EJ T 20102-2016 1557 Design criteria for sodium cooled fast breeder reactor Safety classification of structure system and component《钠冷快中子增殖堆设计准则 构筑物、系统和部件安全分级》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

ASD-STAN PREN 2605-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring 24 Degrees Union Interface Dimensions (Issue P 1)《航空航天系列 带锁紧环的直型公制规格连接器 24°30'连接器接口尺寸 第P1版》.pdf

ASD-STAN PREN 2606-2008 Aerospace series 60 degrees interface for adaptors threaded with lockring Geometric configuration (Edition P1)《航空航天系列 带锁环的有螺纹转接器用60°接口 几何形状 第P1版》.pdf

ASD-STAN PREN 2607-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Configuration O-Ring Dimensions (Issue P 1)《航空航天系列 带锁紧环的直型公制规格连接器 O形环形状 尺寸 第P1版》.pdf

ASD-STAN PREN 2608-1999 Aerospace Series Installation and Removal Requirements for 8 Degree 30' Adaptors Threaded with Lockring (Edition P 1)《航空航天系列 带锁环的有螺纹8°30'转接器的安装和拆卸要求 第P1版》.pdf

ASD-STAN PREN 2609-1985 Aerospace Series Turnbarrels Control Cable in Copper-Zinc Alloys Dimensions and Loads (Edition 1)《航空航天系列 铜-锌合金制控制索用旋转套筒 尺寸和负荷 第1版》.pdf

ASD-STAN PREN 2615-1986 Aerospace Series Wire to Close Tolerance in Aluminium and Aluminium Alloys 1 6 Less Than or Equal to D Less Than or Equal to 9 6 mm Dimensions (Issue P 1)《航.pdf

ASD-STAN PREN 2616-1986 Aerospace Series Wire for Rivets in Aluminium and Aluminium Alloys Large Tolerances D Less Than or Equal to 10 mm Dimensions (Issue P 1)《航空航天系列 D≤10mm的铝和铝合金.pdf

ASD-STAN PREN 2617-1995 Aerospace Series Plate in Titanium and Titanium Alloys Thickness 6 mm Less Than a Less Than or Equal to 100 mm Dimensions (Edition P 2)《航空航天系列 6＜a≤100mm的钛和钛.pdf

ASD-STAN PREN 2622-1996 Aerospace Series Circular Tube for Fluids in Heat Resisting Alloys Diameter 3 2 mm Less Than or Equal to D Less Than or Equal to 100 mm Thickness 0 32 mm Le.pdf