and receptacle with housing (shell) in olive-green cadmium-plated aluminium alloy, conductive finish, 500 h resistance to salt mist, crimp contacts, plug with grounding-spring-system, maximum operating temperature 175 C continu
44、ous K Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire resistant, maximum operating temperature 200 C continuous KV Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire r
45、esistant, high vibrations, maximum operating temperature 260 C peak SV Sealed plug and receptacle with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire resistant, high vibrations, plug with grounding-spring-system, maximum operating temperature 260 C
46、 peak SF Sealed plug and receptacle with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire-resistant (including fire immersion), high vibrations, plug with grounding-spring-system, maximum operating temperature 260 C peak R Sealed plug with housing (s
47、hell) in nickel-plated aluminium alloy, 48 h resistance to salt mist, crimp contacts, maximum operating temperature 200 C continuous RS Sealed plug and receptacle with housing (shell) in nickel-plated aluminium alloy, 48 h resistance to salt mist, crimp contacts, plug with grounding-spring-system, m
48、aximum operating temperature 200 C continuous S Sealed plug and receptacle with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire resistant, plug with grounding-spring-system, maximum operating temperature 200 C continuous Y Hermetic receptacle with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, solder contacts, maximum operating temperature 200 C continuous KE Sealed plug with housing (shell) in passivated stainless steel, 500 h resistance to salt mist, crimp contacts, fire resistant, maximum operating temperat
