1、BRITISH STANDARDBS EN 14879-2:2006Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 2: Coatings on metallic componentsThe European Standard EN 14879-2:2006 has the status of a British StandardICS 25.220.60g49g50g3g
2、38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14879-2:2006This British Standard was published under the authority of the Standards Policy and Strateg
3、y Committee on 31 January 2007 BSI 2007ISBN 978-0-580-49918-0National forewordThis British Standard was published by BSI. It is the UK implementation of EN 14879-2:2006. The UK participation in its preparation was entrusted to Technical Committee ISE/16, Protective coatings and linings of metal pipe
4、s and fittings.A list of organizations represented on ISE/16 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunit
5、y from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14879-2December 2006ICS 25.220.60English VersionOrganic coating systems and linings for protection of industrialapparatus and plants against corrosion caused by aggress
6、ivemedia - Part 2: Coatings on metallic componentsSystmes de revtements organiques de peinture et autresrevtements rapports pour la protection des appareils etinstallations industriels contre la corrosion par des milieuxagressifs - Partie 2: Revtements pour composantsmtalliquesBeschichtungen und Aus
7、kleidungen aus organischenWerkstoffen zum Schutz von industriellen Anlagen gegenKorrosion durch aggressive Medien - Teil 2:Beschichtungen fr Bauteile aus metallischen WerkstoffenThis European Standard was approved by CEN on 25 October 2006.CEN members are bound to comply with the CEN/CENELEC Interna
8、l Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.Thi
9、s European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the n
10、ational standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Ki
11、ngdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14879-2:2006: EEN 148
12、79-2:2006 (E) 2 Contents Page Foreword5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 General8 4.1 Selection criteria8 4.1.1 General8 4.1.2 Exposing media .8 4.1.3 Type and frequency of fluid loading11 4.1.4 Thermal loading .11 4.1.5 Changes in temperature11 4.1.6 Mechanical loadin
13、g12 4.1.7 Climatic influences 12 4.1.8 Additional requirements .12 4.2 Load profile 12 4.3 Requirements.12 4.3.1 Components.12 4.3.2 Coating materials.12 4.3.3 Coating system 13 4.3.4 Coated components 14 5 Coating systems 14 5.1 Laminate coating systems14 5.1.1 Coating system design .14 5.1.2 Descr
14、iption of layers .15 5.1.3 General requirements15 5.1.4 Coating process.17 5.1.5 Requirements for the coating system .19 5.2 Trowelled coating systems.20 5.2.1 Coating system design .20 5.2.2 Description of layers .21 5.2.3 General requirements21 5.2.4 Coating process.22 5.2.5 Requirements for the c
15、oating system .24 5.3 Sprayed coating.26 5.3.1 Coating system design .26 5.3.2 Description of layers .26 5.3.3 General requirements27 5.3.4 Application .28 5.3.5 Requirements for the coating system .29 5.4 Powder coating 31 5.4.1 Coating system design .31 5.4.2 Description of layers .32 5.4.3 Compon
16、ent design and surface condition33 5.4.4 Coating materials.33 5.4.5 Ambient conditions .34 5.4.6 Surface preparation.34 5.4.7 Application .34 5.4.8 Requirements for the coating system .34 5.5 Protection of existent coatings 36 5.5.1 General36 5.5.2 Packaging and handling .36 5.5.3 Storage37 5.5.4 As
17、sembly 37 5.5.5 Repair37 6 Designation 38 EN 14879-2:2006 (E) 3 6.1 Laminate coating.38 6.2 Trowelled coating38 6.3 Sprayed coating.39 6.4 Powder coating39 7 Testing39 7.1 General .39 7.2 Suitability testing.39 7.3 Receiving inspection of coating material .40 7.3.1 General .40 7.3.2 Container markin
18、g.40 7.3.3 Viscosity or flow time40 7.3.4 Density40 7.3.5 Colour .40 7.3.6 Non-volatile matter content40 7.3.7 Gel time 40 7.3.8 Binders .40 7.4 Testing of coating systems during application40 7.4.1 General .40 7.4.2 Suitability of component for coating.40 7.4.3 Ambient conditions.41 7.4.4 Applicati
19、on method.41 7.4.5 Thickness of coating layers .41 7.5 Acceptance testing41 7.5.1 General .41 7.5.2 Acceptance testing of coated component41 7.5.3 Acceptance testing of specimens .41 7.6 Routine testing 42 7.7 Inspection report .42 8 Suitability verification and tests 42 8.1 Requirements.42 8.1.1 Ge
20、neral .42 8.1.2 Laboratory testing.43 8.1.3 In-service testing (field tests).45 8.1.4 Testing on reference objects .45 8.2 Tests .45 8.2.1 Sample bodies .45 8.2.2 Fluid load, resistance and tightness .45 8.2.3 Thermal loading.47 8.2.4 Temperature change loading .47 8.2.5 Adhesion strength.47 8.2.6 A
21、geing behaviour 47 8.2.7 Dissipation capability48 Annex A (informative) Specimen form49 Annex B (informative) Information to be given by the coating material manufacturer .50 Annex C (informative) Information to be given by the coating manufacturer 51 Annex D (informative) Resistance of resins to va
22、rious chemicals at ambient temperature .52 Annex E (normative) Testing the dissipation capability .53 E.1 General .53 E.1.1 Dissipation resistance 53 E.1.2 Ground dissipating resistance.53 E.2 Testing the dissipation resistance of test samples .53 E.2.1 Instruments 53 E.2.2 Test procedure.53 E.2.3 T
23、est report53 E.3 Measuring the ground dissipation resistance on the laid surface protection system 54 E.3.1 Instruments 54 E.3.2 Preparation.54 EN 14879-2:2006 (E) 4 E.3.3 Test procedure.54 E.3.4 Test report 55 Annex F (normative) Test fluid groups for verification of suitability for material/media
24、combinations56 Annex G (informative) Selection criteria for surface protection systems .58 G.1 Load profiles and suitable protection for gutters, trenches, pipes etc58 G.2 Load profiles and suitable protection for containers 59 Annex H (informative) Sample form for acceptance inspection report .60 A
25、-Deviation: National deviation due to regulations, the alteration of which is for the time being outside the competence of the CEN/CENELEC member.61 Bibliography 62 EN 14879-2:2006 (E) 5 Foreword This document (EN 14879-2:2006) has been prepared by CEN/BT/Task Force 130 “Organic coating systems and
