1、BRITISH STANDARDBS EN 14879-5:2007Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 5: Linings on concrete componentsThe European Standard EN 14879-5:2007 has the status of a British StandardICS 25.220.60g49g50g3g3
2、8g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 14879-5:2007This British Standard was published under the authority of the Standards Policy and Strategy
3、 Committee on 31 August 2007 BSI 2007ISBN 978 0 580 55809 2National forewordThis British Standard is the UK implementation of EN 14879-5:2007. The UK participation in its preparation was entrusted to Technical Committee ISE/16, Protective coatings and linings of metal pipes and fittings.A list of or
4、ganizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obliga
5、tions.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 14879-5August 2007ICS 25.220.60English VersionOrganic coating systems and linings for protection of industrialapparatus and plants against corrosion caused by aggressivemedia - Part 5: Li
6、nings on concrete componentsSystmes de revtements organiques de peinture et autresrevtements rapports pour la protection des appareils etinstallations industriels contre la corrosion par des milieuxagressifs - Partie 5: Revtements rapports pour btonBeschichtungen und Auskleidungen aus organischenWer
7、kstoffen zum Schutz von industriellen Anlagen gegenKorrosion durch aggressive Medien - Teil 5: Auskleidungenfr Bauteile aus BetonThis European Standard was approved by CEN on 24 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giv
8、ing this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versi
9、ons (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bu
10、lgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDI
11、ZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14879-5:2007: EEN 14879-5:2007 (E) 2 Contents Page Foreword
12、4 1 Scope 5 2 Normative references 5 3 Terms and definitions .7 4 Concepts and selection criteria .8 4.1 Surface protection types and systems8 4.2 Selection criteria9 4.3 Load profile 13 5 Concepts.13 5.1 Lining materials .13 5.2 Lining materials manufacturer .13 5.3 Applicator .13 6 Materials .13 6
13、.1 Materials for bonded linings.13 6.2 Materials for mechanically fixed linings15 6.3 Materials for loose linings 16 7 Application .17 7.1 Bonded linings.17 7.2 Mechanically fixed linings 18 7.3 Loose linings20 8 Designations 21 9 Testing 21 9.1 General21 9.2 Suitability testing.22 9.3 Checking the
14、substrate .22 9.4 Receiving of lining materials 22 9.5 In-process testing of lining.22 9.6 Checking the completed lining.22 9.7 Tests during the application works .23 9.8 Inspection report23 10 Suitability verification and tests.23 10.1 Requirements.23 10.2 Tests26 Annex A (informative).41 Annex B (
15、informative) Selection criteria for surface protection systems .42 B.1 Load profiles and suitable surface protection systems for floors and walls42 B.2 Load profiles and suitable surface protection systems for secondary containments.43 B.3 Load profiles and suitable protection for production plant f
16、loors .44 EN 14879-5:2007 (E) 3 B.4 Load profiles and suitable protection for collecting basins, gutters, channels, pipes etc. 45 B.5 Load profiles and suitable protection for containers 46 Annex C (informative) Sample form for acceptance inspection report .47 Annex D (normative) Overview of verific
17、ation of suitability for linings.48 Annex E (normative) Test fluid groups for verification of suitability for material/media combinations .49 Annex F (normative) Media lists for elastomer linings52 Annex G (normative) Testing the dissipation capability.54 G.1 General .54 G.1.1 Dissipation resistance
18、 54 G.1.2 Ground dissipating resistance.54 G.2 Testing the dissipation resistance of test samples .54 G.2.1 Instruments 54 G.2.2 Test procedure.54 G.2.3 Test report54 G.3 Measuring the ground dissipation resistance on the laid surface protection system 55 G.3.1 Instruments 55 G.3.2 Preparation.55 G.
