1、BRITISH STANDARDBS EN 15614:2007Protective clothing for firefighters Laboratory test methods and performance requirements for wildland clothingThe European Standard EN 15614:2007 has the status of a British StandardICS 13.340.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g
2、53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15614:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2007 BSI 2007ISBN 978 0 580 57950 9Nationa
3、l forewordThis British Standard was published by BSI. It is the UK implementation of EN 15614:2007. The UK participation in its preparation was entrusted by Technical Committee PH/3, Protective clothing, to Subcommittee PH/3/2, Clothing for protection against heat and flame.A list of organizations r
4、epresented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendme
5、nts issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15614June 2007ICS 13.340.10English VersionProtective clothing for firefighters - Laboratory test methods andperformance requirements for wildland clothingVtements de protection pour sapeurs-pompiers -
6、Mthodes dessai de laboratoire et exigences deperformance pour vtements ports pendant la lutte contreles feux despaces naturelsSchutzkleidung fr die Feuerwehr - Laborprfverfahren undLeistungsanforderungen fr Schutzkleidung fr dieBrandbekmpfung im freien GelndeThis European Standard was approved by CE
7、N on 10 May 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may b
8、e obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Ma
9、nagement Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor
10、way, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form an
11、d by any means reservedworldwide for CEN national Members.Ref. No. EN 15614:2007: EEN 15614:2007 (E) 2 Contents Page Foreword4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 Clothing design9 4.1 General9 4.2 Collar.9 4.3 Coverall or suit.9 4.4 Pockets .9 4.5 Hardware
12、.10 4.6 Sleeves10 4.7 Trousers10 5 Sampling and pre-treatment.10 5.1 Sampling.10 5.2 Number and size of specimen10 5.3 Pre-treatment10 5.3.1 General10 5.3.2 Cleaning10 5.3.3 Ageing.11 5.4 Conditioning.11 5.5 Exposure surface.11 6 Thermal requirements .11 6.1 General11 6.2 Flame spread11 6.2.1 Genera
13、l11 6.2.2 Testing in accordance with EN ISO 15025:2002, Procedure A (Code letter A1) .11 6.2.3 Testing in accordance with EN ISO 15025:2002, Procedure B (Code letter A2) .12 6.3 Heat transfer (radiation) 12 6.4 Heat resistance 12 6.5 Heat resistance of the sewing thread 13 7 Mechanical requirements1
14、3 7.1 Tensile strength .13 7.2 Tear strength13 7.3 Main seam strength .13 8 Ergonomic and comfort requirements 13 8.1 Thermal resistance 13 8.2 Water vapour resistance .13 9 General requirements14 9.1 Dimensional change after washing and/or dry cleaning .14 9.2 Retroreflective and/or fluorescent per
15、formance 14 10 Marking .14 11 Information supplied by the manufacturer .15 Annex A (informative) Uncertainty of measurement .16 EN 15614:2007 (E) 3 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC .17 Bibliography18 EN 15614
16、:2007 (E) 4 Foreword This document (EN 15614:2007) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by
17、publication of an identical text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn at the latest by December 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, a
18、nd supports essential requirements of EU Directive 89/686/EEC. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to
19、implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer
20、land and United Kingdom. EN 15614:2007 (E) 5 Introduction The purpose of this European Standard is to provide minimum performance requirements for protective clothing designed for use for extended periods during wildland firefighting and associated activities. Wildland firefighting involves work pri
21、marily in summer temperatures, for many hours during which the firefighter may develop high levels of metabolic heat. Consequently the protective clothing should be light, flexible and commensurate with the risks to which the firefighter may be exposed in order to be effective without introducing he
22、at stress to the wearer. Accordingly a risk assessment should be undertaken to determine if the clothing covered by this European Standard is suitable for its intended use and the expected exposure. This European Standard does not cover clothing for use in situations where clothing complying with EN
23、 469 is more suitable, nor does this European Standard cover clothing to protect against chemical, biological or radiation hazards. The risk assessment should include what additional personal protective equipment is necessary for head, hands and feet. In some situations respiratory protection may be
24、 required. Firefighters should be trained in the selection, use, care and maintenance of the protective clothing covered by this European Standard, including an understanding of its limitation. Nothing in this European Standard is intended to restrict any jurisdiction, purchaser or manufacturer from
25、 exceeding the minimum requirements in this standard. A list of standards related to EN 15614 is given in the Bibliography. EN 15614:2007 (E) 6 1 Scope This European Standard specifies methods of test and minimum performance requirements for protective clothing, designed to protect the wearers body,
26、 except the head, hands and feet, to be worn in wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This European Standard covers the general design of the clothing, the minimum level of performance for the materials employed a
27、nd the methods of test to determine these levels. This European Standard is not applicable to clothing for use in situations encountered in structural firefighting (EN 469 and ISO 11613) or where a high level of infrared radiation is expected (EN 1486), nor does this European Standard cover clothing
28、 to protect against chemical, biological, electrical or radiation hazards. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referen
