EN 15798-2010 en Products used for the treatment of swimming pool water - Filter media《游泳池水的处理用产品 过滤介质》.pdf

上传人:bowdiet140 文档编号:715367 上传时间:2019-01-04 格式:PDF 页数:16 大小:687.85KB
下载 相关 举报
EN 15798-2010 en Products used for the treatment of swimming pool water - Filter media《游泳池水的处理用产品 过滤介质》.pdf_第1页
第1页 / 共16页
EN 15798-2010 en Products used for the treatment of swimming pool water - Filter media《游泳池水的处理用产品 过滤介质》.pdf_第2页
第2页 / 共16页
EN 15798-2010 en Products used for the treatment of swimming pool water - Filter media《游泳池水的处理用产品 过滤介质》.pdf_第3页
第3页 / 共16页
EN 15798-2010 en Products used for the treatment of swimming pool water - Filter media《游泳池水的处理用产品 过滤介质》.pdf_第4页
第4页 / 共16页
EN 15798-2010 en Products used for the treatment of swimming pool water - Filter media《游泳池水的处理用产品 过滤介质》.pdf_第5页
第5页 / 共16页
点击查看更多>>
资源描述

1、BS EN 15798:2010ICS 13.060.25; 71.100.80NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDProducts used for thetreatment of swimmingpool water FiltermediaThis British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 April

2、2010 BSI 2010ISBN 978 0 580 61784 3Amendments/corrigenda issued since publicationDate CommentsBS EN 15798:2010National forewordThis British Standard is the UK implementation of EN 15798:2010.The UK participation in its preparation was entrusted to TechnicalCommittee CII/59, Chemicals for drinking wa

3、ter treatment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer im

4、munityfrom legal obligations.BS EN 15798:2010EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15798 January 2010 ICS 71.100.80 English Version Products used for the treatment of swimming pool water - Filter media Produits utiliss pour le traitement de leau des piscines - Mdias filtrants Produkte

5、 zur Aufbereitung von Schwimm-und Badebeckenwasser - Filtermaterialien This European Standard was approved by CEN on 28 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national s

6、tandard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any ot

7、her language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmar

8、k, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATI

9、ON EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15798:2010: EBS EN 15798:2010EN 15798:2010 (E) 2 Contents Page Foreword 3Introduction .41 S

10、cope 52 Normative references 53 Description .54 Physical properties 55 Chemical properties 65.1 General 65.2 Impurities and main by-products .65.3 Water-extractable substances 65.4 Specific properties.66 Test methods 67 Labelling - Transportation - Storage 67.1 Means of delivery .67.2 Risk and safet

11、y labelling according to the EU Directives .77.3 Transportation regulations and labelling 77.4 Marking .77.5 Storage 8Annex A (informative) General information on filter media .9A.1 Origin 9A.2 Properties .9A.3 Use 9A.4 Rules for safe handling and use . 10A.5 Emergency procedures 10Bibliography . 12

12、BS EN 15798:2010EN 15798:2010 (E) 3 Foreword This document (EN 15798:2010) has been prepared by Technical Committee CEN/TC 164 “Water supply”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical tex

13、t or by endorsement, at the latest by July 2010, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible fo

14、r identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Franc

15、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15798:2010EN 15798:2010 (E) 4 Introduction In respect of potential adverse effects

16、on the quality of swimming pool water, caused by the products covered by this European Standard: a) this European Standard provides no information as to whether the products may be used without restriction in any of the Member States of the EU or EFTA; b) it should be noted that, while awaiting the

17、adoption of verifiable European criteria, existing national regulations concerning the use and/or the characteristics of these products remain in force. NOTE Conformity with this document does not confer or imply acceptance or approval of the products in any of the Member States of the EU or EFTA. T

18、he use of the products covered by this document is subject to regulation or control by National Authorities. BS EN 15798:2010EN 15798:2010 (E) 5 1 Scope This European Standard is applicable to filter media (virgin granular activated carbon, silica sand and silica gravel, pumice, pyrolyized coal mate

19、rial, anthracite and calcium carbonate) used for treatment of swimming pool water. It describes the characteristics of filter media and specifies the requirements and the corresponding test methods for filter media. It gives information on their use in swimming pool water treatment. This standard do

