EN 14869-1-2011 en Structural adhesives - Determination of shear behaviour of structural bonds - Part 1 Torsion test method using butt-bonded hollow cylinders《结构胶粘剂 确定剪切行为的结构性债券 第1.pdf

上传人:lawfemale396 文档编号:714541 上传时间:2019-01-04 格式:PDF 页数:18 大小:1.08MB
下载 相关 举报
EN 14869-1-2011 en Structural adhesives - Determination of shear behaviour of structural bonds - Part 1 Torsion test method using butt-bonded hollow cylinders《结构胶粘剂 确定剪切行为的结构性债券 第1.pdf_第1页
第1页 / 共18页
EN 14869-1-2011 en Structural adhesives - Determination of shear behaviour of structural bonds - Part 1 Torsion test method using butt-bonded hollow cylinders《结构胶粘剂 确定剪切行为的结构性债券 第1.pdf_第2页
第2页 / 共18页
EN 14869-1-2011 en Structural adhesives - Determination of shear behaviour of structural bonds - Part 1 Torsion test method using butt-bonded hollow cylinders《结构胶粘剂 确定剪切行为的结构性债券 第1.pdf_第3页
第3页 / 共18页
EN 14869-1-2011 en Structural adhesives - Determination of shear behaviour of structural bonds - Part 1 Torsion test method using butt-bonded hollow cylinders《结构胶粘剂 确定剪切行为的结构性债券 第1.pdf_第4页
第4页 / 共18页
EN 14869-1-2011 en Structural adhesives - Determination of shear behaviour of structural bonds - Part 1 Torsion test method using butt-bonded hollow cylinders《结构胶粘剂 确定剪切行为的结构性债券 第1.pdf_第5页
第5页 / 共18页
点击查看更多>>
资源描述

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 14869-1:2011Structural adhesives Determination of shear behaviour of structural bondsPart 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modif

2、ied)BS EN 14869-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14869-1:2011.It was derived from ISO 11003-1:2001. It supersedes BS EN 14869-1:2004 and BS ISO 11003-1:2001, which are withdrawn.The UK participation in its preparation was entrusted to Techn

3、ical Committee PRI/52, Adhesives.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 72246

4、 2 ICS 83.180 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationDate Text affectedBS EN 14869-1:2011EUROPEAN STANDA

5、RD NORME EUROPENNE EUROPISCHE NORM EN 14869-1 May 2011 ICS 83.180 Supersedes EN 14869-1:2004English Version Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) Adhsifs structuraux -

6、Dtermination du comportement en cisaillement de collages structuraux - Partie 1 : Mthode dessai en torsion de cylindres creux colls bout bout (ISO 11003-1:2001, modifi) Strukturklebstoffe - Bestimmung des Scherverhaltens struktureller Klebungen - Teil 1: Torsionsprfverfahren unter Verwendung stumpf

7、verklebter Hohlzylinder (ISO 11003-1:2001, modifiziert) This European Standard was approved by CEN on 10 March 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without an

8、y alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other langua

9、ge made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark,

10、 Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION

11、 EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14869-1:2011: EBS EN 14869-1:2011EN 14869-1:2011 (E) 2 Contents Page Foreword 31 Scope 42 Nor

12、mative references 43 Terms and definitions .44 Principle 45 Apparatus .46 Test specimen 66.1 Preparation .66.1.1 Substrate material66.1.2 Preparation of the surface 66.1.3 Bonding 66.1.4 Adhesive bond .86.1.5 Dimensions 106.2 Number of specimens 107 Test conditions . 107.1 Temperature 107.2 Shear ra

13、te 108 Procedure 119 Calculations . 1110 Precision 1311 Test report . 13BS EN 14869-1:2011EN 14869-1:2011 (E) 3 Foreword This document (EN 14869-1:2011) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given t

14、he status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn to the possibility that some of the elements of this document may b

15、e the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14869-1:2004. SAFETY STATEMENT Persons using this document should be familiar with the normal laboratory practice, if applicable. This document

16、does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. ENVIRONMENTAL STATEMENT It is understood that some of the materi

17、al permitted in this standard may have negative environmental impact. As technological advantages lead to acceptable alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard should take care to carry out an

18、appropriate disposal of the wastes, according to local regulation. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E