26、linings for protection of industrial apparatus and plants against corrosion caused by aggressive media”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Ju
27、ne 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. EN 14879 “Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media“ consists of the following parts: Part 1: Terminology, design and pr
28、eparation of substrate Part 2: Coatings on metallic components Part 3: Coatings on concrete components Part 4: Linings on metallic components Part 5: Linings on concrete components Part 6: Combined linings with tile and brick layers According to the CEN/CENELEC Internal Regulations, the national sta
29、ndards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal
30、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-land and United Kingdom. EN 14879-2:2006 (E) 6 1 Scope This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipment that will come in contact with che
31、mical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners or been given by national regulations). The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings
32、 which serve one or more of the following purposes: to protect the component from adverse effects of aggressive substances; to protect waters (e.g. ground water) against hazardous substances; to protect the charge from becoming contaminated by components released from the substrate material; to achi
33、eve a particular surface properties. The described coatings are to be used for metallic process engineering equipment that will come in contact with chemical substances. The different coating systems are: laminate coating systems which contain cold-curing resins; trowelled coating which contain cold
34、-curing resins; sprayed coating systems which contain resins (in special cases, such coatings may also be applied by brushing, rolling, flow coating, dipping, or by other means, such as providing sleeving for nozzles); powder coating systems which contain organic materials (powder coatings may be us
35、ed as corrosion pro-tection or for non-stick purposes). For design and preparation of substrate see EN 14879-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated referen
36、ces, the latest edition of the referenced document (including any amendments) applies. EN 59, Glass reinforced plastics Measurement of hardness by means of a Barcol impressor EN 228, Automotive fuels Unleaded petrol Requirements and test methods EN 590, Automotive fuels Diesel Requirements and test
37、methods EN 13687-3, Products and systems for the protection and repair of concrete structures Test methods Determination of thermal compatibility Part 3: Thermal cycling without de-icing salt impact EN 14879-1:2005, Organic coating systems and linings for protection of industrial apparatus and plant
38、s against corrosion caused by aggressive media Part 1: Terminology, design and preparation of substrate prEN 14879-4, Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 4: Linings on metallic components EN ISO 175,
39、Plastics Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999) EN 14879-2:2006 (E) 7 EN ISO 178, Plastics Determination of flexural properties (ISO 178:2001) EN ISO 291, Plastics Standard atmospheres for conditioning and testing (ISO 291:2005) EN ISO 52
40、7-3, Plastics Determination of tensile properties Part 3: Test conditions for films and sheets (ISO 527-3:1995) EN ISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 2811-1, Paints and varnishes Determination of density
41、Part 1: Pyknometer method (ISO 2811-1:1997) EN ISO 2811-2, Paints and varnishes Determination of density Part 2: Immersed body (plummet) method (ISO 2811-2:1997) EN ISO 2815, Paints and varnishes Buchholz indentation test (ISO 2815:2003) EN ISO 3001, Plastics Epoxy compounds Determination of epoxy e
42、quivalent (ISO 3001:1999) EN ISO 3251, Paint, varnishes and plastics Determination of non-volatile-matter content (ISO 3251:2003) EN ISO 3882, Metallic and other inorganic coatings Review of methods of measurement of thickness (ISO 3882:2003) EN ISO 4624, Paints and varnishes Pull-off test for adhes
43、ion (ISO 4624:2002) EN ISO 4625-1, Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method (ISO 4625-1:2004) EN ISO 8503-2, Preparation of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned stee
44、l substrates Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel Comparator procedure (ISO 8503-2:1988) EN ISO 12944-4, Paints and varnishes Corrosion protection of steel structures by protective paint sys-tems Part 4: Types of surface and surface preparation (ISO 12944
45、-4:1998) ISO 813, Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 peel method ISO 2559, Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications ISO 8130-2, Coating powders Part 2: Determination of density by gas comp
46、arison pyknometer (referee method) IEC 60093:1980, Methods of test for volume resistivity and surface resistivity of solid electrical insulating ma-terials IEC 60167, Methods of test for the determination of the insulation resistance of solid insulating materials 3 Terms and definitions For the purp
47、oses of this document, the terms and definitions given in EN 14879-1:2005 and the following apply. EN 14879-2:2006 (E) 8 3.1 fibre reinforced coatings resin coatings reinforced by means of glass, carbon or synthetic fibres, for the standard named “laminate coatings“ 3.2 contract partners coating mat
48、erial manufacturer, component manufacturer, person(s) responsible for applying the coating, and client ordering the coated component(s) 3.3 substrate surface on which a coating is applied 3.4 coating system (on a metallic component) continuous film on the surface of a metallic component, comprising
49、one or more layers, with a total system thickness of at least 100 m NOTE For non-stick coatings as in 5.4, the minimum total thickness is 50 m. 3.5 coating material (for use on a metallic component) cold- or heat-curing material, in liquid, paste or powder form, which will form a continuous film (coating) on the surface of a metallic component. Liquid coating materials may or may not contain solvents 3.6 total coating system thickness sum of the thickness of all layers