20、es not concern powdered diatomaceous earth, perilite, zeolite and similar materials used with filter cartridges. 2 Normative references The following referenced document is indispensable for the application of this document. For dated references, only the edition cited applies. For undated reference

21、s, the latest edition of the referenced document (including any amendments) applies. EN 1018, Chemicals used for treatment of water intended for human consumption Calcium carbonate EN 12485, Chemicals used for treatment of water intended for human consumption Calcium carbonate, high-calcium lime and

22、 half-burnt dolomite Test methods EN 12902, Products used for treatment of water intended for human consumption Inorganic supporting and filtering materials Methods of test EN 12904, Products used for treatment of water intended for human consumption Silica sand and silica gravel EN 12906, Products

23、used for treatment of water intended for human consumption Pumice EN 12907, Products used for treatment of water intended for human consumption Pyrolyzed coal material EN 12909, Products used for treatment of water intended for human consumption Anthracite EN 12915-1, Products used for the treatment

24、 of water intended for human consumption Granular activated carbon Part 1: Virgin granular activated carbon 3 Description For the identification, the commercial form and the chemical properties see the relevant subclauses of EN 1018, EN 12904, EN 12906, EN 12907, EN 12909 and EN 12915-1. 4 Physical

25、properties For the physical properties, the product shall conform to the requirements specified in the relevant subclauses of EN 12904, EN 12906, EN 12907, EN 12909 and EN 12915-1. BS EN 15798:2010EN 15798:2010 (E) 6 5 Chemical properties 5.1 General This document specifies the minimum purity requir

26、ements for filter media used for the treatment of swimming pool water. Limits are given for impurities commonly present in the products. Depending on the raw material and the manufacturing process other impurities may be present and, if so, this shall be notified to the user and when necessary to re

27、levant authorities. NOTE Users of the products should check national regulations in order to clarify whether it is of appropriate purity for treatment of swimming pool water, taking into account water quality, required dosage, and contents of other impurities and additives used in the products not s

28、tated in the product document. Limits have been given for impurities and chemical parameters where these are likely to be present in significant quantities from the current production process and raw materials. If the production process or raw materials lead to significant quantities of other impuri

29、ties, by-products or additives being present, this shall be notified to the user. 5.2 Impurities and main by-products For virgin granular activated carbon the content of ash, water and water-soluble material shall conform to the requirements specified in EN 12915-1. For calcium carbonate the impurit

30、ies and main by-products shall conform to the requirements specified in EN 1018. 5.3 Water-extractable substances For virgin granular activated carbon and pyrolyzed coal materials the level of water-extractable substances shall conform to the requirements specified in EN 12915-1 and EN 12907 respect

31、ively. NOTE Polycyclic Aromatic Hydrocarbons (PAH): the sum of the detected concentrations of fluoranthene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, benzo(ghi)perylene, indeno(1,2,3-cd)pyrene. 5.4 Specific properties For virgin granular activated carbon the iodine number of the po

32、wdered activated carbon shall be not less than 600 mg/g. NOTE In certain applications lower values are acceptable. 6 Test methods The methods for sampling and analysis are those specified in EN 12485, EN 12902 and EN 12915-1. 7 Labelling - Transportation - Storage 7.1 Means of delivery Virgin granul

33、ar activated carbon shall be delivered in paper sacks (10 kg to 25 kg), semi-bulk containers (polypropylene bags, metal or cardboard drums, or corrugated boxes containing 200 kg to 800 kg), or in bulk (up to 50 m). BS EN 15798:2010EN 15798:2010 (E) 7 Pumice, silica sand, silica gravel, anthracite, p

34、yrolyzed coal material and calcium carbonate shall be delivered in bags, semi-bulk containers, or bulk. In order that the purity of the product is not affected, the means of delivery shall not have been used previously for any different product or it shall have been specially cleaned and prepared be

35、fore use. 7.2 Risk and safety labelling according to the EU Directives1)Virgin granular activated carbon, pumice, silica sand, silica gravel, calcium carbonate, anthracite and pyrolyzed coal material are not subject to labelling regulations at the date of the publication of this document. NOTE Annex