19、stonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 14869-1:2011EN 14869-1:2011 (E) 4 1 Scope This European Stand

20、ard specifies a shear test for the characterization of adhesives in a bond. The shear stress/strain properties of the adhesive (including the shear modulus) are useful for advanced design work, e.g. in finite element analysis methods. 2 Normative references The following referenced documents are ind

21、ispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 923:2005+A1:2008, Adhesives Terms and definitions EN 13887, Structural Adhesives Guideli

22、nes for surface preparation of metals and plastics prior to adhesive bonding EN ISO 291, Plastics Standard atmospheres for conditioning and testing (ISO 291:2008) EN ISO 10365, Adhesives Designation of main failure patterns (ISO 10365:1992) 3 Terms and definitions For the purposes of this document,

23、the terms and definitions given in EN 923:2005+A1:2008 apply. 4 Principle The shear deformation of the adhesive in an annular bond between two hollow cylinders, and the corresponding torque, are measured and recorded up to failure of the joint. 5 Apparatus 5.1 Torsion-testing machine, with a capacit

24、y of at least 300 Nm and preferably of 1 000 Nm. Alternatively, a suitably adapted tensile-testing machine may be used. The machine shall include equipment for recording the torque instantaneously with an error of less than 1 %. The gripping heads shall be accurately aligned and, if no hydraulic gri

25、pping mechanism is available, all bolts and holes shall be precisely machined so that the specimens are mounted in the apparatus and tested free of uncontrolled loads. The machine shall be equipped with an adequately thermostatted chamber if tests are to be carried out at temperatures different from

26、 the ambient temperature. 5.2 Displacement sensor (see Figure 1), capable of measuring, as near as possible to the bond line, the displacement of the two adherends relative to each other and hence the deformation of the adhesive. The sensor and its associated target shall be rigidly mounted on the t

27、wo adherends as shown in Figure 1. The range of the displacement-measuring equipment shall be adjustable to permit the full-scale reading to be varied between 2 m and 1 000 m. The equipment shall be capable of measuring displacements to an accuracy of 1 m. The sensor shall be of lightweight and robu

28、st construction since it is subjected to high accelerations on failure of the specimen. BS EN 14869-1:2011EN 14869-1:2011 (E) 5 Key 1 Adherends 2 Target support (on upper adherend) 3 Butt joint 4 Sensor support (on lower adherend) 5 Displacement sensor 6 Target Figure 1 Adhesive-layer specimen with

29、displacement sensor mounted in the test apparatus BS EN 14869-1:2011EN 14869-1:2011 (E) 6 6 Test specimen 6.1 Preparation 6.1.1 Substrate material Aluminium alloy or steel are suitable materials for the adherends. Other materials are acceptable provided the material (including pre-treated surface la

30、yers) has a shear modulus at least ten times higher than that of the adhesive. 6.1.2 Preparation of the surface The surfaces to be bonded shall be prepared in accordance with EN 13887 or by any method leading to a cohesive failure within the adhesive layer. 6.1.3 Bonding Prepare the specimens in acc

31、ordance with the instructions of the manufacturer of the adhesive. Information about conditioning of the specimen shall be included in the test report. A joint completely filled with adhesive is essential for the reliability of the test. The two adherends shall be bonded coaxially, with a maximum la

32、teral displacement between their two axes of 0,002 ro(= outer radius), and a maximum angular deviation so that the bond line thickness varies by no more than 5 % of the recommended thickness. The joining device shall prevent the adhesive from running out of the joint and any displacement of the two

33、adherends during curing. NOTE To achieve this, the two hollow cylinders may be aligned with the help of a plug made of polytetrafluoroethylene (PTFE) or any other suitable device. A temperature-resistant O-ring, inserted into the PTFE plug and placed just below the bond, stops the adhesive from runn

34、ing out of the joint. At the other ends of the adherends, two plates fastened to a threaded rod passing through the PTFE plug prevent any displacement during curing (see Figure 2). BS EN 14869-1:2011EN 14869-1:2011 (E) 7 Key 1 Top plate 2 Polytetrafluoroethylene plug 3 Adhesive layer 4 O-ring 5 Rod

35、with screw thread 6 Bottom plate Figure 2 Coaxially aligned hollow cylinders in a suitable joining device BS EN 14869-1:2011EN 14869-1:2011 (E) 8 6.1.4 Adhesive bond The preferred thickness of the bond is 0,2 mm. NOTE For special adhesives, a thickness in the range from 0,05 mm to 0,5 mm can be used

