1、BRITISH STANDARD AEROSPACE SERIESBS EN 4165-012:2005Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 012: Flange mounting receptacle 2 and 4 modules, series 3 Product standardThe European Standard EN 4165-012:2005 has the status of a British StandardICS 49.060
2、g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 4165-012:2005This British Standard was published under the authority of the Standards Policy a
3、nd Strategy Committee on 28 February 2006 BSI 28 February 2006ISBN 0 580 47890 4National forewordThis British Standard is the official English language version of EN 4165-012:2005. The UK participation in its preparation was entrusted by Technical Committee ACE/6, Aerospace avionic electrical and fi
4、bre optic technology, to Subcommittee ACE/6/-/3, Aerospace connectors, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications re
5、ferred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary prov
6、isions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation
7、, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 8, an inside back cover and a back cover.The BS
8、I copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4165-012 November 2005 ICS 49.060 English Version Aerospace series - Connectors, electrical, rectang
9、ular, modular -Operating temperature 175 C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard Srie arospatiale - Connecteurs lectriques rectangulaires modulaires - Temprature dutilisation 175 C continu - Partie 012 : Embase collerette 2 et 4 modules, srie
10、3 - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 012: Feste Steckverbinder mit Montageflansch mit 2 und 4 Modulen, Serie 3 - Produktnorm This European Standard was approved by CEN on 30 September 2005. CEN
11、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl
12、ication to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has
13、the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slov
14、akia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All rights of exploitation in any form and by any means reserved worldwi
15、de for CEN national Members. Ref. No. EN 4165-012:2005: E2 Contents Page Foreword 3 1 Scope .4 2 Normative references .4 3 Terms and definitions.4 4 Required characteristics 4 5 Flange mounting receptacle.5 6 Designation .7 7 Marking 8 8 Technical specification.8 EN 4165-012:20053 Foreword This Euro
16、pean Standard (EN 4165-012:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and t
17、he Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withd
18、rawn at the latest by May 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the
19、 national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Polan
20、d, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 4165-012:20054 1 Scope This standard defines the flange mounting receptacle 2 and 4 modules, series 3 used in the family of rectangular electrical connectors. The plugs corresponding to those receptacles are defin
21、ed in EN 4165-002. The protective covers corresponding to those receptacles are defined in EN 4165-018. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the
22、latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series Marking of aerospace products. EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification. EN 4165-002, Aer
23、ospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 002: Specification of performance and contact arrangements. EN 4165-018, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 018: Protective co
24、ver for receptacle, 2 and 4 modules, series 2 and series 3 Product standard. EN 4165-020, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 020: Coupling system keyway for receptacle Product standard. 3 Terms and definitions For the purposes of
25、 this standard, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 for 2 modules and Figure 2 for 4 modules. EN 4165-012:20055 5 Flange mounting receptacle 5.1 For 2 modules classes W, F and A Dimensions are in millimetres. Key 1 groove only for class W, F
26、and A 2 accepted form of flange Figure 1 EN 4165-012:20056 5.2 For 4 modules classes W, F and A Dimensions are in millimetres. Key 1 groove only for class W, F and A 2 accepted form of flange Figure 2 EN 4165-012:20057 5.3 Flange mounting receptacle class See Table 1. Table 1 Class Description W Fla
27、nge mounting receptacles with housing (shell) olive drab cadmium plated, aluminium alloy, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 175 C continuous F Flange mounting receptacles with housing (shell) black nickel plated, aluminium alloy, 96 hours resistance
28、to salt mist, maximum operating temperature 175 C continuous A Flange mounting receptacles with housing (shell) black anodised plated, aluminium alloy, no conducting finish, 48 hours resistance to salt mist, maximum operating temperature 175 C continuous 6 Designation EXAMPLE: Description block ELEC
29、TRICAL CONNECTOR PLUG Identity block EN4165F7B400 Number of the basic standard Class type (see Table 1) Type 7: Receptacle (see EN 4165-002) B = series 3 Shell type 4 = plug 4 modules 2 = plug 2 modules Plug keying coupling (number not marked on the connector) 0 A = Not delivered Standard 1 2 3 4 5
30、6 Keying code (special coding) State of delivery receptacle keying coupling (see EN 4165-020) (Not marked on the connector) 0 Delivered: not fitted 1 2 3 4 5 6 Fitted in the receptacle EN 4165-012:20058 7 Marking Unless there are other specific contractual requirements, the marking shall be in accor
31、dance with EN 2424, category P. 8 Technical specification See EN 4165-001. EN 4165-012:2005blankBS EN 4165-012:2005BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standa
32、rds in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of o
33、ur products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996
34、 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996
35、 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise reques
36、ted.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services.
37、Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Members
38、hip Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyrigh
39、t subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or
40、 by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