36、 I of the Directive 67/548/EEC on Classification, packaging and labelling of dangerous substances and its amendments and adaptations in the European Union contains a list of substances classified by the EU. Substances not in that Annex I should be classified on the basis of their intrinsic propertie

37、s according to the criteria in the Directive by the person responsible for the marketing of the substance. 7.3 Transportation regulations and labelling Steam virgin granular activated carbon, pumice, silica sand silica gravel, calcium carbonate, anthracite and pyrolyzed coal material are not dangero

38、us substances at the date of the publication of this document. Chemically activated virgin granular carbon is listed as UN Number2)1362. RID3) ADR4): class 4.2, classification code S2, packing group III. IMDG5): class 4.2. IATA6): Prohibited. 7.4 Marking The marking shall include the following : a)

39、the name: 1) “virgin granular activated carbon “; or 2) “pumice“; or 3) “silica sand“; or 4) “silica gravel“; or 5) “calcium carbonate“; or 6) “anthracite“; or 1) See Bibliography, 1.2) United Nations Number. 3) Regulations concerning International carriage of Dangerous goods by rail. 4) European Ag

40、reement concerning the international carriage of Dangerous goods by Road. 5) International Maritime transport of Dangerous Goods. 6) International Air Transport Association. BS EN 15798:2010EN 15798:2010 (E) 8 7) “pyrolyzed coal material“; b) trade name, grade or particle size range; c) the net mass

41、; d) the name and address of supplier and/or manufacturer; e) the statement “This product conforms to EN 15798“. 7.5 Storage 7.5.1 Long term stability Pumice, silica sand, silica gravel, anthracite and pyrolyzed coal material can be stored for an unlimited period of time. Calcium carbonate can be st

42、ored for unlimited period of time if kept dry. Virgin granular activated carbon is stable but hygroscopic. It can be stored for an unlimited time if kept dry and away from volatile materials. 7.5.2 Storage incompatibilities Virgin granular activated carbon shall be kept away from oxidants (e.g. hydr

43、ogen peroxide, potassium permanganate, chlorates, nitrates), volatile solvents and moisture. NOTE Local regulations could apply to bulk storage (e.g. in silos). Calcium carbonate shall be kept away from acids. BS EN 15798:2010EN 15798:2010 (E) 9 Annex A (informative) General information on filter me

44、dia A.1 Origin A.1.1 Raw materials Virgin granular activated carbon can be produced from virtually any carbonaceous material, e.g. coal, lignite, peat, coconut shell and wood. Natural pumice, natural silica sand, silica gravel, natural anthracite coal, natural coal and natural limestone. A.1.2 Manuf

45、acturing process For activated carbon, the carbonaceous material is subjected to controlled oxidation during which a highly porous structure is developed. The raw material is activated, thermally (most common) or chemically. Thermal activation involves heating to between 800 C and 1 100 C in the pre

46、sence of an oxidizing gas (usually steam) under carefully controlled conditions for several hours. Chemical activation involves heating to between 400 C and 700 C in the presence of a dehydrating agent (e.g. phosphoric acid). After activation the material is cooled, then prepared, e.g. by pulverizin

47、g and sieving to extract the desired particle size, and packaged. Pumice, silica sand and silica gravel are produced by quarrying, dredging or crushing, cleaning, drying, and sieving. Calcium carbonate is manufactured by quarrying, crushing, cleaning and subsequent screening of natural limestone or

48、carbonisation of calcium hydroxide. Anthracite is produced by mining, crushing, cleaning, drying and sieving. Pyrolyzed coal material is produced from natural coal, thermally treated in a special oven, and sieved. A.2 Properties For the particle size range, the density, the chemical composition, the

49、 adsorption properties and the hydraulic characteristics see the relevant subclauses in the annex of EN 1018, EN 12904, EN 12906, EN 12907, EN 12909 and EN 12915-1. A.3 Use A.3.1 Function Virgin granular activated carbon and pyrolyzed coal material are used for the removal of excess oxidants such as chlorine, ozone and permanganate from swimming pool water. They can be used to prevent fouling of resins and/or membranes. If granular activated carbon or pyroly

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1