19、3.3 Test procedure.55 G.3.4 Test report56 Annex H (informative) Check list and sample form for inspection schedule .57 Annex I (informative) Adeviations .60 Bibliography61 EN 14879-5:2007 (E) 4 Foreword This document (EN 14879-5:2007) has been prepared by Working Group CEN/BT/Task Force 130 “Organic
20、 coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement
21、, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. EN 14879 “Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media“ consists of the following parts: Part
22、1: Terminology, design and preparation of substrate Part 2: Coatings on metallic components Part 3: Coatings on concrete components Part 4: Linings on metallic components Part 5: Linings on concrete components Part 6: Combined linings with tile and brick layers According to the CEN/CENELEC Internal
23、Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
24、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 14879-5:2007 (E) 5 1 Scope This document describes the requirements for and methods of testing of organic linings which are applied to concrete process engineering equipment that wil
25、l come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners). The standard applies to linings which serve one or more of the following purposes: to pro
26、tect the component from damaging effects of aggressive substances; to protect waters (e.g. ground water) from harmful substances; to protect the charge from becoming contaminated by components released from the substrate material; to achieve a particular surface quality. The different lining systems
27、 are: a) bonded linings; b) mechanically fixed linings; c) loose linings of sheeting material; d) loose linings of pre-formed pieces or lining units. Handling of aggressive or water pollutant materials is understood to include e) storage; f) filling; g) loading and unloading; h) manufacture; i) trea
28、tment; j) use. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 228, Aut
29、omotive fuels Unleaded petrol Requirements and test methods EN 590, Automotive fuels Diesel Requirements and test methods EN 1766, Products and systems for the protection and repair of concrete structures Test methods Reference concretes for testing EN 10204, Metallic products Types of inspection do
30、cuments EN 14879-5:2007 (E) 6 EN 13067, Plastics welding personnel Qualification testing of welders Thermoplastic welded assemblies EN 13501-1, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13813, Screed material a
31、nd floor screeds Screed material Properties and requirements EN 14879-1:2005, Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 1: Terminology, design and preparation of substrate EN 14879-4, Organic coating system
32、s and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 4: Linings on metallic components EN ISO 75-1, Plastics Determination of temperature of deflection under load Part 1: General test method (ISO 75-1:2004) EN ISO 175, Plastics Methods of
33、test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999) EN ISO 178, Plastics Determination of flexural properties (ISO 178:2001) EN ISO 179 (all parts), Plastics Determination of Charpy impact properties EN ISO 527-3, Plastics Determination of tensile properties Par
34、t 3: Test conditions for films and sheets (ISO 527-3:1995) EN ISO 846:1997, Plastics Evaluation of the action of microorganisms (ISO 846:1997) EN ISO 868, Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 1133, Plastics - Determ
35、ination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) EN ISO 1183-1, Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183- 1:2004) EN ISO 2286 (
36、all parts), Rubber- or plastics-coated fabrics Determination of roll characteristics EN ISO 6721-2, Plastics Determination of dynamic mechanical properties Part 2: Torsion-pendulum method (ISO 6721-2:1994, including Technical Corrigendum 1:1995) EN ISO 14632, Extruded sheets of polyethylene (PE-HD)
37、Requirements and test methods (ISO 14632:1998) EN ISO 15013, Extruded sheets of polypropylene (PP) Requirements and test methods (ISO 15013:1998) EN ISO 22088-4, Plastics Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006) IEC
38、 60093:1980, Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials IEC 60167, Methods of test for the determination of the insulation resistance of solid insulating materials ISO 37, Rubber, vulcanized or thermoplastic Determination of tensile stress
39、-strain properties ISO 554, Standard atmospheres for conditioning and/or testing Specifications EN 14879-5:2007 (E) 7 ISO 813, Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method 3 Terms and definitions For the purposes of this document, the terms
40、 and definitions given in EN 14879-1:2005 and the following apply. NOTE The terms used to designate structural elements requiring surface protection are usually based on the function of the elements in the process plant. For the sake of consistency, the most common of these elements are referred to
41、here on the basis of their function within the structure. 3.1 floor (bottom) flat or inclined surface, such as the floor of a production or storage area, and the bottom of a vessel 3.2 wall vertical or almost vertical limiting surface, such as the wall of a production and storage area, and the wall
42、of a vessel 3.3 ceiling (top) upper limiting surface, such as the ceiling of a production and storage area, and the top of a vessel 3.4 gutter open indentation, moulded in the floor, through which fluids may drain away 3.5 trench open or covered element in the floor of any shape or size, whose inver
43、t is considerably lower than the floor, and through which fluids may drain away 3.6 pipe hollow cylinder of any shape or size, through which fluids, gases and vapours may pass 3.7 sump depression in the floor, designed as the lowest point from which collected substances can be drained off EN 14879-5
44、:2007 (E) 8 3.8 collecting basin tight basin or area designed to collect any water pollutants leaking in an emergency 3.9 tank open or closed facility of any shape or size designed to contain permanently fluids, solids, gases and vapours NOTE Typical designations for containers are basin, cistern, v
45、essel and tank 4 Concepts and selection criteria 4.1 Surface protection types and systems 4.1.1 General Surface protection is usually applied as a lining as in 4.1.2 and Clause 5, as a coating as in EN 14879-3 or as a composite coating or lining system as in prEN 14879-6. The last of these combines
46、a chemically resistant sealing coat with a wearing layer. 4.1.2 Protective linings Linings based on organic binders, such as a) Bonded linings Bonded linings comprise pre-fabricated sheets that are fixed to the substrate by means of an adhesive applied over the entire surface area. The sheets are th
47、en jointed using an adhesive or by welding. b) Mechanically fixed linings Linings made of thermoplastic units (e.g. sheets, slabs or pre-formed pieces) that are fixed to the concrete substrate by means of fasteners systematically arranged on the units underside. The lining units are then jointed by
48、welding. These linings may be applied either during the construction of the concrete member or after construction has been completed, in which case the lining is attached to a layer of facing concrete. c) Loose linings of sheeting material Pre-fabricated linings that are laid loosely on the substrat
49、e, jointed and then fixed to the walls by means of metal beads, for example. The sheets are usually surfaced with gravel or screed, or protected against exposure to sunlight, warping and mechanical damage by means of a masonry facing. d) Loose linings of pre-formed pieces or linings units Linings made of pre-formed pieces laid in the concrete member and then fixed or welded at the top edge, if necessary. EN 14879-5:2007 (E) 9 4.2 Selection criteria 4.2.1 General The stress to be encoun
