EJ T 845-1994 《放射性药品溶液pH值测定方法》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

BS 3HR 504-2011 Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor sectional dimension 20 mm) (Nickel bas.pdf

BS 3J 12-1991 Specification for pressure-sensitive adhesive identification tape《压敏胶粘识别带规范》.pdf

BS 3L 122-1970 Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8 Zn 0 5 Mn 0 3)《镁-铝(8)-锌(0 5)-锰(0 3)合金铸锭和铸件规范(固溶处理)》.pdf

BS 3L 63-1971 Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4 4 Mg 0 5 Si 0 7 Mn 0 8)《铝-铜-(4 4)-镁(0 .pdf

BS 3L 80-1985 Specification for sheet and strip of aluminium-21 4% magnesium alloy (temper designation-O)《铝-镁2 25%合金板材和带材规范(强度符号-0)》.pdf

BS 3L 81-1985 Specification for sheet and strip of aluminium-21 4% magnesium alloy (temper designation H16 or H26)《铝-镁2 25%合金板材和带材规范(强度符号-H16或H26)》.pdf

BS 3N 3-2000 Breathing oxygen for airborne applications《航空用供氧装置》.pdf

BS 3S 102-1969 Specification for carbon-molybdenum steel (bar for the manufacture of forged bolts only)《碳钼钢(仅供锻造螺栓用的棒材)规范》.pdf

BS 3S 132-1976 Specification - 3% chromium-molybdenum-vanadium steel billets bars forgings and parts (1320-1470 MPa limiting ruling section 70 mm) (suitable for nitriding)《含3%铬-钼-钒.pdf