29、ced document (including any amendments) applies. EN 340:2003, Protective clothing General requirements EN 471:2003, High-visibility warning clothing for professional use Test methods and requirements EN 25077, Textiles Determination of dimensional change in washing and drying (ISO 5077:1984) EN 3109
30、2, Textiles Determination of physiological properties Measurement of thermal and watervapour resistance under steadystate conditions (sweating guarded hotplate test) (ISO 11092:1993) EN ISO 139, Textiles Standard atmospheres for conditioning and testing (ISO 139:2005) EN ISO 3146, Plastics Determina
31、tion of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000) EN ISO 6942:2002, Protective clothing Protection against heat and fire Method of test: Evaluation of materials and material assemblies whe
32、n exposed to a source of radiant heat (ISO 6942:2002) EN ISO 13934-1, Textiles Tensile properties of fabrics Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999) EN ISO 13935-2, Textiles Seam tensile properties of fabrics and made-up textil
33、e articles Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999) EN ISO 13937-2, Textiles Tear properties of fabrics Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2-2000) EN ISO 15025:2002, Protective cl
34、othing Protection against heat and flame Method of test for limited flame spread (ISO 15025:2000) ISO 17493, Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven CIE 54.2, Retroreflection Definition and measurement 3 Terms and
35、 definitions For the purpose of this document, the following terms and definitions apply. EN 15614:2007 (E) 7 3.1 ageing change of the product performance over time during use or storage. Ageing is caused by a combination of several factors, such as: cleaning, maintenance or disinfecting processes;
36、exposure to visible and/or ultra-violet radiation; exposure to high or low temperatures or to changing temperatures; exposure to chemicals including humidity; exposure to biological agents such as bacteria, fungi, insects or other pests; exposure to mechanical action such as abrasion, flexing, press
37、ure and strain; exposure to contaminants such as dirt, oil, splashes of molten metal etc.; exposure to wear and tear 3.2 cleaning process by which a PPE is made again serviceable and/or hygienically wearable by removing any dirt or contamination. NOTE A cleaning cycle is typically a washing plus dry
38、ing or a dry cleaning treatment followed, if required, by ironing or other finishing 3.3 cleaning cycle wash and a drying cycle or dry cleaning cycle 3.4 closure system method of fastening the openings in the garment including combinations of more than one method of achieving a secure closure, for e
39、xample a slide fastener covered by an overlap fastened down with a touch and close fastener NOTE This term does not cover seams. 3.5 component assembly combination of all materials of a multi-layer garment presented exactly as the finished garment construction 3.6 conditioning keeping the samples un
40、der standard conditions of temperature and relative humidity for a minimum period of time 3.7 protective coverall one piece garment that completely covers the wearers torso, arms and legs. Clothing which covers or replaces personal clothing and which is designed to provide protection for the firefig
41、hters upper and lower torso, neck, arms and legs, but excluding the head, eyes, hands and feet EN 15614:2007 (E) 8 3.8 protective garment individual item of protective clothing the wearing of which provides protection against specified hazards to the part of the body that it covers EXAMPLE Coat or s
42、hirt, trouser, or coverall. 3.9 hardware non-fabric items used in protective clothing including those made of metal or plastic EXAMPLE Fasteners, rank marking, buttons etc. 3.10 innermost lining lining of the innermost face of a component assembly closest to the wearers skin NOTE Where the innermost
43、 lining forms a part of a material combination, the material combination is to be regarded as the innermost lining. 3.11 interlining layer between the outermost layer and the innermost lining in a multilayer garment 3.12 main seam seam which is necessary to maintain the integrity of the garment 3.13
44、 material combination material produced from a series of separate layers, intimately combined prior to the garment manufacturing stage EXAMPLE Quilted material. 3.14 outer material outermost material of which the protective clothing is made 3.15 pre-treatment standard way of preparing the samples be
45、fore testing. This might include e.g. a number of cleaning cycles, submitting the sample to heat, mechanical action or any other relevant exposure and is finished by conditioning 3.16 seam method of permanent fastening between two or more pieces of material 3.17 protective suit upper and lower garme
46、nt worn together that completely covers the wearers torso, arms and legs and their neck, ankles and wrists 3.18 wildland fire fighting suppression action involving a fire in vegetative fuels such as forest, crops, plantations, grass or farmland EN 15614:2007 (E) 9 4 Clothing design 4.1 General Prote
47、ctive clothing for firefighters capable of satisfying the levels of performance specified in this European Standard shall protect the wearers body, except the head, hands and feet. It may be comprised of: a coverall, a suit provided with an interface area, or a number of inner and/or outer garments
48、designed to be worn together. Clothing shall not restrict the wearer in any of the movements expected to be made during wildland firefighting. Closure systems, label accessories, touch and close fasteners, retroreflective and/or fluorescent materials etc. attached to the protective clothing shall be
49、 designed to not adversely affect the clothings performance. All closure systems shall be designed to prevent the entry of burning debris. Conformity shall be checked by visual inspection and practical testing, such as to check sizing and correct fit by donning and doffing of the garment. 4.2 Collar The collar shall be able to remain in the vertical position when it is set upright. All protective clothing which encircles the neck shall have a closure system at the level of the line of the collar. Conf