36、. The thickness of the bond may be defined by the use of a bondline thickness material included in the adhesive, such as glass beads, a net or cloth consistent with the adhesive manufacturers recommendations. The adhesive shall be prevented from running out of the joint using a non-adherent flexible

37、 band around the outside of the two adherends. Alternatively, the thickness of the bond can be defined by a rim which is machined along the outer perimeter of one adherend. The rim acts as spacer between the two adherends. The adhesive is applied to the machined adherend to fill the space adjacent t

38、o the rim, prior to joining the two adherends. The rim is removed on the lathe after the adhesive is cured (see Figure 3). The resulting adhesive layer shall have a width at least ten times its thickness. BS EN 14869-1:2011EN 14869-1:2011 (E) 9 Dimensions in millimetres Key 1 Adherends 2 Adhesive 3

39、Bolt 4 Fixture NOTE The rim spacer that controls the thickness of the bond is shown in the upper detail view. Before testing, the spacer is removed, as shown in the lower details view. Figure 3 Dimensions of the specimen and specimen holders BS EN 14869-1:2011EN 14869-1:2011 (E) 10 6.1.5 Dimensions

40、Three sizes of specimen (A, B, C) are recommended (see Table 1), although intermediate sizes are acceptable provided that: oirr 8,0 (1) where riis the inner radius of each cylinder; ro is the outer radius of each cylinder. The width of the bond (ro- ri) zone may be reduced to a minimum of 0,1 roif t

41、he available torque is not sufficient to produce failure of the specimen. Suitable values for the length of the specimen and the dimensions of the specimen holders are given in Figure 3. Table 1 Recommend specimen sizes Specimen Radiiro mm ri mm A B C 36 24 12 30 20 10 6.2 Number of specimens At lea

42、st five specimens shall be tested for a given adhesive. 7 Test conditions 7.1 Temperature The temperature of the test shall be one of the standard temperatures specified in EN ISO 291. The temperature of the specimen shall be measured at the outer surface of the hollow cylinder, close to the bond (e

43、.g. with thermocouples). Agreement to within 1 C is required. 7.2 Shear rate The rate of shear of the adhesive shall lie within the range from 0,000 5 s-1 to 0,02 s-1. NOTE The preferred rate of shear is 0,01 s-1. BS EN 14869-1:2011EN 14869-1:2011 (E) 11 The corresponding rate of angular displacemen

44、t () to be set on the torsion-testing machine is given by the equation: ord= (2) where d is the thickness of the adhesive bond, expressed in millimetres; ro is the outer radius of the specimen, expressed in millimetres (see Table 1). 8 Procedure Fix the specimens in the test apparatus, equipped with

45、 a temperature cabinet if required. Adjust the apparatus so that the joint is free from any load. While increasing the shear deformation continuously up to the requested maximum value, record the torque displacement curve. If the specimen fails, check the surfaces of the bonded parts and reject any

46、specimens with incompletely filled adhesive bonds (due e.g. to the presence of bubbles or voids). Sometimes the adhesive layer will not fail after reaching the maximum shear deformation, especially when loading with a low shear rate. If this happens, repeat the test with an increasing torque rate un

47、til the specimen fails. As before, check the adhesive layer for defects of fabrication. Ensure that cohesive failure is achieved. 9 Calculations 9.1 The shear stress, , expressed in megapascals, in the bond line close to the outer radius is given by the equation: 442ioorrrM= (3) where M is the torqu

48、e, expressed in newton millimetres, acting across the joint; ro is the outer radius, expressed in millimetres, of the cylinders; riis the inner radius, expressed in millimetres, of the cylinders. 9.2 The displacement (dm) measured during the test is composed of the displacement (da) of the adhesive

49、and the displacement due to the twist of the two adherends (dt) (see Figure 4). Therefore, the shear strain () ) in a bond of thickness (d) is given by the equation: =dddddtmatan (4) where da, dm, dtand d are measured in millimetres; dtis calculated from the shear modulus Gtof the adherend material and the shear stress acting in the adherends (alternatively, the deformation of the adherends dtmay be determined experimentally at BS EN 14869-1:2011EN 14869-1:2011 (E) 1

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1